Abstract
Quality assurance in manufacturing engineering requires precise methods in order to implement quantitative techniques for processes control. Optical methods have proved to be suitable in manufacturing since they present several advantages over traditional approaches such as non-destructive, non-contact, and high speed, among others. For example, laser technologies provide a fundamental tool in optical metrology, and fiber optics offers versatility for multiparameter measurements. Optical methods offer improved technology for quality control monitoring in areas such as materials, pharmaceutical, and chemical.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Alemohammad H, Toyserkani E (2011) Metal embedded optical fiber sensors: laser-based layered manufacturing procedures 133(1):31015-1–31015-12. http://manufacturingscience.asmedigitalcollection.asme.org
Aristilde S, Cordeiro CM, Osorio JH (2019) Gasoline quality sensor based on tilted fiber Bragg gratings. Photonics 6(2):1–8. https://doi.org/10.3390/photonics6020051
Arango O, Trujillo AJ, Castillo M (2020) Inline control of yoghurt fermentation process using a near infrared light backscatter sensor. J Food Eng 277: https://doi.org/10.1016/j.jfoodeng.2019.109885
Chen YC, Chen JY (2019) Optical inspection system for gear tooth surfaces using a projection moiré method. Sensors (Switzerland) 19(6):E450. https://doi.org/10.3390/s19061450
Chullipalliyalil K, Lewis L, McAuliffe MAP (2020) Deep UV laser-induced fluorescence for pharmaceutical cleaning validation. Anal Chem 92(1):1447–1454. https://doi.org/10.1021/acs.analchem.9b04658
De León Martínez HA, Soto Bernal JJ, González Mota R, Rosales-Candelas I (2015) Optical evaluation on the setting of cement paste. J Phys Conf Ser 582(1):
El-Mesery HS, Mao H, Abomohra AEF (2019) Applications of non-destructive technologies for agricultural and food products quality inspection. Sensors 19:1–23. https://doi.org/10.3390/s19040846
Feng X, Senin N, Su R et al (2019) Optical measurement of surface topographies with transparent coatings. Opt Lasers Eng 121:261–270. https://doi.org/10.1016/j.optlaseng.2019.04.018
Ferreira FP, Forte PMF, Felgueiras PER et al (2017) Automatic optical inspection of regular grid patterns with an inspection camera used below the Shannon-Nyquist criterion for optical resolution. Photonic Instrum Eng IV 10110:101101Q. https://doi.org/10.1117/12.2267193
Gomes M, Cruz S, Lopes S, Arcipreste B, Magalhaes R, da Silva AF, Viana JC (2018) Distributed optical fiber sensors for PCB-strain analysis. IEEE Trans Ind Electron 66(10):8181–8188. https://doi.org/10.1109/TIE.2018.2885686
Hasheminejad N, Vuye C, Margaritis A et al (2019) Characterizing the complex modulus of asphalt concrete using a scanning laser doppler vibrometer. Materials (Basel) 12(21):3542. https://doi.org/10.3390/ma12213542
Hehr A, Norfolk M, Kominsky D et al (2020) Smart build-plate for metal additive manufacturing processes. Sensors 20:360. https://doi.org/10.3390/s20020360
Keulen C, Rocha B, Yildiz M, Suleman A (2011) Embedded fiber optic sensors for monitoring processing, quality and structural health of resin transfer molded components. In: 9th International conference on damage assessment of structures, 11–13 July 2011, University of Oxford
Lee BH, Kim YH, Park KS, Eom JB, Kim MJ, Rho BS, Choi HY (2012) Interferometric fiber optic sensors. Sensors 12(3):2467–2486. https://dio.org/10.3390/s120302467
Li L, Peng Y, Yang C, Li Y (2020) Optical sensing system for detection of the internal and external quality attributes of apples. Postharvest Biol Technol 162: https://doi.org/10.1016/j.postharvbio.2019.111101
Merzlyak MN, Solovchenko AE, Gitelson AA (2003) Reflectance spectral features and non-destructive estimation of chlorophyll, carotenoid and anthocyanin content in apple fruit. Postharvest Biol Technol 27:197–211. https://doi.org/10.1016/S0925-5214(02)00066-2
Moreno-Oliva VI, Román-Hernández E, Torres-Moreno E et al (2019) Measurement of quality test of aerodynamic profiles in wind turbine blades using laser triangulation technique. Energy Sci Eng 7:2180–2192. https://doi.org/10.1002/ese3.423
Noiseux I, Long W, Cournoyer A, Vernon M (2004) Simple fiber-optic-based sensors for process monitoring: an application in wine quality control monitoring. Appl Spectrosc 58(8):1010–1019. https://doi.org/10.1366/0003702041655476
Ohira SI, Miki Y, Matsuzaki T et al (2015) A fiber optic sensor with a metal organic framework as a sensing material for trace levels of water in industrial gases. Anal Chim Acta 886:188–193. https://doi.org/10.1016/j.aca.2015.05.045
Rodriguez AJ, Baldovino-Pantaleon O, Cruz RF, Zamarreño CR, Matías IR, May-Arrioja DA (2014) Gasohol quality control for real time applications by means of a multimode interference fiber sensor. Sensors 14(9):17817–17828. https://doi.org/10.3390/s140917817
Taheri Ghahrizjani R, Sadeghi H, Mazaheri A (2016) A novel method for onLine monitoring engine oil quality based on tapered optical fiber sensor. IEEE Sens J 16(10):3551–3555. https://doi.org/10.1109/JSEN.2016.2523805
Takeda S, Tsukada T, Minakuchi S, Takeda N, Iwahori Y (2017) Fiber-optic sensing for press forming of L-shaped thermoplastic composites. Procedia Eng 188(1):348–353. https://doi.org/10.1016/j.proeng.2017.04.494
Tunák M, Antoch J (2018) Monitoring homogeneity of textile fiber orientation. Text Res J 88(11):1226–1243. https://doi.org/10.1177/0040517517698983
Wang X, Xue L, He X, Liu M (2011) Vitamin C content estimation of chilies using Vis/NIR spectroscopy. In: International conference on electric information and control engineering, Wuhan, 2011, pp 1894–1897. https://doi.org/10.1109/ICEICE.2011.5777721
Wu Q, Zeng L, Zhou Q (2018) Phase I monitoring of optical profiles with application in low-emittance glass manufacturing. J Qual Technol 50(3):262–278. https://doi.org/10.1080/00224065.2018.1474687
Yeong TJ, Jern KP, Yao LK et al (2019) Applications of photonics in agriculture sector: a review. Molecules 24. https://doi.org/10.3390/molecules24102025
Yuan GH, Zheludev XI (2019) Detecting nanometric displacements with optical ruler metrology. Science 364(6442):771–775. https://doi.org/10.1126/science.aaw7840
Zhu T, Wu D, Liu M, Duan DW (2012) In-line fiber optic sensors in single-mode fibers. Sensors 12(8):10430–10449. https://doi.org/10.3390/s120810430
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Calles-Arriaga, C.A. et al. (2021). Recent Optical Approaches for Quality Control Monitoring in Manufacturing Processes. In: García Alcaraz, J.L., Sánchez-Ramírez, C., Gil López, A.J. (eds) Techniques, Tools and Methodologies Applied to Quality Assurance in Manufacturing . Springer, Cham. https://doi.org/10.1007/978-3-030-69314-5_2
Download citation
DOI: https://doi.org/10.1007/978-3-030-69314-5_2
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-69313-8
Online ISBN: 978-3-030-69314-5
eBook Packages: EngineeringEngineering (R0)