Abstract
The special burner structure of oxy-fuel heating furnace can realize the dispersive combustion effect, so as to achieve the uniform combustion temperature and realize the industrial heating application. Studies have shown that the essence of diffuse combustion is a new mixed combustion phenomenon formed by the return of flue gas to entrain fuel and combustion aid, a large number of turbulent vortex structures exist in the process of mixed flow, the effect of diffuse combustion is determined by the characteristics of the vortex structure. In this paper, by numerically simulating the experiment of oxygen dispersion heating furnace, analyzing the influence of vortex structure characteristics in the furnace on the mixing, it is found that the reflux mixing process of oxygen dispersion combustion is mainly concentrated from the nozzle outlet to the three molecules in the furnace. Therefore, this paper focuses on the Q criterion and the Liutex vortex identification method to analyze the formation characteristics of the vortex structure in the front half of the furnace and the relationship with the diffuse combustion, and verify it with the Ω method. The results show that the Q criterion is basically the same as the Liutex method in identifying large eddies, but the small eddies are not recognized by the Q criterion. Therefore, the Liutex method is more accurate in identifying the vortex structure.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
P.-f. Li, Experimental and Numerical Investigation of the MILD Combustion of Gaseous Fuels in a Laboratory-Scale Furnace (Peking University, Beijing, 2013)
M. Katsuki, T. Hasegawa, The science and technology of combustion in highly preheated air. Proc. Combust. Inst. 27, 3135–3146 (1998)
A.K. Gupta, in Flame Characteristics and Challenges with High Temperature Air Combustion. Proceedings of 2000 International Joint Power Generation Conference, Miami Beach, Florida, 2000, vol 2, no 36, pp. 1–18
H. Tsuji, A. Gupta, D.G. Lilley, et al., High Temperature Air Combustion: From Energy Conservation to Pollution Reduction (CRC Press, FL, 2003)
J.A. Wünning, J.G. Wünning, Flameless oxidation to reduce thermal no-formation. Prog. Energy Combust. Sci. 23(1), 81–94 (1997)
C. Rottier, C. Lacour, G. Godard, B. Taupin, A.M. Boukhaifa, et al., in An Aerodynamic Way to Reach Mild Combustion Regime in a Laboratory-Scale Furnace. Third European Combustion Meeting ECM (2007)
C. Liu, Y. Yan, P. Lu, Physics of turbulence generation and sustenance in a boundary layer. Comput. Fluids 102, 353–384 (2014)
J.M. Wallace, Highlights from 50 years of turbulent boundary layer research. J. Turbul. 13(53), 1–70 (2013)
J. C. R. Hunt, A. A. Wray, P. Moin, Eddies, streams, and convergence zones in turbulent flows. Proceedings of the 1988 CTR Summer Program, pp. 193–208 (1988)
C. Liu, Y. Wang, Y. Yang, et al., New omega vortex identification method. Sci. China Phys. Mech. Astron. 59(8), 6–9 (2016)
C. Liu, Y. Wang, Y. Yang, et al., New omega vortex identification method. Sci. China Phys. Mech. Astron. 59(8), 684711 (2016)
Y.N. Zhang, K.H. Liu, J.W. Li, et al., Analysis of the vortices in the inner flow of reversible pump turbine with the new omega vortex identification method. J. Hydrodyn. 30(3), 463–469 (2018)
Y.N. Zhang, X. Qiu, F.P. Chen, et al., A selected review of vortex identification methods with applications. J. Hydrodyn. 30(5), 767–779 (2018)
C. Liu, Y. Gao, S. Tian, et al., Rortex—A new vortex vector definition and vorticity tensor and vector decompositions. Phys. Fluids 30, 035103 (2018)
Q. Ouyang, L.M. Zhao, L.Y. Wen, C.G. Bai, Simulation study on radiative imaging of pulverised coal combustion in blast furnace raceway. Ironmak. Steelmak. 38(3), 181–118 (2014)
J.C. Hunt, A.A. Wray, P. Moin, Eddies, stream, and convergence zones in turbulent flows. Center Turbul. Res. 25, 193–208 (1988)
X.R. Dong, Y.Q. Wang, F.P. Chen, Y.L. Dong, Y.N. Zhang, C.Y. Liu, Determination of epsilon for Omega vortex identification method. J. Hydrodyn. 30(04), 5–12 (2018)
Y. Gao, C. Liu, Rortex and comparison with eigenvalue- based vortex identification criteria. Phys. Fluids 30, 085107 (2018)
C. Liu, Y. Gao, X.R. Dong, et al., Third generation of vortex identification methods: Omega and Liutex/Rortex based systems. J. Hydrodyn. 31(2), 205–223 (2019)
Acknowledgments
This study was financially supported by National Natural Science Foundation of China (Grant Nos. 51964039, 51464041, 51164025) and National Natural Science Foundation of Inner Mongolia (Grant No. 2018MS05009).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Guo, C., Wu, Y., Liu, Z., Zhang, D. (2021). Eddy Current Research of Oxy-Fuel Heating Furnace Based on Third Generation Vortex Recognition Method. In: Liu, C., Wang, Y. (eds) Liutex and Third Generation of Vortex Definition and Identification. Springer, Cham. https://doi.org/10.1007/978-3-030-70217-5_29
Download citation
DOI: https://doi.org/10.1007/978-3-030-70217-5_29
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-70216-8
Online ISBN: 978-3-030-70217-5
eBook Packages: Physics and AstronomyPhysics and Astronomy (R0)