Abstract
Energy conversion technologies using chemical reaction are introduced. Thermal energy conversion by chemical heat pumps and a hydrogen production system is shown mainly as efficient energy utilization technology utilizing chemical reaction ability. Chemical reaction would be useful for thermal energy management, because heat density of chemical changes is relatively higher than one of physical changes, which are used in conventional conversion system. Then, reversible chemical reaction is expected to have potential for thermal energy conversion, storage and utilization process in the next generation. The know-how of development of energy conversion system utilizing reversible chemical reactions is explained using chemical reaction equilibrium analysis. Chemical heat pump for thermal energy storage and conversion, and hydrogen production utilizing separation process are reviewed as practical example. Possibility of chemical energy conversion methodology would be understood from this section.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Wettermark, G., et al., 1979. Storage of heat–A survey of efforts and possibilities, Swedish Council for Building Research.
Taube, M., et al., 1980. Opportunities and limitations for the use of ammoniated salts as a carrier for thermochemical energy storage, Int. Seminar on Thermochemical Energy Storage, Stockholm, pp. 349–369.
DOE Report, 1981. Chemical heat pump cost-effectiveness Evaluation, BNL-51484, DE82-008858.
Ervin, G. 1977. Solar heat storage using chemical reactions, J. Solid State Chem., 22, 51–61.
Kanzawa, A., Y. Arai, 1981. Thermal energy storage by the chemical reaction (Augmentation of heat transfer and thermal decomposition in the CaO/Ca(OH)2 powder), Solar Energy, 289–294.
Prevost, M., and R. Bugarel, 1981. Theoretical and technical aspects of a chemical heat pump: Secondary alcohol–ketone–hydrogen system, Proc. 2nd World Cong. Chem. Eng., 2, 585–590.
Kato, Y., and H. Kameyama, 1986. Study of Catalyst-Assisted Chemical Heat Pump with Reaction Couple of Acetone Hydrogenation and 2-Propnanol Dehydrogenation, Proc. of World Congress III of Chemical Engineering, I, Tokyo, pp. 676–679.
Shinji, O., et al., 1982. The dehydrogenation of cyclohexane by the use of a porous-glass reactor, Bull. Chem. Soc., Japan, 55, 2760–64.
Hanneman, R.E., et al., 1974. Closed loop chemical system for energy transmission, conversion and storage, Proc. Intersoc. Energy Conversion Eng. Conf., pp. 435–441.
The New Energy and Industrial Technology Development Organization (NEDO), 1993. Final Report for the Project of Super-Heat Pump and Energy Integrated System, September 1993 (in Japanese).
Ogura, H., et al., 1991. Thermal conductivity analysis of packed bed reactor with heat transfer fin for Ca(OH)2/CaO chemical heat pump, Kagaku-kogaku Ronbunsyu, 17 (9), 916–923.
Kato, Y., J. Nakahata, and Y. Yoshizawa, 1999. Durability characteristics of the hydration of magnesium oxide under repetitive reaction, J. Mater. Sci., 34, 475–480.
Kato, Y., D. Saku, N. Harada, and Y. Yoshizawa, 1997. Utilization of high temperature heat using a calcium oxide/lead oxide/carbon dioxide chemical heat pump, J. Chem. Eng. Japan, 30 (10), 1013–1019.
Crozat, G., et al., 1988. Systemes de gestion de L’energie thermique bases sur des reaction solid-gaz, Pompes Chaleur Chimiques de Hautes Perfomances, 2 (9), 310–319.
Tamainot-Telto, Z., and R.E. Critoph, 2001. Monolithic carbon for sorption refrigeration and heat pump applications, Appl. Thermal Eng., 21 (6), 37–52.
Fujioka, K., et al., 1998. Measurement of effective thermal conductivity of CaCl2 reactor beds used for driving chemical heat pumps, J. Chem. Eng. Japan, 31, 266–272.
Kato, Y., and C. L. Pritchard, 2000. Energy performance analysis of isobutene/water/tert-butanol chemical heat pump, Trans. IChemE, 78 (2), 184–191.
Selvidge, M., and I.N. Miaoulis, 1990. evaluation of reversible hydration reactions for use in thermal energy storage,. Solar Energy, 44 (8), 173–178.
Alefeld, G., P. Maier-Laxhuber, and M. Rothmeyer, 1981. Thermochemical heat storage and heat transformation with zeolites as adsorbents, In Proceedings of the IEA Conference on New Energy Conservation Technologies and their Commercialization, 6–10 April 1981, Vol. 1, J.P. Millhone & E.H. Willis, Springer Verlag, Berlin, pp. 796–819.
Close, D.J., and T.L. Pryor, 1976. The behavior of adsorbent energy storage beds. Solar Energy, 18, 287–292.
Close, D.J., and R.V. Dunkle, 1977. Use of adsorbent beds for energy storage in drying of heating systems, Solar Energy, 19, 233–238.
Pryor, T.L., and D.J. Close, 1978. Measurements of the behavior of adsorbent energy storage beds, Solar Energy, 20, 151–155.
Gopal, R., B.R. Hollebone, C.H. Langford and R.A. Shigeishi, 1982. The rates of solar energy storage and retrieval in a zeolite water system, Solar Energy, 28, 421–424.
Kato, Y., 2001. Heat Storage Technologies, Vol. 2, Latent and Chemical Heat Storages, edited by N. Hasatani and A. Kanzawa (Shinzan-sya, Tokyo, 2001), pp. 135–153 (in Japanese).
Kato, Y., 2000. Low exergy reactor for decentralized energy utilization, Progress in Nuclear Energy, 37 (1–4), 405–410.
Kato, Y., Y. Sasaki, and Y. Yoshizawa, 2005. Magnesium oxide/water chemical heat pump to enhance energy utilization of a cogeneration system, Energy, 30 (11–12), 2144–2155.
Kato, Y., D. Saku, N. Harada, and Y. Yoshizawa, 1997. Utilization of high temperature heat using a calcium oxide/lead oxide/carbon dioxide chemical heat pump, J. Chem. Eng. Japan, 30 (10), 1013–1019.
Kato, Y., C.L. Pritchard, 2000. Energy performance analysis of isobutene/water/tert-butanol chemical heat pump, Trans IChemE, 78 (Part A), 184–191.
Kato, Y., K. Ando, and, Y. Yoshizawa, 2003. Study on a regenerative fuel reformer for a zero-emission vehicle system, J. Chem. Eng. Japan, 36 (11), 860–866.
Williams, R., 1933. Hydrogen Production, U.S. Patent 1,938,202.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2007 Springer
About this paper
Cite this paper
Kato, Y. (2007). CHEMICAL ENERGY CONVERSION TECHNOLOGIES FOR EFFICIENT ENERGY USE. In: Paksoy, H.Ö. (eds) Thermal Energy Storage for Sustainable Energy Consumption. NATO Science Series, vol 234. Springer, Dordrecht. https://doi.org/10.1007/978-1-4020-5290-3_23
Download citation
DOI: https://doi.org/10.1007/978-1-4020-5290-3_23
Publisher Name: Springer, Dordrecht
Print ISBN: 978-1-4020-5288-0
Online ISBN: 978-1-4020-5290-3
eBook Packages: EngineeringEngineering (R0)