Abstract
This report summarizes development of test rig for gearboxes of rail vehicles. Tested gearbox will be simultaneously dynamically loaded in two modes. First is impact load in 3 main directions that simulates shocks transferred from wheels into gearbox. The other one is standard torque load. Structure for impact load is hexapod compounded of 6 hydraulic cylinders connected to a frame that holds tested gearbox. Part of development was also design of frames for electric motors.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Reference
Dynybyl V (2009) VĂœkonovĂĄ metrologie: experimentĂĄlnĂ podpora vĂœvoje a inovacĂ mechanismĆŻ ve strojĂrenstvĂ, Vyd. 1. ÄeskĂ© vysokĂ© uÄenĂ technickĂ© v Praze, Praha, 152s. ISBN 978-80-01-04325-7
Acknowledgments
The research work reported here was made possible by Ministry of Industry and Trade of the Czech Republic grant No. FR-TI3/261.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer International Publishing Switzerland
About this paper
Cite this paper
Petr, K., Dynybyl, V., ChmelaĆ, J. (2014). Test Rig for Gearboxes of Rail Vehicles. In: Ć evÄik, L., LepĆĄĂk, P., PetrĆŻ, M., MaĆĄĂn, I., Martonka, R. (eds) Modern Methods of Construction Design. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-05203-8_24
Download citation
DOI: https://doi.org/10.1007/978-3-319-05203-8_24
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-05202-1
Online ISBN: 978-3-319-05203-8
eBook Packages: EngineeringEngineering (R0)