Abstract
The precipitation behavior of dispersoids in DC cast AA3103 alloy during heating and homogenization at 600°C has been studied by means of TEM, electrical conductivity measurement and image analysis. During heating, α-Al(Mn,Fe)Si is the first phase to precipitate in the alloy. When heated to higher temperature, long rod like and plate like Al6(Mn,Fe) dispersoids precipitate in the alloy. During homogenization, the size of Al6(Mn,Fe) dispersoids grows while a-Al(Mn,Fe)Si dispersoids dissolve quickly. The evolution of dispersoids during heat treatment is mainly controlled by nucleation, coarsening and dissolution. The size, and number density of dispersoids have been measured. The volume fraction of dispersoids formed during heating, measured from TEM images, has the same trend as the volume fraction calculated from the electrical conductivity of the alloy.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
E. Nes, “The Effect of a Fine Particle Dispersion on Heterogeneous Recrystallization”, Acta Metallurgica. 24 (1976), 391.
F. J. Humphreys, “The Nucleation of Recrystallization at Second Phase Particles in Deformed Aluminium”, Acta Metallurgica, 25 (1977), 1323–1344.
Y. Kwagand J. G.Morris, “The effect of structure on the Mechanical Behavior and Stretch Formability of Constitutionally Dynamic 3000 Serires Aluminum Alloys”, Materials Science and Engineering, 77 (1986), 59–74.
E. Nes, S.E. Naessand R. Hoier, “Decomposition of an Aluminium-Manganese Alloy”, Z. Metallkde., 63 (1972), 248–253.
P. Furrer, “Gemgeaanderungen bei der Warmebehandlung von Al-Mn-Stranggupbarren”, Z. Metallkde, 70 (11) (1979), 699–706.
D.B. Goel, P. Furrer, and H. Warlimont, “Ausscheidungsverhalten von Aluminium- Mangan-(-Kupfer,-Eiesen-) Legierungen”, Aluminium, 8 (1974), 511–516.
V. Hansen, J. Gjønnes, and B. Andersson, “Quasicrystal as Part of the Precipitation Sequence in an Industrious Cast Aluminium Alloy”, J. Mater. Sci. Lett., 8 (1989), 823 – 826.
P.C.M. Haan, J.V. Rgkom, J. A. H. Semtgerath, “The precipitation Behaviour of High-Purity Al-Mn Alloys”, Materials Sciece Forum, vols. 217–222 (1996), 765–770
G. Hausch, P. Furrer, and H. Warlimont, “Crystallisation and Precipitation in Al-Mn-Si alloys”, Z. Metallkde, 69 (1978), 174.
P. Kolby, C Sigli, and C.J. Simensen, “Solubility Limit of Mn and Si in Al-MnSi at 550°C”, Proceedings of the 4th International Conference on Aluminium alloys: their Physical and Mechanical Properties, ed. L. Arnberg, et al. (Trondheim, 1994), 508–512.
Y.J. Liand L. Arnberg, “Quantitative Study on the Precipitation of Dispersoids in DC-Cast 3003 Alloy During Heating and Homogenization”, submitted to Acta. Mater., 2002
D. Altenpohl, Aluminium und Aluminiumlegerungen, (Berlin: Springer Verlag, 1965), 526.
E. Trømborg, et al., “Computer modelling as a Tool for Understanding the Precipitation of Mn in AA3xxx Alloys”, The 6th Conference on Modeling of Casting, Welding and Advanced Solidification Processes, ed. T.S Piwonka, V. Voller and L. Katgerman, (TMS, 1993), 101.
Y.J. Liand L. Arnberg, “Precipitation of Dispersoids in DC-Cast AA3003 Alloy” Mater. Sci. Forum, 396–402(2002), 875–880.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 The Minerals, Metals & Materials Society
About this chapter
Cite this chapter
Li, Y., Arnberg, L. (2016). Precipitation of Dispersoids in DC-Cast AA3103 Alloy during Heat Treatment. In: Grandfield, J.F., Eskin, D.G. (eds) Essential Readings in Light Metals. Springer, Cham. https://doi.org/10.1007/978-3-319-48228-6_129
Download citation
DOI: https://doi.org/10.1007/978-3-319-48228-6_129
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-48576-8
Online ISBN: 978-3-319-48228-6
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)