Abstract
This chapter discusses some fundamentals in the surface integrity of workpiece materials generated by grinding, including surface roughness, micro-structural changes and residual stresses induced by mechanical loading, thermal heating and phase transformation. The discussion concludes that different classes of materials have distinctive material removal mechanisms in grinding and hence have their individual surface integrity characteristics. The workpiece materials to discuss include metals, ceramics, semiconductors and composites.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Zhang LC, Suto T, Noguchi H, Waida T (1992) An overview of applied mechanics in grinding, Manufacturing Review, 5, 261–273.
Zarudi I, Zhang LC (2002) A revisit to some fundamental wheel-workpiece interaction problems in surface grinding, International Journal of Machine Tools and Manufacture, 42, 905–913.
Mahdi M, Zhang LC (1994) Correlation between grinding conditions and phase transformation of an alloy steel, in: Advanced Computational Methods in Heat Transfer III, edited by LC Wrobel, et al, Computational Mechanics Publications, Southampton, pp. 193–200.
Mahdi M, Zhang LC (1995) The finite element thermal analysis of grinding processes by ADINA, Computer & Structure, 56, 313–320.
Zhang LC, Mahdi M (1995) Applied mechanics in grinding, Part IV: the mechanism of grinding induced phase transformation, International Journal of Machine Tools and Manufacture, 35, 1397–1409.
Mahdi M, Zhang LC (1994) A theoretical investigation on the mechanically induced residual stresses due to surface grinding, in: Progress of Cutting and Grinding, Vol. III, edited by N Narutaki, et al, Japan Society for Precision Engineering, Osaka, pp. 484–487.
Mahdi M, Zhang LC (1997) Applied mechanics in grinding, Part V: thermal residual stresses, International Journal of Machine Tools and Manufacture, 37, 619–633.
Mahdi M, Zhang LC (1998) Applied mechanics in grinding, Part VI: residual stresses and surface hardening by coupled thermo-plasticity and phase transformation, International Journal of Machine Tools and Manufacture, 38, 1289–1340.
Mahdi M, Zhang LC (1998) Residual stresses in ground components: effect of thermo-mechanical deformation, Proceedings of the 4th International Conference on Progress of Cutting and Grinding, Japan Society for Precision Engineering, Urumqi and Turpan, China, 5–9 October 1998, pp. 447–452.
Mahdi M, Zhang, LC (1999) Applied mechanics in grinding, Part VII: residual stresses induced by the full coupling of mechanical deformation, thermal deformation and phase transformation, International Journal of Machine Tools and Manufacture, 39, 1285–1298.
Mahdi M, Zhang, LC (2000) A numerical algorithm for the full coupling of mechanical deformation, thermal deformation and phase transformation in surface grinding, Computational Mechanics, 26, 157–165.
Zhang LC (2007) Grind-hardening of steel surfaces: a focused review, International Journal of Abrasive Technology, 1, 3–36.
Zarudi I, Zhang LC (2002) Modelling the structure changes in quenchable steel subjected to grinding, Journal of Materials Science, 37, 4333–4341.
Zarudi I, Zhang LC (2002) Mechanical property improvement of quenchable steel by grinding, Journal of Materials Science, 37, 3935–3943.
Nguyen T, Zhang LC, Zarudi I (2007) Grinding-hardening with liquid nitrogen: mechanisms and technology, International Journal of Machine Tools and Manufacture, 47, 97–106.
Zarudi, I, Zhang, LC (1997) Subsurface structure change of silicon after ultra-precision grinding, in: Advances in Abrasive Technology, edited by LC Zhang and N Yasunaga, World Scientific, Singapore, pp. 33–38.
Suzuki H, Wajima N, Zahmaty MS, Kuriyagava T, Syoji K (1997) Precision grinding of a spherical surface accuracy improving by on-machine measurement, in: Advances in Abrasive Technology, edited by LC Zhang and N Yasunaga, World Scientific, Singapore, pp. 116–121.
Zarudi I, Zhang LC, Mai YW (1996) Subsurface damage in alumina induced by single-point scratching, Journal of Materials Science, 31, 905–914.
Zarudi I, Zhang LC, Cockayne D (1998) Subsurface structure of alumina associated with single-point scratching, Journal of Materials Science, 33, 1639–1654.
Komanduri R (1996) On material removal mechanisms in finishing of advanced ceramics and glasses, Annals of the CIRP, 45, 509–514.
