Abstract
In this study the investigations on devising the convenient ON-LINE method for monitoring the sintering process during the equipment production by powder metallurgy procedure are presented. In the course of the experimental performance W-Ni-Fe compacts have been sintered at various temperature and the same time of sintering while the comparative analysis of the recorded acoustic emission signals at the observed samples has been performed.
The laboratory kit has been constructed and obtained results point out to the possibility of sintering process monitoring by recording acoustic emission signals and their correlation between physical mechanisms occurring in the very material during the process.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Purvis L. A.,Kannatey-Ashibu E., Pehlke R.D.: “Evaluation of Acoustic Emission from Sand Cast Aluminium Alloy 319 During Solidification and Formation of Casting Defects” — Department of Materials Science and Engineering Department of Mechanical, The University of Michigan Ann Arbor, Michigan, p. 31, 1990.
Mitraković D.: “Doctorial Dissertation” — Faculty of Technology and Metallurgy, Belgrade, p. 4–29, 1984., (in Serbian)
N. A. Bunina: “Issledovanie plastičeskoi deformacii matallov metodom akustičeskoi emissii” — Leningradskii inženerno-ekonomičeskii institut, Leningrad, p. 30–58, 1990.
C. R. Heiple and S.H. Carpenter: “Acoustic Emission Produced by the Delta-to-Alpha Phase Transformation in Pu-Ga Alloys”, Metallurgical Transactions A, Volume 23 A, March, p. 779–783, 1992.
Task M., Zaric D., et al.: “Studying of the Possibility of Acoustic Emission Application for Control and Monitoring of Crystallization of the Special Brass Type Alloys at Continuous Casting”, XXIV Conference on Production Mechanical Engineering of Yugoslavia, Novi Sad, Book of Proceedings, Volume II, p. 3. 45-3. 53, September 1992.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1999 Springer Science+Business Media New York
About this chapter
Cite this chapter
Tasić, M., Andić, Z., Bojović, D. (1999). Investigating Possibilities of Sintering Process Monitoring by Acoustic Emission as an On-Line Method. In: Stojanović, B.D., Skorokhod, V.V., Nikolić, M.V. (eds) Advanced Science and Technology of Sintering. Springer, Boston, MA. https://doi.org/10.1007/978-1-4419-8666-5_84
Download citation
DOI: https://doi.org/10.1007/978-1-4419-8666-5_84
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4613-4661-6
Online ISBN: 978-1-4419-8666-5
eBook Packages: Springer Book Archive