Abstract
Piezoelectric energy has been paid attention to as conventional renewable energy sources including solar, wind, and geothermal power. To address the dilemma of climatic conditions affecting the energy harvesting using Lead Zirconate Titanate (PZT) in pavement, wafer-boxes were used with embedded PZT sensors, since wafer-boxes have the ability to be embedded in the pavement where sensors are protected from any kind of physical damage. This research project was designed to identify which shaped wafer-box produced the most electric voltage and power. Various forms of wafer-box were developed to identify if there was any potential difference in voltage generation due to the structural shapes of the box. Seven different shapes of prototype wafer-boxes were designed utilizing both a 3D printer and 3D Computer Aided Design (CAD). These wafer-box were coupled with embedded PZT sensors which were tested in asphalt pavement analyzer (APA) machine under certain load to produce electric voltage. Collected voltage data from the APA wheel load test were analyzed using various statistical methods. The statistical analyses results indicated that out of the seven different shaped wafer boxes, the right-angled triangular shaped box produced the highest average voltage values where’s square shaped wafer-box produced the lowest amount of voltage. Structural properties of a wafer-box in terms of section modulus, area moment of inertia, extreme points, and radius of gyration were also analyzed, and a regression analysis was conducted to identify the reasons of different amounts of voltage produced. These voltage values could be used to calculate the power using power formulas showing relationship between power and voltage values. The outcome helped to identify which shape is most effective to power generation under certain circumstances. The regression analysis results indicated that out of four properties the section modulus is the most influential structural property affecting voltage production.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Wen, S., Chung, D.D.L.: Piezoelectric cement-based materials with large coupling and voltage coefficients. Cement Concrete Res. ELSEVIER 32(3), 5 (2002)
Hu, A., Fang, Y., Young, J.F., Oh, Y.‐J.: Humidity dependence of apparent dielectric constant for DSP cement materials at high frequencies. J. American Ceramic Soc. 82(7), 8 (1999)
Kim, H.S., Kim, J.H., Kim, J.: A review of piezoelectric energy harvesting based on vibration. Int. J. Precision Eng. Manufact. 12(6), 1129-1141 (2011)
Rahman, M., et al.: 1.02 - Techniques for assessing the properties of advanced ceramic materials. In: Comprehensive Materials Processing, Hashmi, S., et al., Editors: Elsevier: Oxford, pp. 3–34 (2014)
Harnessing Pavement Power: Developing Renewable Energy Technology in the Public Right-of-Way. Federal Highway Administration, p. 2 (2013)
Xiong, H., et al.: Piezoelectric energy harvesting from traffic induced deformation of pavements. Int. J. Pavement Res. Technol. 5(5), 333–337 (2012)
Ali, S.F., Friswell, M.I., Adhikari, S.: Analysis of energy harvesters for highway bridges. J. Intell. Mater. Syst. Struct. 22(16), 1929–1938 (2011)
APC International, L. PZT Materials. PIEZO Theory 2016 07/28/2018 [cited 2018. https://www.americanpiezo.com/piezo-theory/pzt.html
Gkoumas, K., Petrini, F., Bontempi, F.: Energy harvesting for the life-cycle of structures and infrastructures: State of art, recent trends and future developments. In: Life-Cycle and Sustainability of Civil Infrastructure Systems: Proceedings of the Third International Symposium on Life-Cycle Civil Engineering (IALCCE’12), Vienna, Austria, October 3–6, 2012. CRC Press (2012)
Yu, L., et al.: In-situ health monitoring on steel bridges with dual mode piezoelectric sensors. In: Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security 2013, March 11, 2013 - March 14, 2013. SPIE, San Diego, CA, United states (2013)
Yu, L., et al.: Piezoelectric based sensing in wireless steel bridge health monitoring. In: Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security 2009, March 9, 2009 - March 11, 2009. SPIE, San Diego, CA, United states (2009)
Vijayaraghavan, K., Kossett, A., Rajamani, R.: Passive Roadside Reflectors and Communications Systems for Improvement of Radar Reliability, p. 54 (2006)
Baldwin, J.D., et al.: Energy Harvesting on Highway Bridges, p. 24 (2011)
Wang, M., Chang, P.C., Newcomb, R.: Power scavenging from highway bridge vibration. In: 1st International Conference on Structural Health Monitoring and Intelligent Infrastructure, SHMII-1’2003, November 13, 2003 - November 15, 2003. Tokyo, Japan: A.A. Balkema (2003).
