Abstract
Materials in nuclear power system can suffer from thermal/hydrothermal, radiation and chemical degradation due to the high-temperature, high-pressure operation condition along with the presence of water steam and radiation. One particular topic we are addressing is understanding and optimizing materials for fission gas capture. Computational modeling is an efficient tool to investigate materials behaviour in such extreme environment. Westudied a number of materials. One of these is mesoporous silica. We used a combination of Molecular Dynamics (MD) simulation and Monte Carlo (MC) simulation which were validated by detailed experiments. MD simulations reveal the porous structure transformation under high-temperature treatment up to 2885 K, suggesting the pore closure process is kinetically dependent. Based on this mechanism, we predict with the presence of water, the pore closure activation energy will be decreased due to the high reactivity between water and Si-O bond, and the materials become more susceptible to high temperature. A fundamental improvement of the material hydrothermal stability thus lies in bond strengthening. MC simulations then were used to study the the adsorption and selectivity for thermally treated MCM-41, for a variety o f gases in a large pressure range. Relative to pristine MCM-41, we observe that high temperature treated MCM 41 with its surface roughness and decreasing pore size amplifies the selectivity of gases. In particular, we find that adsorption of strongly interacting molecules can be enhanced in the low-pressure region while adsorption of weakly interacting molecules is inhibited. We have also investigated alumina as an example of a ceramic material that can be directly incorporated into the nuclear fuel itself. Unlike uranium oxide fuel, certain phases of alumina have appreciable capacity for gas absorption. The limited diffusion distance of helium and other fission product gases in the fuel may be addressed by coating micron-sized fuel particles with alumina, prior to sintering, using a unique atomic layer deposition process suitable for particles. We have investigated the feasibility of this approach using a combination of helium-focused experiments on fuel surrogate particles, together with analytical calculations of gas production rates and diffusion distances in uranium oxide. Additional studies of nanotubes of carbon and boronitride elucidated fundamental mechanisms of the influence of curvature on gas adsorption.
Shenli Zhang and Haoyan Sha (equal contribution first author).
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
H. Stehle, Performance of oxide nuclear fuel in water-cooled power reactors. J. Nucl. Mater. 153, 3–15 (1988)
R.E. Stoller, The influence of helium on microstructural evolution: implications for dt fusion reactors. J. Nucl. Mater. 174(2), 289–310 (1990)
C. Walker, W. Goll, T. Matsumura, Further observations on OCOM MOX fuel: microstructure in the vicinity of the pellet rim and fuel-cladding interaction. J. Nucl. Mater. 245(23), 169–178 (1997)
I. Zacharie, S. Lansiart, P. Combette, M. Trotabas, M. Coster, M. Groos, Microstructural analysis and modelling of intergranular swelling of an irradiated UO2 fuel treated at high temperature. J. Nucl. Mater. 255(23), 92–104 (1998)
I. Zacharie, S. Lansiart, P. Combette, M. Trotabas, M. Coster, M. Groos, Thermal treatment of uranium oxide irradiated in pressurized water reactor: swelling and release of fission gases. J. Nucl. Mater. 255(23), 85–91 (1998)
H. Sha, R. Faller, Molecular simulation of adsorption and separation of pure noble gases and noble gas mixtures on single wall carbon nanotubes. Comput. Mater. Sci. 114, 160–166 (2016)
M.P. Allen, D.J. Tildesley, Computer Simulation of Liquids (Oxford University Press, Oxford, UK, 1989)
D. Frenkel, B. Smit, Understanding Molecular Simulation: From Algorithms to Applications (Academic Press, San Diego, CA, 2001)
