Abstract
Nowadays notorious technological growth is encouraging research natural materials in substitution to more usual synthetic ones. One of those initiatives is the vegetable fibers that have been studied for the replacement of glass and carbon fibers. This research addresses broadly the study of the natural fibers mechanics properties, but none study have been made with natural fabrics, such as the pure jute fabric used in Brazil to make ropes and carpets. This work aim to evaluate the mechanical behavior of jute fabric strips with different dimensions to be used as reinforcement into polymeric composites Lots of those fabric strips were subjected to tensile tests in order to obtain the tensile resistance for each strip size. The results obtained during the tests were satisfactory and indicated that 160 × 160 × 1 mm correspond to the best result and the perfect fabric strip for the composite reinforcement.
References
Weart SR (2003) The discovery of global warming. Harvard University Press, Boston
Houghton JT, (2004) Global warming—the complete briefing 3rd edn. Cambridge University Press, Cambridge
Gore, A (2006) An inconvenient truth. In: The planetary emergency of global warming and what we can do about it. Rodale Press, Emmaus
Satyanarayana KG, Guimarães JL, Wypych F (2007) Studies on lignocellulosic fibers of Brazil. Part I: source, production, morphology, properties and applications. Compos A 38:1694–1709
Bledzki AK, Gassan J (1999) Composites reinforced with cellulose-based fibers. Prog Polym Sci 4:221–274
Nabi Sahed D, Jog JP (1999) Natural fiber polymer composites: a review. Adv Polym Technol 18:221–274
Mohanty AK, Misra M, Hinrichsen G (2000) Biofibers, biodegradable polymers and biocomposites: an overview. Macormol Mat Eng 276(277):1–24
Kumar AP, Singh RP, Sarwade BD (2005) Degradability of composites prepared from ethylene-propylene copolymer and jute fiber under accelerated aging and biotic environments. Mat Chem Phy 92:458–469
Doan T-T-L, Gao S-L, Mäder E (2006) Jute/polypropylene composites I. Effect of matrix modification. Compos Sci Technol 66:952–963
Monteiro SN, Terrones LAH, Lima AC, Petrucci LJT, d’Almeida JRM (2006) Properties of recycled polyethylene composites reinforced with discarded jute sackcloth (in Portuguese). Rev Mater 11(4):403–411
Monteiro SN, Lima AC, Terrones LAH, d’Almeida JRM (2007) Fabric rupture mechanism of jute sackcloth used as reinforcement in polyethylene composites. In: Proceedings of characterization of minerals, metals and materials—TMS Conference, Orlando, FL, USA, February, 2007, p 1
Monteiro SN, Lima AC, Terrones LAH, d’Almeida JRM (2008) Recycled polyethylene composites reinforced with jute fabric from post–used sackcloth: an environmentally correct building material. In: Proceedings of the REWAS 2008, Cancun, Mexico, October, 2008, pp 1–6
Fu SY, Lauke B, Mäder E, Hu X, Yue CY (1999) Fracture resistance of short-glass-fiber-reinforced and short-carbon-fiber-reinforced poly-propylene under charpy impact load and dependence on processing. J Mater Process Technol 89(90):501–507
Leão AL, Tan IH, Caraschi JC (1998) Curaua fiber—a tropical natural fibr from Amazon—potential and applications in composites, In: Proceedings of the international conference on advanced composites, Hurghada, Egypt, May, 1998, pp 557–564
Monteiro SN, Aquino RCMP, Lopes FPD, Carvalho EA, d’Almeida JRM (2006) Charpy impact notch toughness of piassava fibers reinforced polyester matrix composites (in Portuguese). Rev Mater 11(3):204–210
Yue CY, Looi HC, Quek MY (1995) Assessment of fibre-matrix adhesion and interfacial properties using the pullout test. Int J Adhes Adhes 15:73–80
Monteiro SN, Costa LL, Lopes FDP, Terrones LAH (2008) Characterization of the impact resistance of coir fiber reinforced polyester composites. In: Proceedings of the TMS conference, New Orleans, LA, USA, March, 2008 pp 1–6
Acknowledgements
The authors thank the support to this investigation by the Brazilian agencies: CNPq, CAPES, FAPERJ and TECNORTE/FENORTE. It is also acknowledged the Redentor Faculty Research Committee for the aid in scientific projects and the UFRJ for the permission to the use of the impact equipment of IQ/UFRJ and the SEM microscope by the PEMM from COPPE/UFRJ.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 The Minerals, Metals & Materials Society
About this paper
Cite this paper
Monteiro, S.N., Margem, F.M., Daniel, G.F., Barbosa, V.O., Gomes, A.R., de Souza, V.B. (2017). The Dimensional Characterization of Jute Fabric Strips for Reinforcement in Composite Polymeric. In: Ikhmayies, S., et al. Characterization of Minerals, Metals, and Materials 2017. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-319-51382-9_5
Download citation
DOI: https://doi.org/10.1007/978-3-319-51382-9_5
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-51381-2
Online ISBN: 978-3-319-51382-9
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)