Abstract
This paper presents the application of the new Image-Based Inertial Impact (IBII) test methodology to study the high strain rate response of adhesives. It relies on an inertial impact (spalling-like) test configuration and the use of ultra-high speed imaging to record the deformation of the test specimen in the MHz range. The underlying novelty is to use the acceleration obtained from the time-resolved displacement maps to derive stress information leading to the identification of the material constitutive parameters. Here, an epoxy adhesive is tested at strain rates up to 1000 s−1 and its modulus and tensile strength are successfully derived from just the deformed images.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Neumayer, J., et al.: Experimental determination of the tensile and shear behaviour of adhesives under impact loading. J. Adhes. 92(7–9), 503–516 (2016)
Yokoyama, T., Nakai, K.: Determination of the impact tensile strength of structural adhesive butt joints with a modified split Hopkinson pressure bar. Int. J. Adhes. Adhes. 56, 13–23 (2015)
Goglio, L., et al.: High strain-rate compression and tension behaviour of an epoxy bi-component adhesive. Int. J. Adhes. Adhes. 28(7), 329–339 (2008)
Pierron, F., Zhu, H., Siviour, C.: Beyond Hopkinson’s bar. Philosophical Transactions of the Royal Society A: Mathematical. Phys. Eng. Sci. 372(2023), 20130195 (2014)
Piro, J.L., Grediac, M.: Producing and transferring low-spatial-frequency grids for measuring displacement fields with moire and grid methods. Exp. Tech. 28(4), 23–26 (2004)
Grédiac, M., Sur, F., Blaysat, B.: The grid method for in-plane displacement and strain measurement: a review and analysis. Strain. 52(3), 205–243 (2016)
Seghir, R., Pierron, F.: A novel image-based ultrasonic test to map material mechanical properties at high strain-rates. Exp. Mech. 58(2), 183–206 (2018)
Pierron, F., Grédiac, M.: The virtual fields method. In: Extracting Constitutive Mechanical Parameters from Full-Field Deformation Measurements, p. 517. Springer, New York (2012)
Rossi, M., et al.: Effect of DIC spatial resolution, noise and interpolation error on identification results with the VFM. Strain. 51(3), 206–222 (2015)
Rossi, M., Pierron, F.: On the use of simulated experiments in designing tests for material characterization from full-field measurements. Int. J. Solids Struct. 49(3–4), 420–435 (2012)
Bouda, P., et al.: Optimization of an image-based experimental setup for the dynamic behaviour characterization of materials. In: Annual SEM Conference. Springer, Greenville (2018)
Acknowledgments
The authors gratefully acknowledge funding from EPSRC, grant EP/L026910/1.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 The Society for Experimental Mechanics, Inc.
About this paper
Cite this paper
Guigue, A., Fletcher, L., Seghir, R., Pierron, F. (2019). IBII Test for High Strain Rate Tensile Testing of Adhesives. In: Kimberley, J., Lamberson, L., Mates, S. (eds) Dynamic Behavior of Materials, Volume 1. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham. https://doi.org/10.1007/978-3-319-95089-1_55
Download citation
DOI: https://doi.org/10.1007/978-3-319-95089-1_55
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-95088-4
Online ISBN: 978-3-319-95089-1
eBook Packages: EngineeringEngineering (R0)