Abstract
This chapter presents the Nelder–Mead simplex method and the Broyden–Fletcher–Goldfarb–Shanno (BFGS) method for finite-element-model updating. The methods presented have been tested on a simple beam and an unsymmetrical H-shaped structure. It was noted that, on average, the Nelder–Mead simplex method gives more accurate results than did the BFGS method. This is mainly because the BFGS method requires the calculation of gradients, which is prone to numerical errors within the context of finite-element-model updating.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Allemang RJ (2003) The Modal Assurance Criterion – Twenty Years of Use and Abuse. Sound and Vib 37:14–21
Allemang RJ, Brown DL (1982) A Correlation Co-efficient for Modal Vector Analysis. In:Proc of the 1st Int Modal Anal Conf:01–18
Azizi SM, Fekri MZ, Yazdani D, Bakhshai (2005), A. A BFGS-Based Method for Designing a Decentralized LQ Controller for Industrial Robot Manipulators. In:Proc of the IEEE Conf on Control Appl: 1558–1562
Balmès E (1997) Structural Dynamics Toolbox User’s Manual. Sci Softw Group Sèvres Fr Ver 2.1
Bouhaddi N, Fillod R (1992) A Method for Selecting Master DOF in Dynamic Substructuring Using the Guyan Condensation Method. Comput & Struct 45: 941–946
Brechlin E, Bendel K, Keiper W (1998) New Scaled Modal Assurance Criterion for Eigenmodes Containing Rotational Degrees of Freedom. In: Proc of the 23rd Intl Conf on Vib Eng ISMA:465–471
Broyden CG (1970) The Convergence of a Class of Double-rank Minimization Algorithms. J of the Inst of Math and its Appl 6:76–90
Bürmen A, Puhan J, Tuma T (2006) Grid Restrained Nelder-Mead Algorithm. Comput Optim Appl 34:359–375
Bushard LB (1981) The Value of Guyan Reduction in Dynamic Thermal Problems. Comp & Struct 13:525–531
Caponero MA, Paolozzi A, Peroni I (2002) Use of Speckle Interferometry and Modal Assurance Criterion for Identification of Component Modes. Opt and Lasers in Eng 37:355–367
Coelho LdS, Araujo E (2009) Identification of the Hénon Chaotic Map by Fuzzy Modeling and Nelder-Mead Simplex Method Chaos. Solitons and Fractals 41:2762–2772
Corus M, Balmès E, Nicolas E (2006) Using Model Reduction and Data Expansion Techniques to Improve SDM. Mech Res Commun 35:398–407
Das AS, Dutt JK (2008) Reduced Model of a Rotor-Shaft System Using Modified SEREP. Mech Res Commun 35:398–407
Desforges MJ, Cooper JE, Wright JR (1996) Mode Tracking During Flutter Testing Using Modal Assurance Criterion. In Proc of the Inst of Mech Eng J of Aerosp Eng 210:27–37
Du N, Fan J, Wu H, Sun W (2009) Optimal Porosity Distribution of Fibrous Insulation. Intl J of Heat and Mass Transf 52:4350–4357
Ewins DJ (1995) Modal Testing: Theory and Practice. Research Studies Press, Letchworth
Ewins DJ (2001) Modal Testing: Theory, Practice and Application Mechanical Engineering Research Studies Engineering Dynamics Ser 2, Wiley
Fletcher RA (1970) New Approach to Variable Metric Algorithms. Compt J. 13:317–322
Friswell M I, Garvey SD, Penny JET (1995) Model Reduction Using Dynamic and Iterated IRS Techniques. J of Sound and Vib 186:311–323
Friswell M I, Garvey SD, Penny JET (1998) The Convergence of the Iterated IRS Method. J of Sound and Vib 211:123–132
