Abstract
The operation of electromechanical devices is accompanied by vibration generated by them. To ensure the reliability, it is important to solve the problem of reducing the vibration activity of electromechanical devices. One of the ways to reduce vibration levels is damping. In this paper, the developed construction of a solid-state damper based on foam aluminum. The features of the technological process of manufacturing foam aluminum with open pores are considered. The damping properties of foam aluminum are described. An idealized deformation diagram of highly porous materials with designated working areas is also shown. An example of the effective use of a solid-state damper based on foam aluminum is considered. An analytical study of the dynamic displacements of an electromechanical device in a steady-state operating mode was carried out on the basis of the use of the developed solid-state damper.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Taniwaki, S., Ohkami, Y.: Experimental and numerical analysis of reaction wheel disturbances. JSME Int. J. Ser. C Mech. Syst. Mach. Element. Manuf 46(2), 519–526 (2003)
Nashif, A., Jones, D., Henderson, J.: Oscillation damping. Mir, Moscow, Russia (1988)
Nur, G.S., Ryan, R.S., Scofield, H.N., Seeme, J.L.: Dynamics of large space structures and their control. Aerosp. Eng. 6, 129–147 (1985)
Telepnev, P.P., Kuznetsov, D.A.: Fundamentals of designing vibration protection for spacecraft: textbook. Ed. MSTU them. N.E. Bauman, Moscow (2019)
Taniwaki, S., Kanzawa, T., Ohkami, Y.: Sensing of micro noise caused by satellite fly-wheel using air floating disturbance detector. INTERMAC 2001 Joint Technical Conference (2001)
Butarovich, D.O., Smirnov, A.A., Ryabov, D.M.: Foam aluminum as an energy-absorbing material and its mechanical properties. Proc. High. Educ. Inst. Ser. Mech. Engi. 7, 53–58 (2011)
Markov, V.A., Ovchinnikov, A.F., Pusev, V.I., Selivanov V.V.: On the main features of the mechanical and shock-absorbing properties of highly porous aluminum alloys. In: Materials of the XVI International Symposium “Dynamic and Technological Problems of Mechanics of Structures and Continuous Media” named after A.G. Gorshkov, vol. 2, pp. 218–225 (2010)
Thorntor, P.H., Magee, C.L.: The deformation of aluminium foams. Met. Trans. A 6A(6), 1253–1263 (1975)
Wei, P., Liu, L.: Influence of density on compressive properties and energy absorption of foamed aluminium alloy. J. Wuhan Univ. Tech. Mater. Sci. 22(2), 225–228 (2007)
Petrov, Y.A., Makarov, V.P., Kolobov, A.Y., Aleshin V.F.: Spacecraft landing gear based on foam and honeycomb blocks. Science and Education. MSTU them. N.E. Bauman. Electron. 4, 153–163 (2010)
Nikolsky, L.N., Keglin, B.G.: Rolling stock shock absorbers. Mashinostroenie. Moscow, Russia (1986)
Gusarov, A.V., Zharikov, V.A., Markov, A.F., Ovchinnikov, V.I., Pusev, V.V., Selivanov, Sochikov, A.N.: Mechanical and shock-absorbing properties of highly porous cellular aluminum. Bulletin of MSTU im. N.E. Bauman. Ser. Mech. Eng. 1(74), 58–66 (2009)
Selivanov, V.V.: On the mechanical properties of highly porous aluminum alloys. Bulletin of the Nizhny Novgorod University. N.I. Lobachevsky 4(4), 1760–1762 (2011)
Modheja, A., Zahrai, S.M.: Numerical study of visco-hyperelastic damper with high axial damping rubber subjected to harmonic loading. Structures 29, 1550–1561 (2021)
Surzhikov, A.P., Peshev, V.V., Pritulov, A.M., Gyngazov, S.A.: Grain-boundary diffusion of oxygen in polycrystalline ferrites. Russ. Phys. J. 42(5), 490–495 (1999). https://doi.org/10.1007/BF02508222
Gavrilin, A.N., Chuprin, E.A., Moyzes, B.B., Halabuzar, E.A.: Land-based sources of seismic signals. In: Proceedings of 2014 International Conference on Mechanical Engineering, Automation and Control Systems MEACS 2014, 6986947 (2014). https://doi.org/10.1109/MEACS.2014.6986947
Veismoradi, S., Mohamad, S., Yousef-beik, M., Zarnani, P., Quenneville, P.: Development and parametric study of a new self-centering rotational friction damper. Eng. Struct. 235, 11209 (2021)
Amjadian, M., Agrawal, A.K., Silva, C.E., Dyke, S.J. : Experimental testing and validation of the dynamic model of a magneto-solid damper for vibration control. Mech. Syst. Signal Process. 166, 108479 (2021)
Cavalagli, N., Agresta, A., Biscarini, C., Ubertini, F., Ubertini, S.: Enhanced energy dissipation through 3D printed bottom geometry in Tuned Sloshing Dampers. J. Fluid Struct. 106, 103377 (2021)
Zaccardo, V.M., Buckner, G.D.: Active magnetic dampers for controlling lateral rotor vibration in high-speed rotating shafts. Mech. Sys. Signal Process. 152, 107445 (2021)
Sui, Y., Yu, H.: Oscillation of damped second order quasilinear wave equations with mixed arguments. Appl. Math. Lett. 117, 107060 (2021)
Zenelis, I., Wang, X.: A model-free sparse wide-area damping controller for inter-area oscillations. Int. J. Electr. Power Energy Syst. 136, 107609 (2021)
Su, X., Kang, H., Guo, T.: Modelling and energy transfer in the coupled nonlinear response of a 1:1 internally resonant cable system with a tuned mass damper. Mech. Syst. Signal Process. 162, 108058 (2021)
Sonowal, P., Pandey, K.M., Sharma, K.K.: Design and static analysis of landing gear shock absorber of commercial aircraft. Mater. Today Proc. 45(7), 6712–6717 (2021)
Acanfora, V., Saputo, S., Russo, A., Riccio A.: A feasibility study on additive manufactured hybrid metal/composite shock absorbers. Compos. Struct. 268, 113958. (2021)
Liu, M., Xu, J., Li, Q.: Design and experiment of piezoelectric-shape memory alloy composite shock absorber. Mater. Lett. 304, 130538 (2021).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Ermakov, D., Dmitriev, V. (2023). Solid State Damper Based on Foam Aluminum to Reduce Vibration Activity of Electromechanical Devices. In: Lysenko, E., Rogachev, A., Starý, O. (eds) Recent Developments in the Field of Non-Destructive Testing, Safety and Materials Science. ICMTNT 2021. Studies in Systems, Decision and Control, vol 433. Springer, Cham. https://doi.org/10.1007/978-3-030-99060-2_8
Download citation
DOI: https://doi.org/10.1007/978-3-030-99060-2_8
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-99059-6
Online ISBN: 978-3-030-99060-2
eBook Packages: EngineeringEngineering (R0)