Bifano TG, Dow TA, Scattergood RO (1991) Ductile-regime grinding: a new technology for machining brittle materials, Transactions of the ASME Journal of Engineering Materials and Technology, 113, 184–189.
Zarudi I, Zhang LC (2000) On the limit of surface integrity of alumina by ductile-mode grinding, Transactions of the ASME Journal of Engineering Materials and Technology, 122, 129–134.
Zhang LC (2001), Solid Mechanics for Engineers, Paragrave Macmillan, Basingstoke, England.
Hagan JT (1979) Micromechanics of crack nucleation during indentations, Journal of Materials Science, 14, 2975–2980.
Zhang LC (2009) Mechanics and modelling of machining polymer matrix composites reinforced by long fibers, Chapter 1, in: Machining of Composite Materials, edited by JP Davim, ISTE-Wiley, New York, pp. 1–38.
Pramanik A, Zhang LC, Arsecularatne JA (2008) Machining of metal matrix composites: effect of ceramic particles on residual stress, surface roughness and chip formation, International Journal of Machining Tools and Manufacture, 48, 1613–1625.
Koenig W, Wulf Ch, Grass P, Willerscheid H (1985) Machining of fiber reinforced plastics, Annals of the CIRP, 34, 537–548.
Tagliaferri V, Caprino G, Diterlizzi A (1990) Effect of drilling parameters on the finish and mechanical properties of GFRP composites, International Journal of Machine Tools and Manufacture, 30, 77–84.
Kaneeda T (1991) CFRP cutting mechanism, Transactions of the North American Manufacturing Research Institute of SME, 19, 216–221.
Bhatnagar N, Ramakrishnan N, Naik NK, Komanduri R (1995) On the machining of fiber reinforced plastic (FRP) composite laminates, International Journal of Machine Tools and Manufacture, 35, 701–716.
Caprino G, Tagliaferri V (1995) Damage development in drilling glass fiber reinforced plastics, International Journal of Machine Tools and Manufacture, 35, 817–829.
Wang DH, Ramulu M, Arola D (1995) Orthogonal cutting mechanisms of graphite/epoxy composite, Part I: unidirectional laminate, International Journal of Machine Tools and Manufacture, 35, 1623–1638.
Zhang HJ, Chen WY, Chen DC, Zhang LC (2001) Assessment of the exit defects in carbon fiber-reinforced plastic plates caused by drilling, Precision Machining of Advanced Materials, Key Engineering Materials, 196, 43–52.
Mahdi M, Zhang LC (2001) A finite element model for the orthogonal cutting of fiber-reinforced composite materials, Journal of Materials Processing Technology, 113, 373–377.
Inoue H, Kawaguchi I (1990) Study on the grinding mechanism of glass fiber reinforced plastics, Journal of Engineering Materials and Technology, 112, 341–345.
Park KY, Lee DG, Nakagawa T (1995) Mirror surface grinding characteristics and mechanism of carbon fiber reinforced plastics. Journal of Materials Processing Technology, 52, 386–398.
Hu NS, Zhang LC (2003) A study on the grindability of multidirectional carbon fiber-reinforced plastics, Journal of Materials Processing Technology, 140, 152–156.
Hu NS, Zhang LC (2004) Some observations in grinding unidirectional carbon fiber-reinforced plastics, Journal of Materials Processing Technology, 152, 333–338.
Wang J, Karihallo BL (1994) Cracked composite laminates least prone to delamination, Proceedings: Mathematical and Physical Sciences, 444 (No. 1920), 17–35.
Zhang LC, Zhang HJ, Wang XM (2001) A force prediction model for cutting unidirectional fiber-reinforced plastics, Machining Science and Technology, 5, 293–305.
Biddut A, Zhang LC, Ali YM, Liu Z (2008) Damage-free polishing of monocrystalline silicon wafers without chemical additives, Scripta Materialia, 59, 1178–1181.
Zarudi I, Zhang LC (1999) Structural changes in mono-crystalline silicon subjected to indentation – experimental findings, Tribology International, 32, 701–712.
Zarudi I, Zhang LC, Cheong WCD, Yu TX (2005) The difference of phase distributions in silicon after indentation with Berkovich and spherical indenters, Acta Materiala, 53, 4795–4800.
Zarudi I, Nguyen T, Zhang LC (2005) Effect of temperature and stress on plastic deformation in monocrystalline silicon induced by scratching, Applied Physics Letters, 86, 011922.
Chang L, Zhang LC (2009) Deformation mechanisms at pop-out in monocrystalline silicon under nanoindentation, Acta Materialia, 57, 2148–2153.
