Abstract
The recent improvement of wireless communication networks has made possible for using such networks at the lowest levels of factory automation systems , which typically imposes severe requirements in terms of real-time communication , reliability, and dependability . However, industrial plants represent a hostile environment due to the presence of different noise sources. The presence of these noises can easily inflict damages on the wireless information signals and creates erroneous interruptions on the data transmitted. Wireless Fieldbus can be one of solution where real time communication between controllers and sensor/actuators at the field level of factory automation. Wireless Fieldbus technologies have the potential capability and significant benefits in industrial application. In factory automation, the cost and time needed for the installation and maintenance of the large number of cables can be reduced by wireless technology. This is important in harsh environment where vibrations, high temperature, or moving parts exist that could potentially damage any sort of cabling. The objective of this chapter lies on the feasibility analysis on usage Wireless Fieldbus technologies and comparison of recent industrial wireless technology. For this, we investigate the fundamental problem of Wireless Fieldbus and details of each wireless technology at factory automation.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Kim D-S, Lee YS, Kwon WH, Park HS (2003) Maximum allowable delay bounds of networked control systems. Control Eng Practice 11(11):1301–1313
Willig A, Matheus K, Wolisz A (2005) Wireless technology in industrial networks. Proc IEEE 93(6):1130–1151
Matkurbanov P, Lee S, Kim D-S (2006) A survey and analysis of wireless Fieldbus for industrial environments. In: SICE-ICASE, international joint conference, IEEE, 2006, pp 5555–5561
Thomesse J-P (2002) Fieldbuses and quality of service. In: 5th Portuguese conference on automatic control-controlo, pp 10–14
Fantoni D (1999) A never-ending story: the Fieldbus standardization. Automazione e Strumentazione 47(11):69–75
Thomesse JP (1999) Fieldbuses and interoperability. Control Eng Pract 7(1):81–94
https://www.bluetooth.org. Bluetooth standard
Decotignie J-D (2002) Wireless Fieldbusses–a survey of issues and solutions. In: Proceedings 15th IFAC world congress on automatic control (IFAC), 2002
Morel P, Croisier A, Decotignie J-D (1996) Requirements for wireless extensions of a FIP Fieldbus. In: Emerging technologies and factory automation, EFTA’96. Proceedings, vol 1, pp 116–122
Cavalieri S, Panno D (1998) A novel solution to interconnect Fieldbus systems using IEEE Wireless Lan technology. Comput Standards Interfaces 20(1):9–23
Morel P, Croisier A (1995) A wireless gateway for Fieldbus. In: Sixth IEEE international symposium on, vol 1. IEEE, 1995, pp 105–109
Thomesse JP (2000) Radio communication in automation systems: the R-Fieldbus approach. In: IEEE international workshop on factory communication systems, 2000, pp 319–326
Rauchhaupt L (2002) System and device architecture of a radio based Fieldbus—the R-Fieldbus system. In: IEEE international workshop on factory communication systems, 2002, pp 185–192
De Pellegrini F, Miorandi D, Vitturi S, Zanella A (2006) On the use of wireless networks at low level of factory automation systems. IEEE Trans Ind Inform 2(2):129–143
Miorandi D, Vitturi S (2004) Analysis of master-slave protocols for real-time industrial communications over IEEE 802. 11 WLANS. In: 2nd IEEE international conference on industrial informatics, INDIN’04, 2004, pp 143–148
Willig A, Kubisch M, Hoene C, Wolisz A (2002) Measurements of a wireless link in an industrial environment using an IEEE 802.11—compliant physical layer. IEEE Trans Ind Electron 49(6):1265–1282
Choi D-H, Lee JI, Kim D-S, Park WC (2006) Design and implementation of wireless Fieldbus for networked control systems. In: SICE-ICASE, IEEE international joint conference, 2006, pp 1036–1040
Neumann P (2007) Communication in industrial automation what is going on? Control Eng Prac 15(11):1332–1347
Haehniche J, Rauchhaupt L (2000) Radio communication in automation systems: the R-Fieldbus approach. In: IEEE international workshop on factory communication systems, 2000, pp 319–326
Winance M (2007) Being normally different changes to normalization processes: from alignment to work on the norm. Disabil Soc 22(6):625–638
Juanole G (2002) Quality of service of communication networks and distributed automation: Models and performances. In: Proceedings of 15th triennial IFAC world congress, 2002
Elloy J-P, Simonot-Lion F et al. (2002) An architecture description language for in-vehicle embedded system development. In: 15th IFAC world congress, Barcelona, Spain, 2002
Simonot-Lion F (1999) Une contribution a la modelisation et´ a la validation d’architectures temps reel, HDR thesis, INPL, Nancy, France, 1999
Neumann P, Diedrich C, Simon R (2002) Engineering of field devices using device descriptions. In: Proceedings IFAC world congress, 2002
Neumann P (1999) Locally distributed automation–but with which Fieldbus system? Assembly Autom 19(4):308–312
Decotignie J-D (1999) Some future directions in Fieldbus research and development, In: Fieldbus technology, Springer, Berlin, pp 308–312
Cucej Z, Gleich D, Kaiser M, Planinsic P (2004) Industrial networks. In: 46th international symposium electronics in Marine, 2004, pp 59–66
Cavalieri S, Monforte S, Tovar E, Vasques F (2002) Multi-master profibus-DP modelling and worst-case analysis based evaluation. In: Proceedings of the 15th IFAC world congress on automatic control, Barcelona, Spain, 2002
Partner R, THOB T, NTU D. D B3. 5-specification of residential gateway enhancements
Feuerstein MJ, Blackard KL, Rappaport TS, Xia H (1994) Path loss, delay spread, and outage models as functions of antenna height for microcellular system design. IEEE Trans Veh Technol 43(3):487–498
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Kim, DS., Tran-Dang, H. (2019). Wireless Fieldbus for Industrial Networks. In: Industrial Sensors and Controls in Communication Networks. Computer Communications and Networks. Springer, Cham. https://doi.org/10.1007/978-3-030-04927-0_9
Download citation
DOI: https://doi.org/10.1007/978-3-030-04927-0_9
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-04926-3
Online ISBN: 978-3-030-04927-0
eBook Packages: Computer ScienceComputer Science (R0)