Symeoni, A.: A review on energy harvesting from roads (2013)
Huang, R.-B., et al.: Technical approach and research prospect of piezoelectric energy harvest from highway. Zhongguo Gonglu Xuebao/China J. Highway Transp. 25(6), 1–8 (2012)
Sun, C.-H., et al.: Designing piezoelectric harvesting unit from road vibration. In: 4th International Conference on Manufacturing Science and Engineering, ICMSE 2013, March 30, 2013 - March 31, 2013. Dalian, China: Trans Tech Publications Ltd. (2013)
Zhao, H.D., Ling, J.M., Fu, P.C.: A review of harvesting green energy from road. In: 8th International Conference on Road and Airfield Pavement Technology, ICPT 2013, July 14, 2013 - July 18, 2013. Trans Tech Publications Ltd., Taipei, Taiwan (2013)
Winchester, C.L., Salji, M.J., Kasivisvanathan, V.: Gathering preliminary data. J. Clinical Urology 10(6), 568–572 (2017)
NCBI: Preliminary studies and pilot testing. Field Trials of Health Interventions: A Toolbox 2015 [cited 2018 07/1/18]; 3rd https://www.ncbi.nlm.nih.gov/books/NBK305518/
University, Y. Experimental Design. Experimentation [cited 2018 06/05/2018] (1997) http://www.stat.yale.edu/Courses/1997-98/101/expdes.htm
Encyclopedia, W.t.F. Random sampling. Random assignment 02/11/2018 [cited 2018 03/10/18]; (2018). https://en.wikipedia.org/wiki/Random_assignment
Teaching, C.f.I.i.R.a. Types of Experimental Research. Experimental Research 07/28/2018 [cited 2018 04/28/2018]; (2018). https://cirt.gcu.edu/research/developmentresources/research_ready/experimental/design_types
Engineering, R.A.o. The Study of Root Mean Square (RMS) Value. Mechanical, Electrical, Electronics Engineering [cited 2018; (2018). https://www.raeng.org.uk/publications/other/8-rms
Technology, N.I.o.S.a., Tukey’s Method Handbook of Statistical Methods, ed. I.T.L. (ITL). Vol. 2018. MD, USA: NIST. Statistical method (2018)
Technology, N.I.o.S.a. Scheffe’s method. Engineering Statistics Hndbook [cited 2018 03/05/18]; Statistical method]. (2018). https://www.itl.nist.gov/div898/handbook/prc/section4/prc472.htm
Safayet, A.J.: Designing and Testing 3-D Printed Wafer-box with Embedded PZT Sensors to Identify the Shape Effect on Energy Harvesting. Electronic Theses and Dissertations. 1751 (2018). https://digitalcommons.georgiasouthern.edu/etd/1751
Acknowledgment
This research project was funded by the Georgia Technology Research Institute (GTRI) as part of the Kennedy Space Center (KSC) Vapor Trail Walkway Project with which GTRI contracted with Delaware North Companies (DNC) and NASA. See the research team website. http://pzmaterialtest.s3-website-us-east-1.amazonaws.com/
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Ahmad, S., Seonghoon, K., Mohammad, A., Junan, S., Yong, B. (2023). Developing a Prototype Piezoelectric Wafer-Box for Optimal Energy Harvesting. In: Arai, K. (eds) Proceedings of the Future Technologies Conference (FTC) 2022, Volume 3. FTC 2022 2022. Lecture Notes in Networks and Systems, vol 561. Springer, Cham. https://doi.org/10.1007/978-3-031-18344-7_1
Download citation
DOI: https://doi.org/10.1007/978-3-031-18344-7_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-18343-0
Online ISBN: 978-3-031-18344-7
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)