Abstract
Seawater reverse osmosis desalination systems produce brine (concentrate) that normally must be discharged back to the sea. The concentrate can have up to twice the salinity of the feedwater and can cause environmental impacts to the marine environment. Innovation in the design and evaluation of diffuser systems has led to reductions in potential environmental impacts by causing rapid dispersion of the high salinity plume. The nearfield and farfield models used to assess potential environmental impacts of the dense water discharge have also been improved to allow assessment of impacts and to make design changes that lessen them. The selection of discharge sites has been improved by the ability of obtaining rapid and accurate bathymetric and water quality data that can be used in models to assess circulation and other aspects of outfall design and to monitor and assess potential discharge impacts.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Chao, Y., Li, Z. J., Farrara, J., McWilliams, J. C., Bellingham, J., et al. (2009). Development, implementation and evaluation of a data-assimilative ocean forecasting system off the central California coast. Deep-Sea Research Part II: Topical Studies in Oceanography, 56, 100–126.
Hoteit, I., Pham, D. T., Triantafyllou, G., & Korres, G. (2008). A new approximate solution of the optimal nonlinear filter for data assimilation in meteorology and oceanography. Monthly Weather Review, 136, 317–334.
Korres, G., Triantafyllou, G., Petihakis, G., Raitsos, D. E., Hoteit, I., et al. (2012). A data assimilation tool for the Pagasitikos Gulf ecosystem dynamics: Methods and benefits. Journal of Marine Systems, 94, S102–S117.
Lattemann, S., & Höpner, T. (2008). Environmental impact and impact assessment of seawater desalination. Desalination, 220, 1–15.
Natural Solutions and SKM. (2006). Baseline water quality and marine ecology monitoring program.
Natural Solutions. (2006). Environmental impact assessment for the gold coast desalination project.
Percly, J. O. G., & Roldao, J. S. F. (2013). Dye tracers as a tool for outfall studies: Dilution measurement approach. Water Science and Technology, 67, 1564–1573.
Petrenko, A. A., Jones, B. H., Dickey, T. D., LeHaitre, M., & Moore, C. (1997). Effects of a sewage plume on the biology, optical characteristics, and particle size distributions of coastal waters. Journal of Geophysical Research-Oceans, 102, 25061–25071.
Rogowski, P., Terrill, E., Otero, M., Hazard, L., & Middleton, W. (2013). Ocean outfall plume characterization using an autonomous underwater vehicle. Water Science and Technology, 67, 925–933.
Uchiyama, Y., Idica, E. Y., McWilliams, J. C., & Stolzenbach, K. D. (2014). Wastewater effluent dispersal in Southern California bays. Continental Shelf Research, 76, 36–52.
van der Merwe, R., Bleninger, T., Acevedo-Feliz, D., Latteman, S., & Amy, G. (2014). In-situ monitoring and assessment of SWRO concentrate discharge. Journal of Applied Water Engineering and Research (in press).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this paper
Cite this paper
Jones, B. (2015). Innovations in Design and Monitoring of Desalination Discharges. In: Missimer, T., Jones, B., Maliva, R. (eds) Intakes and Outfalls for Seawater Reverse-Osmosis Desalination Facilities. Environmental Science and Engineering(). Springer, Cham. https://doi.org/10.1007/978-3-319-13203-7_23
Download citation
DOI: https://doi.org/10.1007/978-3-319-13203-7_23
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-13202-0
Online ISBN: 978-3-319-13203-7
eBook Packages: EngineeringEngineering (R0)