Abstract
As area density increases in magnetic recording, spacing between head and disk is required to be below lOnm. Under such ultra-low spacing, it necessitates that ABS design should be good at not only static performances, e.g. flying height, pitch & roll, but also dynamic performances, e.g. HDI (head disk interface) robustness.
In this paper, we developed a new dynamics testing to evaluate the HDI robustness using AE sensor and LDV. The HDI robustness will be discussed in terms of ABS design concepts.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Talke, F.E., 1990, “Dynamic behavior of slider bearings during slider/disk contacts”. Proceedings of the Japan International Tribology Conference, pp. 1309–1312.
Su, L.Z., 2002, “Active control of friction between head-sliders and disk for magnetic memory devices”, PhD dissertation, Tohoku University, Sendai, Japan.
Liu, B., 2005, “Head disk interface technology: challenges and approaches”, JSME International Journal, Series C. Vol.48, No.3, pp.325–328.
Thornton, B.H., 2003, “Head-disk interface dynamics of ultra-low flying air bearing sliders for hard-disk drive applications”. PhD dissertation, University of California, Berkeley USA.
Mitsuya, Y, Deng Z, Ohka M., 1999, “Dynamic Analysis of the Rarefaction-Modified Reynolds Equation Considering Porosity of Thin Liquid Lubricant Film”, Journal of Tribology, Vol. 121, Issue 4, pp. 864–871.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2009 Tsinghua University Press, Beijing and Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Deng, Z.S., Lam, E.L.P., Su, L.Z., Leung, E.C.W. (2009). Dynamic Testing for Evaluation of HDI Robustness. In: Luo, J., Meng, Y., Shao, T., Zhao, Q. (eds) Advanced Tribology. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-03653-8_189
Download citation
DOI: https://doi.org/10.1007/978-3-642-03653-8_189
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-03652-1
Online ISBN: 978-3-642-03653-8
eBook Packages: EngineeringEngineering (R0)