Biddut A, Yan JW, Zhang LC, Ohta T, Kuriyagawa T, Shaun B (2009) Deformation in mono-crystalline silicon caused by high speed single-point micro-cutting, Key Engineering Materials, 407–408, 347–350.
Zarudi I, Zhang LC (1998) Effect of ultra-precision grinding on the microstructural change in silicon monocrystals, Journal of Materials Processing Technology, 84, 148–158.
Zarudi I, Zhang LC (1996) Subsurface damage in single-crystal silicon due to grinding and polishing, Journal of Materials Science Letters, 15, 586–587.
Zhang LC, Zarudi I (1999) An understanding of the chemical effect on the nano-wear deformation in mono-crystalline silicon components, Wear, 225–229, 669–677.
Zhang LC, Zarudi I (2001) Towards a deeper understanding of plastic deformation in mono-crystalline silicon, International Journal of Mechanical Science, 43, 1985–1996.
Zhang LC (2008) Microstructural changes in silicon caused by indentation and machining, Chapter 4, in: Semiconductor Machining on the Micro-Nanoscale, edited by JW Yan and J Patten, Research Signpost, India, pp. 155–197.
Zhang LC (2006) Nano-characterisation of materials: silicon, copper, carbon nanotubes and diamond thin films, Chapter 8, in: Handbook of Theoretical and Computational Nanotechnology, Volume 8: Functional Nanomaterials, Nanoparticles, and Polymer Design, edited by M Rieth and W Schommers, American Scientific Publishers, Stevenson Ranch, CA, USA, pp. 395–456.
Zhang LC, Tanaka H (1999) On the mechanics and physics in the nano-indentation of silicon mono-crystals, JSME International Journal, Series A: Solid Mechanics & Material Engineering, 42, 546–559.
Zhang LC, Tanaka H (1998) Atomic scale deformation in silicon monocrystals induced by two-body and three-body contact sliding, Tribology International, 31, 425–433.
Vodenitcharova T, Zhang LC (2003) A mechanics prediction of the behaviour of mono-crystalline silicon under nano-indentation, International Journal of Solids and Structures, 40, 2989–2998.
Vodenitcharova T, Zhang LC (2004) A new constitutive model for the phase transformations in mono-crystalline silicon, International Journal of Solids and Structures, 41, 5411–5424.
Zarudi I, Cheong WCD, Zou J, Zhang LC (2004) Atomistic structure of monocrystalline silicon in surface nano-modification, Nanotechnology, 15, 104–107.
Zarudi I, Zhang LC, Zou J, Vodenitcharova T (2004) The R8-BC8 phases and crystal growth in monocrystalline silicon under microindentation with a spherical indenter, Journal of Materials Research, 19, 332–337.
Zarudi I, Zou J, McBride W, Zhang LC (2004) Amorphous structures induced in monocrystalline silicon by mechanical loading, Applied Physics Letters, 85, 932–934.
Zarudi I, Zhang LC, Swain MV (2003) Microstructure evolution in monocrystalline silicon in cyclic microindentation, Journal of Materials Research, 18, 758–761.
Zhang LC, Suto T, Noguchi H, Waida T (1993) Applied mechanics in grinding, Part II: modelling of elastic modulus of wheels and interface forces, International Journal of Machine Tools and Manufacture, 33, 245–255.
Lu G, Zhang LC (1994) Further remarks on the modelling of elastic modulus of grinding wheels, International Journal of Machine Tools and Manufacture, 34, 841–846.
Zhang LC, Suto T, Noguchi H, Waida T (1993) Applied mechanics in grinding, Part III: a new formula for contact length prediction and a comparison of available models, International Journal of Machine Tools and Manufacture, 33, 587–597.
Zhang LC, Suto T, Noguchi H, Waida T (1995) A study of creep-feed grinding of metallic and ceramic materials, Journal of Materials Processing Technology, 48, 267–274.
Acknowledgments
The continuous support of Australian Research Council to this work is appreciated.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2011 Springer US
About this chapter
Cite this chapter
Zhang, L.C. (2011). Surface Integrity of Materials Induced by Grinding. In: Jackson, M., Davim, J. (eds) Machining with Abrasives. Springer, Boston, MA. https://doi.org/10.1007/978-1-4419-7302-3_5
Download citation
DOI: https://doi.org/10.1007/978-1-4419-7302-3_5
Published:
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4419-7301-6
Online ISBN: 978-1-4419-7302-3
eBook Packages: EngineeringEngineering (R0)