Friswell MI, Mottershead JE (1995) Finite Element Model Updating in Structural Dynamics. Kluwer Academic Publishers Group, Norwell
Fu ZF, He J (2001) Modal Analysis. Butterworth-Heinemann Publishers, Oxford
Ghosal S, Chaki S (2009) Estimation and Optimization of Depth of Penetration in Hybrid CO2 LASER-MIG Welding using ANN-optimization Hybrid Model. Intl J of Adv Manuf Technol:01–9
Guyan RJ (1965) Reduction of Stiffness and Mass Matrices. AIAA J 3:380
Goldfarb DA (1970) Family of Variable Metric Updates Derived by Variational Means. Math of Comput 24:23–26
Häggblad RJ, Eriksson L (1993) Model Reduction Methods for Dynamic Analyses of Large Structures. Comput & Struct 47:735–749
Heylen W, Janter T (1989) Applications of the Modal Assurance Criterion in Dynamic Model Updating. Am Soc of Mech Eng, Des Eng Division DE 18:289–294
Jung DS, Kim CY (2009) FE Model Updating Based on Hybrid Genetic Algorithm and its Verification on Numerical Bridge Model. Struc Eng and Mech 32:667–683
Kalantar S, Zimmer UR (2009) Optima Localization by Vehicle Formations Imitating the Nelder-Mead Simplex Algorithm. Auton Robots:01–22
Kammer DC (2005) Sensor Set Expansion for Modal Vibration Testing. Mech Syst and Signal Process 19:700–713
Kammer DC, Peck JA (2008) Mass-weighting Methods for Sensor Placement Using Sensor Set Expansion Techniques. Mech Syst and Signal Process 22:1515–1525
Kim H, Cho M (2008) Sub-domain Reduction Method in Non-matched Interface Problems. J of Mech Sci and Technol 22:203-212
Lars R (1998) Modal Assurance Criteria Value for Two Orthogonal Modal Vectors. In: Proc of the Intl Modal Anal Conf – IMAC 2:1320–1325
Li H, Zhang M, Hu SJ (2008) Refinement of Reduced-models for Dynamic Systems. Prog in Nat Sci 18:993–997
Lieven NAJ, Ewins DJ (1988) Spatial Correlation of Mode Shapes the Coordinate Modal Assurance Criterion (COMAC). In Proc 6th Intl Modal Anal Conf:690–695
Luersen M, Riche RL (2004) Globalized Nelder-Mead Method for Engineering Optimization. Comput & Struct 82:2251–2260
Marwala T (1997) A Multiple Criterion Updating Method for Damage Detection on Structures. Master’s Thesis, University of Pretoria.
Mastorakis NE (2009) Solution of the Schrodinger-Maxwell Equations via Finite Elements and Genetic Algorithms with Nelder-Mead. WSEAS Trans on Math 8:169–176
McKinnon KIM (1998) Convergence of the Nelder-Mead Simplex Method to a Nonstationary Point. SIAM J Optim 9:148–158
Meo M, Zumpano G (2008) Damage Assessment on Plate-like Structures Using a Global-Local Optimization Approach. Optim and Eng 9:161–177
Nocedal J, Wright SJ (2006) Numerical Optimization.Springer-Verlag, Berlin
Noor AK (1981) Recent Advances in Reduction Methods for Nonlinear Problems. Comput & Struct 13:31–44
O’Callahan JC (1989) A Procedure for an Improved Reduced System (IRS) model. In: Proc of the 7th Intl Modal Anal Conf:29–37
O’Callahan JC, Avitabile P, Riemer R (1989) System Equivalent Reduction Expansion Process. In: Proc of the 7th Intl Modal Anal Conf:29–37
Olsson DM, Nelson LS (1975) The Nelder-Mead Simplex Procedure for Function Minimization. Technometrics 17:45–51
Ouria A, Toufigh MM (2009) Application of Nelder-Mead Simplex Method for Unconfined Seepage Problems. Appl Math Model 33:3589–3598
