Abstract
The article deals with the development of methods for mathematical modeling of a temperature field around a hot-water system for channel-free laying by means of conformal mapping. A major disadvantage of the existing numerical methods for designing temperature fields around pipelines of heat supply systems is a high likelihood of errors due to instability of suggested solutions and convergence problems that still remained unaddressed. These solutions can be made more accurate by using analytical calculation methods, e.g., the conformal mapping method. An essential characteristic of a model in question is a possibly accurate analytical solution for designing temperature fields and streamlines. The implementation of various available functions in symbolic mathematical packages (in particular, linear-fractional ones) retains a high accuracy in numerical studies of the models. Using mathematical models for designing streamlines and temperature fields by means of the theory of conformal mappings, a solution can be obtained that is as identical as possible to the analytical one, which would ultimately enable us to improve the accuracy of the results. These results can be employed in design and reconstruction of heat supply systems.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Arefiev, N., Mikhalev, M., Zotov, D., et al.: Physical modeling of suspended sediment deposition in marine intakes of nuclear power plants. Procedia Eng. 117(1), 32–38 (2015). https://doi.org/10.1016/j.proeng.2015.08.120
Riso, Ch., Riccardi, G., Mastroddi, F.: Nonlinear aeroelastic modeling via conformal mapping and vortex method for a flat-plate airfoil in arbitrary motion. J. Fluids Struct. 6, 230–251 (2016). https://doi.org/10.1016/j.jfluidstructs.2016.02.002
Khabakhpasheva, T.I., Kim, Y., Korobkin, A.A.: Generalised Wagner model of water impact by numerical conformal mapping. Appl. Ocean Res. 44, 29–38 (2014). https://doi.org/10.1016/j.apor.2013.10.007
Vranayova, Z., Kaposztasova, D.: Hot water tanks from the point of view of temperature and energy confrontation. In: E3S Web of Conferences, vol. 45, p. 00099 (2018). https://doi.org/10.1051/e3sconf/20184500099
Wojtkowiak, J., Oleśkowicz-Popiel, C.: Investigations of hot water temperature changes at the pipe outflow. In: E3S Web of Conferences, vol. 22, p. 00186 (2017). https://doi.org/10.1051/e3sconf/20172200186
Chappelear, J.E., Hirasaki, G.J.: A model of oil-water coning for two-dimensional, areal reservoir simulation. Soc. Petrol. Eng. J. 16(02), 65–72 (1976). https://doi.org/10.2118/4980-pa
Eilerts, C.K., Sumner, E.F.: Integration of partial differential equations for multicomponent, two-phase transient radial flow. Soc. Petrol. Eng. J. 7(02), 125–135 (1967). https://doi.org/10.2118/1499-pa
Korovin, I.S., Tkachenko, M.G.: Intelligent oilfield model. Procedia Comput. Sci. 101, 300–303 (2016). https://doi.org/10.1016/j.procs.2016.11.035
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Loboda, A., Chuikin, S., Plaksina, E., Gulak, L. (2021). Modeling Using Conformal Mapping of a Temperature Field Around a Hot-Water System for Channel-Free Laying. In: Murgul, V., Pukhkal, V. (eds) International Scientific Conference Energy Management of Municipal Facilities and Sustainable Energy Technologies EMMFT 2019. EMMFT 2019. Advances in Intelligent Systems and Computing, vol 1259. Springer, Cham. https://doi.org/10.1007/978-3-030-57453-6_20
Download citation
DOI: https://doi.org/10.1007/978-3-030-57453-6_20
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-57452-9
Online ISBN: 978-3-030-57453-6
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)