Abstract
The stability of building load-bearing structure is closely related to the building life. Unstable building load-bearing structure has a great potential safety hazard. The stability detection method of building load-bearing structure based on BIM and computer vision is designed. The computer vision system for image acquisition of building load-bearing structural components is designed, which is composed of CCD camera, image acquisition card, light source and UAV. The secondary development technology of Revit is applied to establish the overall structural information model, and the influencing factors of structural stability are introduced into the information model. Build a stability detection network model based on YOLOv4 network architecture, and implement the stability detection of building load-bearing structures. The test results show that the accuracy rate of the design method is higher than 0.920, the recall rate is higher than 97%, and the test time for new and old buildings is 106.85 min and 75.41 min respectively under different confidence levels.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Sgobba, S., Santillana, I.A., Arnau, G., et al.: Examination and assessment of large forged structural components for the precompression structure of the ITER central solenoid[J]. IEEE Trans. Appl. Supercond. Supercond. 30(9), 1–4 (2020)
Guo, W., Yang, W., Ma, Z., et al.: Stability criterion of overburden structure above goaf under buildingload and its application[J]. J. China Coal Soc. 47(6), 2207–2217 (2022)
He, X., Qiu, F., Cheng, X. et al.: High-resolution image building target detection based on edge feature fusion. Comput. Sci. 48(9), 140–145 (2021)
Zhao, R., Wang, J., Lin, S.: Small building detection algorithm based on convolutional neural network. Syst. Eng. Electron. 43(11), 3098–3106 (2021)
Wang, Y., Zhang, Z.: Design of overall stability analysis system for GSCAD building using BIM. Tech. Autom. Appl.Autom. Appl. 41(11), 175–179 (2022)
Lan, Q., Zhang, X., Li, Y., et al.: Output feedback disturbance rejection control for building structure systems subject seismic excitations. Measure. Contr. 53(10), 1616–1624 (2020)
Di, W., Zhe, Z.: Simulation of building space dimension deviation identification based on grid multi density. Comput. Simul. 39(2), 447–451 (2022)
Li, Y., Yue, X., Zhao, L., et al.: Effect of north wall internal surface structure on heat storage-release performance and thermal environment of Chinese solar greenhouse. J. Building Phys. 45(4), 507–527 (2022)
Gu, Y., Li, P., Meng, X., et al.: Re-measurement and stability analysis of super-large structure plane control network. Architect. Technol. 53(7), 847–850 (2022)
Martinez, J., Albeaino, G., Gheisari, M., et al.: UAS point cloud accuracy assessment using structure from motion-based photogrammetry and PPK georeferencing technique for building surveying applications. J. Comput. Civ. Eng.Comput. Civ. Eng. 35(1), 1–15 (2021)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 ICST Institute for Computer Sciences, Social Informatics and Telecommunications Engineering
About this paper
Cite this paper
Wu, L., Wang, S. (2024). Stability Detection of Building Bearing Structure Based on Bim and Computer Vision. In: Wang, B., Hu, Z., Jiang, X., Zhang, YD. (eds) Multimedia Technology and Enhanced Learning. ICMTEL 2023. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, vol 533. Springer, Cham. https://doi.org/10.1007/978-3-031-50574-4_10
Download citation
DOI: https://doi.org/10.1007/978-3-031-50574-4_10
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-50573-7
Online ISBN: 978-3-031-50574-4
eBook Packages: Computer ScienceComputer Science (R0)