Abstract
The use of composite materials for aerospace applications has markedly increased over the past two decades. Typically, a large percentage of composite aircraft components are fatigue and fracture critical, necessitating 100% inspection coverage. For composite materials, ultrasonic testing is the method of choice for detecting manufacturing defects which could lead to catastrophic failure during flight. As composite usage and part complexity increase, greater demands are placed on ultrasonic inspection systems. Projections of future composite usage (e.g. Joint Strike Fighter (JSF) program) show that the inspection workload may push current conventional automated ultrasonic inspection systems beyond practical limits. Conventional systems are typically slow, require significant setup time for highly contoured parts, and are generally inappropriate for in-service inspections where access is limited to a single side. Laser ultrasonic testing (Laser UT™) on the other hand offers many advantages over conventional automated ultrasonic systems: (1) the method is non-contact, requiring no couplants, (2) it can rapidly scan large areas, (3) it is able to inspect at angles far off normal, (4) it does not require expensive part fixtures, and (5) prior knowledge of the surface contour is not required. The optical scanning techniques used in make it capable of testing complex composite structures at speeds that cannot be matched by conventional mechanical scanning systems. These advantages in turn will reduce inspection costs and increase production throughput by as much as a factor of 10. Figure 1 illustrates the time savings of Laser UT™ over conventional UT as a function of part complexity.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
T. E. Drake, SAMPE, Vol. 39, 725, (1994).
T. E. Drake, “Preliminary Conceptual Design of a Laser Ultrasonic Inspection System”, General Dynamics IR&D Report ERR-FW-2444 (1984).
T. E. Drake, “Development of a Prototype Laser Ultrasonic Inspection System for Advanced Composites”, General Dynamics IR&D Report ERR-FW-2558 (1985).
F. H. Chang, T. E. Drake, M. A. Osterkamp, L. P. Monchalin, R. Heon, P. Bouchard, C. Padioleau, D. A. Froom, W. Frazier, and L. P. Barton, in Review of Progress in QNDE, Vol. 12, eds. D. O. Thompson and D. E. Chimenti (Plenum, New York, 1993), p.611.
T. E. Drake Jr., K. R. Yawn, and M. A. Osterkamp, in Eighth International Symposium on Nondestructive Characterization of Materials, Boulder, Colorado, June 15–20, 1997.
T. E. Drake Jr., K. R. Yawn, M. A. Osterkamp, and S. Y. Chuang, in Review of Progress in QNDE, Vol. 17, eds. D. O. Thompson and D. E. Chimenti (Plenum, New York, 1997), p.587.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1999 Springer Science+Business Media New York
About this chapter
Cite this chapter
Yawn, K.R. et al. (1999). Large-Scale Laser Ultrasonic Facility for Aerospace Applications. In: Thompson, D.O., Chimenti, D.E. (eds) Review of Progress in Quantitative Nondestructive Evaluation. Review of Progress in Quantitative Nondestructive Evaluation, vol 18 A. Springer, Boston, MA. https://doi.org/10.1007/978-1-4615-4791-4_48
Download citation
DOI: https://doi.org/10.1007/978-1-4615-4791-4_48
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4613-7170-0
Online ISBN: 978-1-4615-4791-4
eBook Packages: Springer Book Archive