J. Jiang, S.I. Sandler, Nitrogen adsorption on carbon nanotube bundles: role of the external surface. Phys. Rev. B 68(24), 245412 (2003)
A. Thess, R. Lee, P. Nikolaev, H. Dai, P. Petit, J. Robert, C. Xu, Y.H. Lee, S.G. Kim, A.G. Rinzler, D.T. Colbert, G.E. Scuseria, D. Tomanek, J.E. Fischer, R.E. Smalley, Crystalline ropes of metallic carbon nanotubes. Science 273(5274), 483–487 (1996)
C. Journet, W.K. Maser, P. Bernier, A. Loiseau, M.L. de la Chapelle, S. Lefrant, P. Deniard, R. Lee, J.E. Fischer, Large-scale production of single-walled carbon nanotubes by the electric-arc technique. Nature 388(6644), 756–758 (1997)
G. Stan, M.J. Bojan, S. Curtarolo, S.M. Gatica, M.W. Cole, Uptake of gases in bundles of carbon nanotubes. Phys Rev B 62(3), 2173–2180 (2000)
M.D. Zeidler, R.O. Watts, I.J. McGee, Liquid State Chemical Physics (Wiley, New York, 1976)
M.G. Martin, MCCCS Towhee: a tool for monte carlo molecular simulation. Mol. Simul. 39(14–15), 1212–1222 (2013)
B. Widom, Some topics in the theory of fluids. J. Chem. Phys. 39(11), 2808–2812 (1963)
H. Sha, R. Faller, A quantum chemistry study of curvature effects on boron nitride nanotubes/nanosheets for gas adsorption. Phys. Chem. Chem. Phys. 18, 19944–19949 (2016)
C.Y. Chen, H.X. Li, M.E. Davis, Studies on mesoporous materials: I. Synthesis and characterization of MCM-41. Microporous Mater. 2(1), 17–26 (1993)
L.Y. Chen, S. Jaenicke, G.K. Chuah, Thermal and hydrothermal stability of framework-substituted MCM-41 mesoporous materials. Microporous Mater. 12(4–6), 323–330 (1997)
J.T. Tompkins, R. Mokaya, Steam stable mesoporous silica MCM-41 stabilized by trace amounts of Al. ACS Appl. Mater. Interfaces 6(3), 1902–1908 (2014)
S. Plimpton, Fast parallel algorithms for short-range molecular dynamics. J. Comput. Phys. 117(1), 1–19 (1995)
S. Zhang, M. Perez-Page, K. Guan, E. Yu, J. Tringe, R.H.R. Castro, R. Faller, P. Stroeve, Response to extreme temperatures of mesoporous silica MCM-41: porous structure transformation simulation and modification of gas adsorption properties. Langmuir 32(44), 11422–11431 (2016)
S. Munetoh, T. Motooka, K. Moriguchi, A. Shintani, Interatomic potential for SiO systems using Tersoff parameterization. Comput. Mater. Sci. 39(2), 334–339 (2007)
J. Tersoff, New empirical approach for the structure and energy of covalent systems. Phys. Rev. B 37(12), 6991 (1988)
H. Kissinger, Reaction kinetics in differential thermal analysis. Anal. Chem. 29(11), 1702–1706 (1957)
S. Zumdahl, Chemistry, 5th edn. (Houghton Mifflin, Boston, MA, 2004)
M. Waldman, A. Hagler, New combining rules for rare gas van der waals parameters. J. Comput. Chem. 14(9), 1077–1084 (1993)
D.M. King, J.A. Spencer II, X. Liang, L.F. Hakim, A.W. Weimer, Atomic layer deposition on particles using a fluidized bed reactor with in situ mass spectrometry. Surf. Coat. Technol. 201(22–23), 9163–9171 (2007)
A. van Veen, R.J.M. Konings, A.V. Fedorov, Helium in inert matrix dispersion fuels. J. Nucl. Mater. 320(1–2), 77–84 (2003)
K.W. Lay, H.S. Rosenbaum, J.H. Davies, M.O. Marlowe, Nucl. Fuel. US Patent 4869866 A (1989)
Acknowledgements
This research was partially supported by the U.S. Department of Energy, Office of Nuclear Energy, Nuclear Energy University Program under Grant No. DE–NE0000704. Parts of this work were performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 The Minerals, Metals & Materials Society
About this paper
Cite this paper
Zhang, S. et al. (2019). Computational and Experimental Studies on Novel Materials for Fission Gas Capture. In: Jackson, J., Paraventi, D., Wright, M. (eds) Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-030-04639-2_65
Download citation
DOI: https://doi.org/10.1007/978-3-030-04639-2_65
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-04638-5
Online ISBN: 978-3-030-04639-2
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)