Abstract
The aim of this paper is to analyse the structure of a transformer subjected to the seismic impact, determine the state of critical stresses on the structure, but also to ensure that the structure remains undestroyed after the impact of seismic forces. The numerical calculations, in particular those related to the structure load states, were based on the standard: IEEE Std 693-2005, IEEE Recommended Practice for Seismic Design of Substations.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Chun L, Deping Y (2015) Seismic safety evaluation of power transformer based on response spectrum method. In: 3rd international conference on machinery, materials and information technology applications (ICMMITA), pp 1139–1142
Płatek R, Juszkiewicz G (2011) Computer aided seismic analyses for transformers. Techn Trans Mech 7:439–447
Shendge AD (2005) Earthquake resistant design of a transformer. WIT Trans Built Environ 81:395–404
Iwasaki S et al (2017) Latest trends of transformer bushing seismic analysis. Electron Commun Jpn 100(1):27–43
Sinvhal et al (2015) Seismic analysis of transformer using different mode combination methods. Int J Sci Res Dev 3(04):773–777
Bellorini S et al (1998) Seismic qualification of transformer high voltage bushings. IEEE Trans Power Deliv 13(4):1208–1213
Wen B et al (2017) Experimental and analytical studies on multiple tuned mass dampers for seismic protection of porcelain electrical equipment. Earthq Eng Eng Vib 16:803–813
Dembowski P et al (2010) Modelowanie odpowiedzi odłącznika wysokiego napięcia SGF 123 podczas trzęsienia ziemi. Modelowanie Inżynierskie 40, Gliwice, pp 55–60
Stefanov D (2008) Seismic qualification of sst auxiliary transformer. in: The 14-th World conference on earthquake engineering, Beijing, China, 12–17 October 2008
Dharmanto A, Shokeh M (2005) Construction of power transformer tank against high seismic required response spectrum. in: The 21st conference of electric power supply industry (CEPSI 2016), Bangkok China, 23–27 October 2016
Wen B et al (2017) Soil–structure–equipment interaction and influence factors in an underground electrical substation under seismic loads. Appl Sci 7, 1044
Huo J-R, Hwang HHM (1995) Seismic fragility analysis of equipment and structures in a memphis electric substation. Technical Report NCEER-95-0014, National center for earthquake engineering research, State University of New York at Buffalo
Wang X et al (2017) Seismic response analysis of concrete lining structure in large underground powerhouse. Hindawi Mathematical Problems in Engineering Volume 2017
Yan C, Hao Z, Zhang S, Zhang B, Zheng T (2015) Numerical methods for the analysis of power transformer tank deformation and rupture due to internal arcing faults. PLoS ONE 10(7):e0133851
Platek R, Juszkiewicz G (2014) Seismic analyses for power transformers. J Energy 63(Special Issue):209–216
Zhang X et al (2014) Seismic reliability of UHV porcelain arrester with damping system. Open Electr Electr Eng J 8:222–228
Liu Ch et al (2017) Study on earthquake response of high voltage electrical equipment coupling system with flexible Busbar. In: IOP conference series: materials science and engineering, vol 280:012023
Ersoy S, Saadeghvaziri MA (2004) Seismic response of transformer-bushing systems. Trans Power Deliv 19(1)
Saadeghvaziri MA et al (2010) On seismic response of substation equipment and application of base isolation to transformers. Trans Power Deliv 25(1)
Filiatrault A et al (2015) Experimental seismic response of high-voltage transformer-bushing systems. Earthq Spectra 21(4):1009–1025
Płatek R et al (2010) Fluid influence on dynamic characteristics of transformer-bushing system using fluid structure interaction (FSI) approach. IEEE Trans Dielectr Electr Insulation 17(2)
Hatami M et al (2004) Experimental and analytical study of a high voltage instrument transformer. In: 13th World conference on earthquake engineering, vancouver, B.C., Canada, 1–6 August 2004, Paper No. 2550
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Duda, S., Kciuk, S., Gniłka, J., Kaszyca, T. (2019). Numerical Investigations of the Influence of Seismic Vibrations on the Transformer Structure. In: Rusiński, E., Pietrusiak, D. (eds) Proceedings of the 14th International Scientific Conference: Computer Aided Engineering. CAE 2018. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-04975-1_20
Download citation
DOI: https://doi.org/10.1007/978-3-030-04975-1_20
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-04974-4
Online ISBN: 978-3-030-04975-1
eBook Packages: EngineeringEngineering (R0)