Abstract
The efficiency of air conditioning (AC) systems depends on the operation of their air coolers at varying heat loads in response to current changeable climatic conditions. In general case, an overall heat load of any AC system comprises the unstable range, corresponding to ambient air processing with heat load fluctuations, and a comparatively stable part for subsequent air subcooling. Following from this approach, a rational design overall heat load is chosen to provide a maximum annular refrigeration capacity generation and divided into a comparatively stable basic part and a remaining part for ambient air precooling at changeable heat loads. The ambient air precooling mode with considerable heat load fluctuation needs load modulation, whereas the comparatively stable heat load range can be covered by operation at about nominal mode. According to modern trend in AC systems the load modulation is performed by varying refrigerant feed to air coolers in Variable Refrigerant Flow (VRF) system. But with this the problem of inefficient operation of air coolers caused by dry-out of inner walls at the final stage of inside tube refrigerant evaporation followed by dropping the intensity of heat transfer remains unsolved. As alternative approach of the heat load modulation in AC systems there is a concept of incomplete refrigerant evaporation with overfilling air coils that leads to excluding a dry-out of inner surface of air coils and is realized through liquid refrigerant recirculation by injector (jet pump).
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Chaddock, J.B., Varma, H.K.: An experimental investigation on dry-out with R22 evaporating in a horizontal tube. ASHRAE Trans. 85, 105–121 (1979)
Bohdal, T., Sikora, M., Widomska, K., Radchenko, A.M.: Investigation of flow structures during HFE-7100 refrigerant condensation. Arch. Thermodyn.: Pol. Acad. Sci. 36(4), 25–34 (2015)
Khovalyg, D.M., Baranenko, A.V.: Dynamics of two-phase flow with boiling refrigerant R134a in minichannels. J. Tech. Phys. 85(3), 34–41 (2015)
Thome, Y.R., Dupont, V., Yacobi, A.M.: Heat transfer model for evaporation in microchannels. Part 1: presentation of the model. Int. J. Heat Mass Transf. 47, 3375–3385 (2004)
Thome, Y.R., Dupont, V., Yacobi, A.M.: Heat transfer model for evaporation in microchannels. Part II: comparison with the database. Int. J. Heat Mass Transf. 47, 3387–3401 (2004)
Chua, K.J., Chou, S.K., Yang, W.M., Yan, J.: Achieving better energy-efficient air conditioning – a review of technologies and strategies. Appl. Energy 104, 87–104 (2013)
Butrymowicz, D., Gagan, J., Śmierciew, K., Łukaszuk, M., Dudar, A., Pawluczuk, A., Łapiński, A., Kuryłowicz, A.: Investigations of prototype ejection refrigeration system driven by low grade heat. In: HTRSE-2018, E3S Web of Conferences, vol. 70, pp. 03002, 7 p. (2018)
Smierciew, K., Gagan, J., Butrymowicz, D., Karwacki, J.: Experimental investigations of solar driven ejector air-conditioning system. Energy Build. 80, 260–267 (2014)
Radchenko, N.: On reducing the size of liquid separators for injector circulation plate freezers. Int. J. Refrig. 8(5), 267–269 (1985)
Elbel, S., Lawrence, N.: Review of recent developments in advanced ejector technology. Int. J. Refrig. 62, 1–18 (2016)
Radchenko, R., Radchenko, A., Serbin, S., Kantor, S., Portnoi, B.: Gas turbine unite inlet air cooling by using an excessive refrigeration capacity of absorption-ejector chiller in booster air cooler. In: HTRSE-2018, E3S Web of Conferences, vol. 70, pp. 03012, 6 p. (2018)
Radchenko, A., Radchenko, M., Konovalov, A., Zubarev, A.: Increasing electrical power output and fuel efficiency of gas engines in integrated energy system by absorption chiller scavenge air cooling on the base of monitoring data treatment. In: HTRSE-2018, E3S Web of Conferences, vol. 70, pp. 03011, 6 p. (2018)
Radchenko, M., Radchenko, R., Ostapenko, O., Zubarev, A., Hrych, A.: Enhancing the utilization of gas engine module exhaust heat by two-stage chillers for combined electricity, heat and refrigeration. In: 5th International Conference on Systems and Informatics, ICSAI 2018, Jiangsu, Nanjing, China, pp. 240–244 (2019)
Konovalov, D., Kobalava, H.: Efficiency analysis of gas turbine plant cycles with water injection by the aerothermopressor. In: Ivanov, V., et al. (eds.) Advances in Design, Simulation and Manufacturing II. DSMIE 2019. Lecture Notes in Mechanical Engineering, pp. 581–591. Springer, Cham (2020)
Radchenko, M., Radchenko, R., Kornienko, V., Pyrysunko, M.: Semi-empirical correlations of pollution processes on the condensation surfaces of exhaust gas boilers with water-fuel emulsion combustion. In: Ivanov, V., et al. (eds.) Advances in Design, Simulation and Manufacturing II. DSMIE 2019. Lecture Notes in Mechanical Engineering, pp. 853–862. Springer, Cham (2020)
