Abstract
In the automobile industry, in order to clean paint from structures on which cars-bodies are transported and painted, the ultra-high water blasting is used on regular basis. The objective of this study was to identify and analyze the safety and health risks related to the water blasting activity, and give suggestions in order to eliminate or reduce those risks. For this purpose, a study was conducted in an automobile industry in Brazil, using two self-made questionnaires, one checklist, the Preliminary Risk Analysis and the Hazard Rating Number. In total ten risks were identified and analyzed, giving recommendations on additional measures to be applied in order to eliminate or reduce the risks for the worker. By analyzing the Brazilian norms considering water blasting, it was identified that workers should rotate after water blasting of each skid. Further studies should be conducted in order to quantify the level of noise during the activity, to evaluate the risk of hearing loss, and give specific suggestions in order to improve the conditions.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
ANFAVEA. Anuário da Indústria Automobilística Brasileira [Internet] (2018). Available from http://www.anfavea.com.br/anuarios.html
Ministério do Trabalho: NR-34 - Condições e meio ambiente de trabalho na indústria da construção, reparação e desmonte naval [Internet] (2018). Available from https://enit.trabalho.gov.br/portal/images/Arquivos_SST/SST_NR/NR-34.pdf
The Water Jetting Association: Code of Practice for the Use of High-Pressure Water Jetting Equipment. The Water Jetting Association, London (2015)
Radojevic, N., Radnic, B., Curovic, I.: Fatal penetrating injuries sustained by high-pressure. Water jet unit. J. Forensic Sci. 60(6), 1652–1653 (2015)
Rodríguez-Villar, S., Kennedy, R.C., Dall’Antonia, M., Menichetti, C.P.: Management of industrial high-pressure fluid injection injuries (IHPFII): the Water Jetting Association (WJA) experience with water driven injuries. Eur. J. Trauma Emerg. Surg. [Internet]. 45(3), 507–15 (2019). Available from http://dx.doi.org/10.1007/s00068-019-01106-4
Norma Técnica SABESP NTS 185. Preparo de superfícies metálicas – Métodos alternativos ao jato de areia seca [Internet]. São Paulo (2002). Available from http://www2.sabesp.com.br/normas/nts/NTS185.pdf
Rosenwasser, M.P., Wei, D.H.: High-pressure injection injuries to the hand. J. Am. Acad. Orthop. Surg. 22(1), 38–45 (2014)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Azevedo Dobbin, B. et al. (2020). Risk Analysis of Water Blasting Activity in the Automobile Industry. In: Arezes, P., et al. Occupational and Environmental Safety and Health II. Studies in Systems, Decision and Control, vol 277. Springer, Cham. https://doi.org/10.1007/978-3-030-41486-3_22
Download citation
DOI: https://doi.org/10.1007/978-3-030-41486-3_22
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-41485-6
Online ISBN: 978-3-030-41486-3
eBook Packages: EngineeringEngineering (R0)