Abstract
In order to accurately detect the grouting defects of construction sleeves, a method for identifying the grouting defects of prefabricated construction sleeves based on computer vision is proposed. The 3D target detection algorithm is used for feature point detection, and the corner detection model of assembled building is constructed to obtain the feature angle detection results and match the feature angles. The constraint relationship is extracted from the data in the image sequence of the grouting defects of the prefabricated construction sleeve, and the parameters of the filling defects of the construction sleeve are calibrated. Finally, the defect identification is completed through the sleeve grouting scanning of computer vision. The experimental results show that the method based on computer vision to identify the grouting defects of prefabricated construction sleeve has strong recognition ability and can well complete the defect identification.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Dan, D., Dan, Q.: Automatic recognition of surface cracks in bridges based on 2D-APES and mobile machine vision. Measurement 168(6), 108429 (2021)
Lin, Z., Lai, Y., Pan, T., et al.: A new method for automatic detection of defects in selective laser melting based on machine vision. Materials 14(15), 4175 (2021)
Wang, S., Wang, C., Li, W., et al.: Study on the operational efficiency of prefabricated building industry bases in Western China based on the DEA model. Arab. J. Geosci. 14(6), 446 (2021)
Zhao, Y., Chen, D.: A facial expression recognition method using improved capsule network model. Sci. Program. 2020(2), 1–12 (2020)
Zhang, X., Gong, W., Xu, X.: Magnetic ring multi-defect stereo detection system based on multi-camera vision technology. Sensors 20(2), 392 (2020)
Xu, W.: Simulation Study on stability evaluation of spatial structure of building interior environment. Comput. Simulat. 37(02), 455–458+462 (2020)
Wen, Y., Fu, K., Li, Y., et al.: A sliding window method to identify defects in 3D printing lattice structure based on the difference principle. Meas. Sci. Technol. 32(6), 65–78 (2021)
Yi, M., Deyuan, Z., Xuan, Z., et al.: Research on defect detection of sleeve grouting in a precast column based on bp neural network. Structural Engineers 38(03), 24–32 (2022)
Sun, H., Gao, Y., Zheng, X., et al.: Failure mechanism of precast defective concrete based on image statistics. J. Build. Mater. 24(06), 1154–1162 (2021)
Du, Y., Du, J.: Research on recognition of sleeve grouting quality defects based on piezoelectric wave method. Build. Struct. 51(09), 49–55 (2021)
Wang, J., Xiao, Q., Shen, Q., et al.: Analysis on the axial behavior of cfrp wrapped circular cfst stub columns with initial concrete imperfection. Prog. Steel Build. Struct. 23(06), 44–53+70 (2021)
Yang, C., Shi, C., Su, S., et al.: Detection and analysis of grouting compactness based on frequency spectrum analysis and wavelet packet entropy technology. Build. Struct. 51(16), 110–115 (2021)
Jiang, M., Wei, X., Sun, Z., et al.: Study on non-destructive testing methods for composite slabs and wall panels in precast concrete structure. Build. Struct. 52(S1), 2144–2149 (2022)
Xiao, S., Li, X., Xu, Q.: Research progress of quality detection and defect repair for sleeve grouting in assembled monolithic concrete structure. Build. Struct. 51(05), 104–116 (2021)
Zhao, J., Yajing, Shang, J., et al.: Comprehensive analysis and judgment of hole defects in steel plate shear wall with ultrasonic testing. Build. Struct. 52(03), 94–98 (2022)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 ICST Institute for Computer Sciences, Social Informatics and Telecommunications Engineering
About this paper
Cite this paper
Wang, S., Wu, L. (2024). Computer Vision Based Method for Identifying Grouting Defects of Prefabricated Building Sleeves. In: Wang, B., Hu, Z., Jiang, X., Zhang, YD. (eds) Multimedia Technology and Enhanced Learning. ICMTEL 2023. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, vol 533. Springer, Cham. https://doi.org/10.1007/978-3-031-50574-4_9
Download citation
DOI: https://doi.org/10.1007/978-3-031-50574-4_9
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-50573-7
Online ISBN: 978-3-031-50574-4
eBook Packages: Computer ScienceComputer Science (R0)