Abstract
Grain size is a key property that is carefully controlled during processing to create specific mechanical properties and reliability in final components. Achieving specific grain sizes is especially important in aircraft engines where temperatures can range from 260°C at the bore to 704°C at the rim, creating fatigue cracking in the bore and creep damage in the rim region. These competing failure mechanisms led to nickel alloy disks possessing fine-grains, ~5 microns in the bore and coarse-grains, ~80 micron in the rim. We created an automated ultrasonic measurement tool which calculates grain size from ultrasonic backscattering measurement. The tool unifies the entire process including controlling the ultrasonic scanner, data acquisition, experimental and theoretical backscattering calculations, numerical optimization to obtain grain size, and visualization. We tested our tool on IN718, Waspaloy, Rene 88 and Alloy 10. Our automated “Ultrasonic Metallography Tool” produced a map of the grain size where the color scale is the grain size. The authors believe this is the first time such a map has been generated automatically from ultrasonic backscattering measurements. Our results compare favorably with traditional metallography agreeing to within 2 microns for some alloys.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Shenoy, M.; Zhang, J.; McDowell, D.L. “Estimating fatigue sensitivity to polycrystalline Ni-base suberalloy micro structure s using a computational approach”, Fatigue & Fracture of Engineering Materials & Structures, Volume 30, Number 10, October 2007 , pp. 889–904(16)
Tamirisakandala, Seshacharyulu; Bhat, Radhakrishna B.; Tiley, Jaimie S.; Miracle, Daniel B., “Processing, Microstructure, and Properties of ß Titanium Alloys Modified With Boron”, J. of Materials Engineering and Performance, Volume 14, Number 6, December 2005 , pp. 741–746(6)
P.R. Onck and E. van der Giessen, “Numerical simulation of grain-size effects on creep crack growth by means of grain elements” 2nd European Mechanics of Materials Conference on Mechanics of Materials with Intrinsic Length Scale : Physics, Experiments, Modeling and Applications, J. Phys. IV France 08 (1998) Pr8–285-Pr8–292
Swami Ganesh, Ronald G. Tolbert, “Differentially heat treated article and apparatus and process for the manufacture thereof”, US Patent 5,527,020, June 18, 1996
Gayda, J., Gabb, T.P., and Kantzos, P., “The Effect of Dual Microstructure Heat Treatment on an Advanced Nickel-Base Disk Alloy,” suberalloys 2004, Edited by K. A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, TMS (The Minerals, Metals, & Materials Society), pp. 323–329, 2004.
Heffernan, T.M., “Spin Testing of suberalloy Disks With Dual Grain Structure,” NASA/CR 2006–214338, EDR-90712, NASA Glenn Research Center, Cleveland OH, May 2006.
Gerald F. Mathey, “Method of making suberalloy turbine disks having graded coarse and fine grains,” US Patent # 5312497, May 1994.
Paul D. Panetta, Leslie Bland, and Maureen Tracy, “Ultrasonic Characterization of Blisk and Disk Gradient Micro structures to Improve Fatigue life and Creep Resistance”, Report to the FAA, 2012
Lester Schmerr, “Fundamentals of Ultrasonic Nondestructive Evaluation: A Modeling Approach”, 1998, Plenum Press.
R. B. Thompson and T. A. Gray, J. Acoust. Soc. Am., Vol. 74, (1983), pp. 140–146
F. J. Margetan, R.B. Thompson, I. Yalda-Mooshabad, and Y.K. Han, “Detectability of Small Flaws in Advanced Engine Alloys,” U.S. Air Force Technical Report, Center for NDE, Iowa State University, 1993.
Rose, James H.“Ultrasonic backscatter from microstructure”, Review of progress in quantitative nondestructive evaluation. Vol. IIB; 1992, p. 1677–1684.
Author information
Authors and Affiliations
Editor information
Rights and permissions
Copyright information
© 2014 TMS (The Minerals, Metals & Materials Society)
About this paper
Cite this paper
Panetta, P.D., Bland, L.G., Tracy, M., Hassan, W. (2014). Ultrasonic Backscattering Measurements of Grain Size in Metal Alloys. In: TMS 2014: 143rd Annual Meeting & Exhibition. Springer, Cham. https://doi.org/10.1007/978-3-319-48237-8_86
Download citation
DOI: https://doi.org/10.1007/978-3-319-48237-8_86
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-48593-5
Online ISBN: 978-3-319-48237-8
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)