Papadimitriou DI, Giannakoglou KC (2009) The Continuous Direct-Adjoint Approach for Second Order Sensitivities in Viscous Aerodynamic Inverse Design Problems.Comput and Fluids 38:1539–1548
Paz M (1984) Dynamic Condensation. AIAA J 22:724–727
Paz M, Leigh W (2003) Structural Dynamics: Theory and Computation, Springer
Prakash BG, Prabhu MSS (1986) Reduction Techniques in Dynamic Substructures for Large Problems. Comput & Struct 22:539–552
Ransome TM (2006) Automatic Minimisation of Patient Setup Errors in Proton Beam Therapy. Master's Thesis, University of the Witwatersrand
Salvini P, Vivio F (2007) Dynamic Reduction Strategies to Extend Modal Analysis Approach at Higher Frequencies. Finite Elem in Anal and Des 43:931–940
Sastry CVS, Mahapatra DR, Gopalakrishnan S, Ramamurthy TS (2003) An Iterative System Equivalent Reduction Expansion Process for Extraction of High Frequency Response from Reduced Order Finite Element Model. Comput Methods in Appl Mech and Eng 192:1821–1840
Shanno DF (1970) Conditioning of Quasi-Newton Methods for Function Minimization. Math of Comput 24:647–656
Stetson KA (2008) Calculating Modal Assurance Criteria from Electronic Holography Data. Sound and Vib 42:06–11
Sun YW, Xu JT, Guo DM, Jia ZY (2009) A Unified Localization Approach for Machining Allowance Optimization of Complex Curved Surfaces. Precis Eng 33:516–523
Tan Z, Lim KM, Khoo BC (2009) An Immersed Interface Method for Stokes Flows with Fixed/Moving Interfaces and Rigid Boundaries. J of Comput Phys 228:6855–6881
Xia Y, Lin R (2004) Improvement on the Iterated IRS Method for Structural Eigensolutions. J of Sound and Vib 270:713–727
Xiao Y, Sun H, Wang Z (2009) A globally Convergent BFGS Method with Non-monotone Line Search for Non-convex Minimization. J of Comput and Appl Math 230:095–106
Yang QW (2009) Model Reduction by Neumann Series Expansion. Appl Math Modelling 33:4431–4434
Yin T, Lam HF, Chow HM, Zhu HP (2009) Dynamic Reduction-Based Structural Damage Detection of Transmission Tower Utilizing Ambient Vibration Data. Eng Struct 31:2009–2019
Yuan A, Dai H, Sun D (2009a) Optimal Sensor Placement of Cable-Stayed Bridge Using Mixed Algorithm Based on Effective Independence and Modal Assurance Criterion Methods. J of Vib, Measurement and Diagn 29:U466
Yuan G, Lu X, Wei Z (2009b) BFGS Trust-Region Method for Symmetric Nonlinear Equations. J of Comput and Appl Math 230:44–58
Zhao J, DeWolf JT (2007) Modeling and Damage Detection for Cracked I-shaped Steel Beams. Struct Eng and Mech 25:131–146
Zhao QH, Urosević D, Mladenović N, Hansen P (2009) A Restarted and Modified Simplex Search for Unconstrained Optimization. Comput and Oper Res 36:3263–3271
Zienkiewicz OC (1971) The Finite Element Method in Engineering Science. McGraw-Hill, London
Rights and permissions
Copyright information
© 2010 Springer-Verlag London Limited
About this chapter
Cite this chapter
(2010). Finite-element-model Updating Using Nelder–Mead Simplex and Newton Broyden–Fletcher–Goldfarb–Shanno Methods. In: Finite-element-model Updating Using Computional Intelligence Techniques. Springer, London. https://doi.org/10.1007/978-1-84996-323-7_2
Download citation
DOI: https://doi.org/10.1007/978-1-84996-323-7_2
Publisher Name: Springer, London
Print ISBN: 978-1-84996-322-0
Online ISBN: 978-1-84996-323-7
eBook Packages: EngineeringEngineering (R0)