Abstract
Quality tools allow improving health attention processes. Benchmarking is an effective tool because allows recognize success key factors to be replied in a specific sector. The sterilization department is the area in charge of reprocessing the necessary supplies for the care of patients in the institutions providing health services, hence good practices are important in this sector to guarantee patient safety and efficiency in the hospital service provision.
This investigation pretends to identify success key factors and high quality in eight sterilization departments in Colombia, from a comparative study. A multiple case study was carried out in recognized sterilization departments, with the application of a comparative evaluation tool based on AAMI and adjusted to the objectives, highlighting quality management, human talent management, information management and technology and process management. Results show the sterilization departments adaptation in quality management, human talent management, information and technology management and process management.
Sterilization departments in Colombia are adapting to the quality requirements of the environment, adjusting the operation to be cost-effective and consistent with the reality of the country. Leaders have a challenge to manage with quality and efficiency, although there is still progress in technological development and provide greater resources to the sector, the quality of the process and patient safety are guaranteed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Acosta-Gnass, S., Stempliuk, V.: Manual de esterilización para centros de salud (2008)
Seavey, R.E.: Sterile processing accreditation surveys: risk reduction and process improvement. AORN J. 102, 358–368 (2015). https://doi.org/10.1016/j.aorn.2015.07.005
Niel-Laine, J., et al.: Interest of the preliminary risk analysis method in a central sterile supply department. BMJ Qual. Saf. 20, 698–703 (2011). https://doi.org/10.1136/bmjqs.2010.048074
ACITEQ, ACFIQ, COLDINSQUI: Perfil y Competencias del Profesional en Instrumentación Quirúrgica en Colombia. 52 (2014). https://doi.org/10.1017/CBO9781107415324.004
Carr, S., Mak, Y.T., Needham, J.E.: Differences in strategy, quality management practices and performance reporting systems between ISO accredited and non-ISO accredited companies. Manag. Account. Res. 8, 383–403 (1997). https://doi.org/10.1006/mare.1996.0053
Rozo Rojas, I., et al.: Identification of key factors in the implementation of quality management practices in sterilization centers. In: Proceedings of the LACCEI international Multi-conference for Engineering, Education and TeCHIology (2017)
Rojas, I.R., et al.: Identificación de factores clave en la implementación de prácticas de gestión de calidad en centrales de esterilización. In: 15th LACCEI International Multi-Conference for Engineering, Education and Technology “Global Partnerships Development and Engineering Education, pp. 19–21 (2017). https://doi.org/10.18687/LACCEI2017.1.1.279
de Fátima Benato, F.S., Wilza Carla, S.: Analysis of quality indicators of central sterile supply departments at accredited public hospitals. Texto Context. - Enferm. 23, 426–433 (2014)
Ettorchi-Tardy, A., Levif, M., Michel, P.: Benchmarking: a method for continuous quality improvement in health. Healthc. Policy 7, 101–119 (2012). https://doi.org/10.12927/hcpol.2012.22872
Ministerio de Salud y Proteccion social: Resolucion 2003 de 2014 (2014)
Ministerio de Salud y Protección Social: Decreto Numero 903 De 2014 (2014)
Naranjo-Gil, D., Ruiz-Muñoz, D.: Aplicación del benchmarking en la gestión de la cadena de aprovisionamiento sanitaria: efectos sobre el coste y la calidad de las compras. Gac. Sanit. 29, 118–122 (2015). https://doi.org/10.1016/j.gaceta.2014.11.003
Elmuti, D., Kathawala, Y.: An overview of benchmarking process: a tool for continuous improvement and competitive advantage. Benchmark. Qual. Manag. Technol. 4, 229–243 (1997). https://doi.org/10.1108/14635779710195087
Dacosta-Claro, I., Lapierre, S.D.: Benchmarking as a tool for the improvement of health services’ supply departments. Heal. Serv Manag. Res. 16, 211–223 (2003). https://doi.org/10.1258/095148403322488919
Staiger, R.D., Schwandt, H., Puhan, M.A., Clavien, P.A.: Improving surgical outcomes through benchmarking. Br. J. Surg. 106, 59–64 (2019). https://doi.org/10.1002/bjs.10976
Rozo-Rojas, I., Díaz-Piraquive, F.N., Ordoñez-Díaz, M.S., de Jesús Muriel-Perea, Y.: Quality measurement in sterilization processes at healthcare organization in Colombia using six sigma metrics. In: Uden, L., Ting, I.-H., Corchado, J.M. (eds.) KMO 2019. CCIS, vol. 1027, pp. 297–306. Springer, Cham (2019). https://doi.org/10.1007/978-3-030-21451-7_25
Sangthong, K., Soparat, P., Moongtui, W., Danchaivijitr, S.: Development of quality indicators for sterilization practices of the central sterile supply department. J. Med. Assoc. Thail. = Chotmaihet thangphaet. 88(Suppl 1) (2005)
Stefan, R., Hermann, T., Mracek, M., Kopp, S., Steil, J.: Supporting workers and quality management in sterilization departments. In: van Berlo, A., Hallenborg, K., Rodríguez, J., Tapia, D., Novais, P. (eds.) Ambient Intelligence - Software and Applications. Advances in Intelligent Systems and Computing, vol. 219, pp. 137–145. Springer, Heidelberg (2013). https://doi.org/10.1007/978-3-319-00566-9
Ciarapica, F.E., Bevilacqua, M., Mazzuto, G., Paciarotti, C.: Business process re-engineering of surgical instruments sterilization process: a case study. Int. J. RF Technol. Res. Appl. 7, 1–29 (2016). https://doi.org/10.3233/RFT-150070
Piteres Redondo, R., Cabarcas Velázques, M., Hernández Gaspar, H.: The human resource factor of competitiveness in the health sector. Investig. Innov. Ing. 6, 93–101 (2018). https://doi.org/10.17081/invinno.6.1.2778
Guerrero Pupo, J.C., Amell Muñoz, I., Cañedo Andalia, R.: Tecnología, tecnología médica y tecnoslogía de la salud: algunas consideraciones básicas. Acimed 12, 1–16 (2004)
Díaz-Piraquive, F.N., Rincón-Gonzalez, C.: Análisis cienciométrico de los stakeholders en la gestión de proyectos. In: “El talento humano como factor clave en el éxito de los proyectos” Editorial Publicaciones EAN, Bogotá (2019)
Author information
Authors and Affiliations
Corresponding authors
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Switzerland AG
About this paper
Cite this paper
Ordoñez-Díaz, M.S., Díaz-Piraquive, F.N., de Jesús Muriel-Perea, Y. (2021). Benchmarking in Colombian Sterilization Departments. In: Uden, L., Ting, IH., Wang, K. (eds) Knowledge Management in Organizations. KMO 2021. Communications in Computer and Information Science, vol 1438. Springer, Cham. https://doi.org/10.1007/978-3-030-81635-3_18
Download citation
DOI: https://doi.org/10.1007/978-3-030-81635-3_18
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-81634-6
Online ISBN: 978-3-030-81635-3
eBook Packages: Computer ScienceComputer Science (R0)