Abstract
New hydraulic piping was built in the laboratory of applied mechanics. The arrangement of hydraulic circuits and new concept operator’s station required a change of the control system for hydraulic power units. Ensuring of operational safety was the main criterion in the new design of the control system. Power units can not be started when their parameters are set incorrectly and they will be automatically stopped when limit values are exceeded. All status information is displayed on the operator’s screen and from this station all power units can be controlled by software applications.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ďad’o S, Kreidel M (1996) Senzory a měřicà obvody, ČVUT Praha
Electronical components datasheets (2013) http://www.alldatasheet.com/datasheet-pdf/pdf/8172/NSC/CD4001.html
LabVIEW 7 (2003) Express user manual, National Instruments Corporation
Krátký M (2012) Hydraulic systems technical documentation, Inova Praha s.r.o
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer International Publishing Switzerland
About this paper
Cite this paper
Lufinka, A. (2014). Innovation of the Control System for Hydraulic Power Units. In: Å evĉik, L., LepÅ¡Ãk, P., Petrů, M., MaÅ¡Ãn, I., Martonka, R. (eds) Modern Methods of Construction Design. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-05203-8_64
Download citation
DOI: https://doi.org/10.1007/978-3-319-05203-8_64
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-05202-1
Online ISBN: 978-3-319-05203-8
eBook Packages: EngineeringEngineering (R0)