Abstract
The goal of this study is to find the best main design parameters of a two-stage helical gearbox in order to achieve the lowest gearbox mass. The gear ratio of the first stage, the coefficient of wheel face width of stages 1 and 2, and the allowable contact stress of stages 1 and 2 were all taken into account in this work to determine their optimum values. To achieve the goal, a simulation experiment was designed and implemented by a computer program. The Minitab R19 software was also used to analyze the experimental results. The impact of key design factors on gearbox mass was assessed. The best values for these parameters were also proposed.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Maputi, E.S., Arora, R.: Design optimization of a gearbox: problem formulation procedure. In: 2018 International Conference on Automation and Computational Engineering (ICACE). IEEE (2018)
Golabi, S.I., Fesharaki, J.J., Yazdipoor, M.: Gear train optimization based on minimum volume/weight design. Mech. Mach. Theory 73, 197–217 (2014)
Eremeev, P., et al.: Optimization of a gearbox taking into account dynamic performance and assimilability. In: Proceeding of ISMA2020 including USD2020, pp. 2753–2762 (2020)
Korka, Z.I., Cojocaru, V., Miclosina, C.-O.: Modal-based design optimization of a gearbox housing. Rom. J. Acoust. Vib. 16(1), 58–65 (2019)
Patil, M., Ramkumar, P., Shankar, K.:Multi-objective optimization of the two-stage helical gearbox with tribological constraints Mech. Mach. Theory 138, 38–57 (2019)
Tuan, N.K., et al.: Determining optimal gear ratios of a two-stage helical reducer for getting minimal acreage of a cross-section. In: MATEC Web of Conferences. EDP Sciences (2018)
Pi, V.N., et al.: A new study on determination of optimum gear ratios of a two-stage helical gearbox. In: Advances in Material Sciences and Engineering, pp. 107–115. Springer (2020)
Pi, V.N., Thao, T.T.P., Tuan, D.A.: Optimum determination of partial transmission ratios of mechanical driven systems using a chain drive and two-step helical gearbox J. Environ. Sci. Eng. B 6, 80 (2017)
Hung, L.X., et al.: Calculation of optimum gear ratios of mechanical driven systems using a two-stage helical gearbox with first stage double gear sets and chain drive. In: International Conference on Engineering Research and Applications. Springer (2019)
Pi, V.N., et al.: Determination of optimum gear ratios of a three-stage bevel helical gearbox. In: IOP Conference Series: Materials Science and Engineering. IOP Publishing (2019)
Thao, T.T.P., et al.: Determining optimum gear ratios of mechanical driven systems using three-stage bevel helical gearbox and chain drive. In: International Conference on Engineering Research and Applications. Springer (2019)
Tuan, N.K., et al.: Optimum calculation of partial transmission ratios of mechanical driven systems using a V-belt and a three-step bevel helical gearbox. In: International Conference on Engineering Research and Applications. Springer (2018)
Tung, L.A., et al.: A study on determination of optimum gear ratios of a two-stage worm gearbox. In: International Conference on Engineering Research and Applications. Springer (2019)
Hong, T.T., et al.: Calculation of optimum gear ratios of mechanical driven systems using worm-helical gearbox and chain drive. In: International Conference on Engineering Research and Applications. Springer (2019)
Pi, V.N., et al.: Determining optimum gear ratios of a worm—helical gearbox for minimum acreage of the cross section. In: Advances in Material Sciences and Engineering, pp. 89–96. Springer (2020)
Le Hong Ky, T.T.H., et al.: Calculation of optimum gear ratios of mechanical driven systems using worm-helical gearbox and chain drive (2020)
Pi, V.N., et al.: A study on determination of optimum gear ratios of a worm-helical gearbox. In: IOP Conference Series: Materials Science and Engineering. IOP Publishing (2019)
Cam, N.T.H., et al.: Determining optimal partial transmission ratios of mechanical driven systems using a V-belt drive and a helical reducer with second-step double gear-sets. In: International Conference on Engineering Research and Applications. Springer (2018)
Hong, T.T., et al.: A study on calculation of optimum gear ratios for three stage bevel helical gearboxes, vol. 500, p. 1 (2006)
Pi, V.N.: Optimal determination of partial transmission ratios for four-step helical gearboxes with first and third step double gear-sets for minimal mass of gears, vol. 2, p. 2 (2008)
Chat, T., Uyen Van, L.: Design and Calculation of Mechanical Transmissions Systems 1 Educational Republishing House Hanoi (2007)
Römhild, I., Linke, H.: Gezielte Auslegung Von Zahnradgetrieben mit minimaler Masse auf der Basis neuer Berechnungsverfahren. Konstruktion (1981) 44(7–8), pp. 229–236 (1992)
Acknowledgment
This work was supported by Thai Nguyen University of Technology.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Khai, D.Q. et al. (2023). Calculating Optimum Main Design Factors of a Two-Stage Helical Gearboxes for Minimum Gearbox Mass. In: Nguyen, D.C., Vu, N.P., Long, B.T., Puta, H., Sattler, KU. (eds) Advances in Engineering Research and Application. ICERA 2022. Lecture Notes in Networks and Systems, vol 602. Springer, Cham. https://doi.org/10.1007/978-3-031-22200-9_34
Download citation
DOI: https://doi.org/10.1007/978-3-031-22200-9_34
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-22199-6
Online ISBN: 978-3-031-22200-9
eBook Packages: EngineeringEngineering (R0)