Bohdal, L., Kukielka, L., Świłło, S., Radchenko, A.M., Kułakowska, A.: Modelling and experimental analysis of shear-slitting process of light metal alloys using FEM, SPH and vision-based methods. In: AIP Conference Proceedings, vol. 2078, pp. 020060 (2019)
Bohdal, L., Kukielka, L., Radchenko, A.M., Patyk, R., Kułakowski, M., Chodór, J.: Modelling of guillotining process of grain oriented silicon steel using FEM. In: AIP Conference Proceedings, vol. 2078, pp. 020080 (2019)
Goetzler, W.: Variable refrigerant flow systems. ASHRAE J. 49(4), 24–31 (2007)
Ilie, A., Dumitrescu, R., Girip, A., Cublesan, V.: Study on technical and economical solutions for improving air-conditioning efficiency in building sector. Energy Procedia 112, 537–544 (2017)
Im, P., Malhotra, M., Munk, J.D., Lee, J.: Cooling season full and part load performance evaluation of variable refrigerant flow (VRF) system using an occupancy simulated research building. In: Proceedings of the 16th International Refrigeration and Air Conditioning Conference at Purdue, West Lafayette, USA (2016)
Khatri, R., Joshi, A.: Energy performance comparison of inverter based variable refrigerant flow unitary AC with constant volume unitary AC. Energy Procedia 109, 18–26 (2017)
Lee, J.H., Yoon, H.J., Im, P., Song, Y.-H.: Verification of energy reduction effect through control optimization of supply air temperature in VRF-OAP system. Energies 11(1), 49 (2018)
Park, D.Y., Yun, G., Kim, K.S.: Experimental evaluation and simulation of a variable refrigerant-flow (VRF) air-conditioning system with outdoor air processing unit. Energy Build. 146, 122–140 (2017)
Yun, G.Y., Choi, J., Kim, J.T.: Energy performance of direct expansion air handling unit in office buildings. Energy Build. 77, 425–431 (2014)
Sait, H.H.: Estimated thermal load and selecting of suitable air-conditioning systems for a three story educational building. Procedia Comput. Sci. 19, 636–645 (2013)
Zhang, L., Wang, Y., Meng, X.: Qualitative analysis of the cooling load in the typical room under continuous and intermittent runnings of air-conditioning. Procedia Eng. 205, 405–409 (2017)
Zhou, Y.P., et al.: Simulation and experimental validation of the variable-refrigerant-volume (VRV) air-conditioning system in Energy Plus. Energy Build. 40, 1041–1047 (2008)
Liu, C., Zhao, T., Zhang, J.: Operational electricity consumption analyze of VRF air conditioning system and centralized air conditioning system based on building energy monitoring and management system. Procedia Eng. 121, 1856–1863 (2015)
Zhou, Y.P., Wu, J.Y., Wang, R.Z.: Energy simulation in the variable refrigerant flow air-conditioning system under cooling conditions. Energy Build. 39, 212–220 (2007)
Zhu, Y., Jin, X., Du, Z., Fang, X., Fan, B.: Control and energy simulation of variable refrigerant flow air conditioning system combined with outdoor air processing unit. Appl. Therm. Eng. 64, 385–395 (2014)
Eidan, A.A., Alwan, K.J.: Enhancement of the performance characteristics for air-conditioning system by using direct evaporative cooling in hot climates. Energy Procedia 142, 3998–4003 (2017)
Enteria, N., Yamaguchi, H., Miyata, M., Sawachi, T., Kuwasawa, Y.: Performance evaluation of the variable refrigerant flow (VRF) air-conditioning system subjected to partial and unbalanced thermal loadings. J. Therm. Sci. Technol. 11(1), 1–11 (2016)
Southard, L.E., Saab, R., Ali, M.I.H.: Variable-refrigerant-flow cooling-systems performance at different operation-pressures and types-of-refrigerants. Energy Procedia 119, 426–432 (2017)
Yun, G.Y., Lee, J.H., Kim, H.J.: Development and application of the load responsive control of the evaporating temperature in a VRF system for cooling energy savings. Energy Build. 116, 638–645 (2016)
Radchenko, A., Radchenko, M., Trushliakov, E., Kantor, S., Tkachenko, V.: Statistical method to define rational heat loads on railway air conditioning system for changeable climatic conditions. In: 5th International Conference on Systems and Informatics, ICSAI 2018, Jiangsu, Nanjing, China, pp. 1308–1312 (2018)
Trushliakov, E., Radchenko, M., Radchenko, A., Kantor, S., Zongming, Y.: Statistical approach to improve the efficiency of air conditioning system performance in changeable climatic conditions. In: 5th International Conference on Systems and Informatics, ICSAI 2018, Jiangsu, Nanjing, China, pp. 1303–1307 (2018)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Trushliakov, E., Radchenko, M., Bohdal, T., Radchenko, R., Kantor, S. (2020). An Innovative Air Conditioning System for Changeable Heat Loads. In: Tonkonogyi, V., et al. Advanced Manufacturing Processes. InterPartner 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-40724-7_63
Download citation
DOI: https://doi.org/10.1007/978-3-030-40724-7_63
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-40723-0
Online ISBN: 978-3-030-40724-7
eBook Packages: EngineeringEngineering (R0)