Abstract
A theoretical approach is presented for the analysis of the direct drawing of square section rod with various corner radii from round bar. In the past a theoretical approach to this operation has rarely been attempted.
The mechanics of the cold drawing of the square rod have been examined by an upper bound approach which enables the calculation of the drawing force from the known geometry of the die and the mechanical characteristics of the workpiece.
This calculation must be considered as the first step towards a CAD/CAM of sectional drawing of more complicated shapes.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
B.B. Basily, D.H. Sansome, (1976) Some theoretical considerations for the direct drawing of section rod from round bar, Int. J, mech.Sci., 18 p. 201.
B. Avitzur (1968), Metal Forming:Processes and Analysis McGraw-Hill, New York.
W.Johnson, P.B. Mellor (1973), Engineering Plasticity Van Nostrand Reinhold, London.
J.G. Wistreich (1955), “Investigation of the Mechanics of Wire drawing”, Proc.Inst.Mech.Engrs. (London),169,P. 659.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Copyright information
© 1980 The Department of Mechanical Engineering, University of Birmingham
About this chapter
Cite this chapter
Boer, C.R., Schneider, W.R., Eliasson, B., Avitzur, B. (1980). An Upper Bound Approach for the Direct Drawing of Square Section Rod from Round Bar. In: Tobias, S.A. (eds) Proceedings of the Twentieth International Machine Tool Design and Research Conference. Palgrave Macmillan, London. https://doi.org/10.1007/978-1-349-05172-4_17
Download citation
DOI: https://doi.org/10.1007/978-1-349-05172-4_17
Publisher Name: Palgrave Macmillan, London
Print ISBN: 978-1-349-05174-8
Online ISBN: 978-1-349-05172-4
eBook Packages: Springer Book Archive