Abstract
One of medical RFID system uses 13.56MHz as a carrier frequency. This type of RFID tag is used identification of patient, staff, medical equipments and so on. On the other hand, a new technique for LAN is developed. It is named PLC (Power Line Communication). In the system, AC power supply line is used for communication. The signal is transmitted by SW band carrier. However, the PLC signal is very noisy. The signal may affect some information equipments that are located near by AC power supply line. Medical use 13.56 MHz RFID systems also uses same band. Identification of the 13.56 MHz medical RFID tags may be affected by PLC. On the other hand, electric lamp shaped fluorescent tube is also noisy. In this study noise level of PLC and electric lamp shaped fluorescent tube are analyzed for risk management of medical RFID system. In the result of the experiment, it is recognized that the noise level of PLC and electric lamp shaped fluorescent tube are critical for medical RFID system.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2009 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Hosaka, R. (2009). An analysis of PLC noise level for risk management of medical use RFID system. In: Vander Sloten, J., Verdonck, P., Nyssen, M., Haueisen, J. (eds) 4th European Conference of the International Federation for Medical and Biological Engineering. IFMBE Proceedings, vol 22. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-89208-3_245
Download citation
DOI: https://doi.org/10.1007/978-3-540-89208-3_245
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-89207-6
Online ISBN: 978-3-540-89208-3
eBook Packages: EngineeringEngineering (R0)