Abstract
The anodic overvoltage in aluminum electrolysis represents 10 – 15% of the total cell voltage, and possible means of reducing the overvoltage should then be studied. In the present work the anodic overvoltage was measured in two prebake cells, 180 kA and 235 kA, the latter having some anodes with slots, and in one 145 kA HSS cell. A special reference electrode was used. At normal current densities the overvoltage varied from 0.72 V at 5 wt% Al2O3 to 0.86 V at 2 wt%. At comparable anodic current densities and alumina concentrations, the overvoltage for the anodes with one transverse 1.5 cm groove were 0.11 V less than for the conventional anodes. For the HSS cell the overvoltage was similar.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
M.W. Chase et al.,JANAF Thermochemical Data, 3nd ed.Nat. Bureau of Standards, Washington, 1975.
J.S. Berry and N. E. Richards, “Selected Properties of the San Patricio Cell”, Reynolds Metals Report, Apr. 25, 1966.
J. Thonstad, A. Solbu and A. Larsen, “The decomposition voltage of aluminium reduction cells. The influence of the alumina content in the bath”, J. Appl. Electrochem. 1, 261–268 (1971).
K. Grjotheim, C. Krohn, M. Malinovsky, K. Matiasovsky and J. Thonstad, “Aluminium Electrolysis. Fundamentals of the Hall-Heroult Process”, 2nd ed., Aluminium-Verlag, Dusseldorf, 1982.
J. Thonstad, P. Fellner, G.M. Haarberg, J. Hives, H. Kvande and Å. Sterten, “Aluminium Electrolysis. Fundamentals of the Hall-Heroult Process”, 3rd ed., Aluminium-Verlag, Dusseldorf, 2001.
Kisza, J. Kazmierczak, J. Thonstad, T. Eidet and J. Hives, “The Kinetics and Mechanism of the Electrode Reactions in Aluminium Electrolysis”, Light Metals 1999, 423–429.
M.P. Taylor, B.J. Welch and M.S. Sullivan, Chemeca 83, Proc. 11th Australasian Chem. Eng. Conf, Brisbane, 1985, 437.
J. Zoric, J. Thonstad and T. Haarberg, “The influence of current distribution by the initial shape and position of an anode and by the curvature of the aluminium in prebake aluminium cells”, Light Metals 1998, 445–453.
B.P. Moxnes, B.E. Aga and J.H. Skaar, “How to Obtain Open Feeder Holes by Installing Anodes with Tracks”, Light Metals 1998, 247–255.
G.P. Tarcy, Sverre Rolseth and Jomar Thonstad, “Systematic Alumina Measurement Errors and their Significance in the Liquidus Enigma”, Light Metals 1993, s.227–232.
P. Verstreken, S. Benninghoff, “Bath and liquidus temperature sensor for molten salts”, Light Metals 1996, 437–444.
S. Rolseth, P. Verstreken, and O. Kobbeltvedt, “Liquidus temperature determination in molten salts”, Light Metals 1998, 359–366.
E. Skybakmoen, A. Solheim and A. Sterten, “Phase Diagram Data in the System Na3AlF6 —Li3AlF6 — A1F3 — A12O3. Part 1”, Light Metals 1990,317–324.
B.J. Welch and N.E. Richards, Extraction Metallurgy of Aluminum, Vol. 2, Interscience, New York, 1963, 15–30.
N. E. Richards, “The Dynamics of Components of the Anodic Overvoltage in the Alumina Reduction Cell”, Light Metals, 1998, 521–529.
N.E. Richards and J.S. Berry, “Observations of Frequencies in anodic Currents”, Reynolds Metals Company Report, Apr. 27, 1972.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 The Minerals, Metals & Materials Society
About this chapter
Cite this chapter
Gudbrandsen, H., Richards, N., Rolseth, S., Thonstad, J. (2016). Field Study of the Anodic Overvoltage in Prebaked Anode Cells. In: Bearne, G., Dupuis, M., Tarcy, G. (eds) Essential Readings in Light Metals. Springer, Cham. https://doi.org/10.1007/978-3-319-48156-2_23
Download citation
DOI: https://doi.org/10.1007/978-3-319-48156-2_23
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-48155-5
Online ISBN: 978-3-319-48156-2
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)