Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
8 Quality and Reliability Assurance During the Production Phase
Production Processes
Desplas E.P., “Rel. in the manufacturing cycle”, Proc. Ann. Rel. & Maint. Symp., 1986, pp. 139–44.
DGQ 16-31/-32/-33: SPC 1/2/3 Statistische Prozesslenkung, 1990.
Ellis B.N., Cleaning and Contamination of Electronics Components and Assemblies, 1986, Electrochemical Publ., Ayr (Scotland).
Hnatek E. R., Integrated Circuit Quality and Reliability, 2nd Ed. 1999, Dekker, NY.
Grossmann G., “Contamination of various flux-cleaning combinations on SMT assemblies, Soldering & SMT, 22 (1996) Feb., pp. 16–21
Lea C, A Scientific Guide to SMT, 1988, Electrochemical Publ., Ayr (Scotland).
Lenz E., Automatisiertes Löten elektronischer Baugruppen, 1985, Siemens, Munich.
Pawling J.F. (Ed.), Surface Mounted Assemblies, 1987, Electrochemical Publ., Ayr (Scotland).
Pecht M. et al., Contamination of Electronic Assemblies, 2002, CRC Press, NY.
Prasad R.P., Surface Mount Technology, 1989, Van Nostrand Reinhold, NY.
Shewhart W.A., “Quality control charts”, Bell Tech. Jurn., 5(1926) pp. 593–603.
Scraft R., Bleicher M. (Eds.), Oberflächenmontage elektronischer Bauelemente, 1987, Hütig, Heidelberg.
Stein R.E., Re-Engineering the Manufacturing System, 4th Printing 1996, Dekker, NY.
Vardaman J. (Ed.), Surface Mount Technology: Recent Jap. Dev, 1993, IEEE Press, Piscataway NJ.
Wassink R.J.K., Soldering in Electronic, 2nd Ed. 1989, Electrochemical Publ., Ayr (Scotland).
Test and Screening Strategies
Bennetts R.G., Introduction to Digital Board Testing, 1981, Crane Russak, NY.
Birolini A., “Möglichkeiten und Grenzen der Qualifikation, Prüfung und Vorbeh. von ICs”, QZ, 27 (1982) 11, pp. 321–326; “Prüfung und Vorbeh. von Bauelementen und Leiterplatten”, VDI-Bericht Nr. 519, pp. 49–61 1984; “VLSI testing and screening”, Journal of Env. Sciences (IES), May/June 1989, pp. 42–48; “Matériels électroniques: strategies de test et de déverminage”, La Revue des Lab. d’Essais, 1989 pp. 18–21; — and Grossmann G., “Experimentelle Ergebnisse zur Qualität und Zuverlässigkeit der SMT mit Pitch 0.5 mm”, me (1995) 5, pp. 28–33.
Bullock M., Designing SMT boards for in-circuit testability”, Proc. Int. Test Conf., 1987, pp.606–13.
De Cristoforo R.J., “Environmental stress screening-lesson learned”, Proc. Ann. Rel. & Maint. Symp., 1984, pp. 129–133.
Desplas E., “Reliability in the manuf. cycle”, Proc. Ann. Rel. & Maint. Symp., 1986, pp. 139–144.
Geniaux B. et al, Déverminage des matériels électroniques, 1986, ASTE, Paris; “Climatique et déverminage”, La Revue des Lab. d’Essais, Sept. 1989, pp. 5–8.
IEC 61163: Rel. Stress Screening-Part 1: Repair. Items, 2006;-Part 2: Electronic Comp., 1998.
IES, Environmental Stress Screening Guideline for Assemblies, 1988; Guidelines for Parts, 1985; Environmental Test Tailoring, 1986; Environmental Stress Screening, 1989.
Kallis J.M., Hammond W.K., Curry B., “Stress screening of electronic modules: Investigation of effects of temp. rate-of-change”, Proc. Ann. Rel. & Maint. Symp., 1990, pp. 59–66.
Kim K. et al., “Some considerations on system burn-in”, IEEE Trans. Rel., 54(2005)2, pp. 207–214.
Kindig W., McGrath J., “Vibration, random required”, Proc. Ann. Rel. & Maint. Symp., 1984, pp. 143–147.
MIL-HDBK-344: Environmental Stress Screening of Electronic Equipment, 1986; see also-HDBK-263,-STD-810,-STD-883, and-STD-2164.
Parker P., Webb C., “A study of failures identified during board level environmental stress testing”, IEEE Tran. Comp. Pack., and Manuf. Technol., 15(1992)6, pp. 1086–1092.
Pynn C., Strategies for Electronics Test, 1986, McGraw-Hill, NY.
Wennberg S.R., Freyler C.R., “Cost-effective vibration testing for automotive electronic”, Proc. Ann. Rel. & Maint. Symp., 1990, pp. 157–159.
Rights and permissions
Copyright information
© 2007 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
(2007). Quality and Reliability Assurance During the Production Phase (Basic Considerations). In: Reliability Engineering. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-49390-7_8
Download citation
DOI: https://doi.org/10.1007/978-3-540-49390-7_8
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-49388-4
Online ISBN: 978-3-540-49390-7
eBook Packages: EngineeringEngineering (R0)