Abstract
The paper considers approximated rod-toothed gears with parallel and intersecting orthogonal operating axes. Results of mathematical simulation show that even significant errors in manufacture and assembly cause the variation of the transmission function which is one order less than its nominal value.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Medvedev, V.I.: Calculation of settings for gear-machining tools to produce bevel pairs with circular teeth. In: The 3rd International Congress “KTI-96”, Moscow (1996) (in Russian)
Pavlov, A.M.: Method of auxiliary generating surfaces and contact localization in a bevel gear pair. Gearing Transmissions. 1, 42–45 (1991) (in Russian)
Segal, M.G.: To definition of boundaries of the bearing contact for teeth of bevel and hypoid gears. Mashinovedeniye 4, 61–68 (1971) (in Russian)
Segal, M.G.: Types of localized contact in bevel and hypoid gears. Mashinovedeniye 1, 56–63 (1970) (in Russian)
Dorofeev, V.L., Golovanov, V.V., Gukasyan, S.G.: Modification of aviation gears to decrease the wear of contact surfaces. Advanced mechanical engineering. Science and education 4, 173–183 (2014) (in Russian)
Sheveleva, G.I.: Meshing of approximated bevel gearwheels. In: Theory of Gears in Machines, M., Mashgiz, pp. 38–48 (1966) (in Russian)
Lifits, I.M.: Fundamentals of Standardization, Metrology and Certification. Moscow, Yurait, p 345 (2005) (in Russian)
Morozov, I.M., Shamin, V.Y.: Fundamentals of assembly technique in mechanical engineering. Study guide, Chelyabinsk, YuUrGU (2006) (in Russian)
Patent RU 146159. MPK F16H 55/10 F15H 55/17. Wheel for the transmission of rotary motion. N 2014120175/11; appl. 19.05.2014; publ. 10.10.2014, Bul. N 28 (in Russian)
Timofeev, B.P., Sachkov, M.Y.: Synthesis of rod toothed gears according to the absence of edge contact. Theory Mech. Mach. 2(26, 13), 23–32 (2015) (in Russian)
Timofeev, B.P., Sachkov, M.Y.: Prototyping of a rod toothed gear. J. Automobile Eng. 2(91), 32–33 (2015) (in Russian)
Litvin, F.L., Fuentes A. Gear Geometry and Applied Theory, 2nd edn. Cambridge University Press, p. 800 (2004)
Litvin, F.L.: Development of Mechanisms and Parts of Devices. L. Mashinostroeniye (1973) (in Russian)
Acknowledgements
The authors wish to acknowledge the support received from the Federal Program «U.M.N.I.К.». This investigation was also supported by a grant from Saint-Petersburg in the sphere of scientific and technical activity KNVSh#165 “Analysis of the influence of manufacture and assembly errors on motion parameters of rod toothed gears with intersecting orthogonal axes”.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Timofeev, B., Sachkov, M. (2018). Approximated Rod-Toothed Gears. In: Goldfarb, V., Trubachev, E., Barmina, N. (eds) Advanced Gear Engineering. Mechanisms and Machine Science, vol 51. Springer, Cham. https://doi.org/10.1007/978-3-319-60399-5_20
Download citation
DOI: https://doi.org/10.1007/978-3-319-60399-5_20
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-60398-8
Online ISBN: 978-3-319-60399-5
eBook Packages: EngineeringEngineering (R0)