Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
MacKellar, S. and Pearson, D. “Nationally Agreed Failure Data and Analysis Methodology for Water Mains Volume 1: Overview and Findings,” Report Ref. No. 03/RG/05/7, UK Water Industry Research, London, UK, 2003.
Marshall, G.P., Pearson, D., and MacKellar, S., “Specification of Performance for Modified and Polyethylene Pipes,” Plast. Rubber Compos. Process. Appl., 25 (6), 276-286 (1996).
Andersson, U., Proc. of the 11th International Conference on Plastics Pipes, Munich, Germany, Plastics and Rubber Institute, 2001.
Williams, J.G., “Applications of Linear Fracture Mechanics,” Adv. Polym. Sci., 27, 67-120 (1978).
Lu, J.P., Davis, P., and Burn, L.S., “Lifetime Predictions for ABS Pipes Subjected to Combined Pressure and Deflection Loading,” Polym. Eng. Sci., 43, 444 (2003).
Marshall, G.P., “Design for Toughness in Polymers: 1—Fracture Mechanics,” Plast. Rubber Compos. Process. Appl., 2 (2), 169-182 (1982).
Burn, S., Davis, P., Schiller, T., Tiganis, B., Tjandraatmadja, G., Cardy, M., Gould, S., Sadler, P., and Whittle A.J., Long Term Performance Prediction of PVC Pipes, AwwaRF Project No. 2879, 2005.
Davis, P., Burn, L.S., and Whittle, A.J., “Investigating Crack Growth and Plasticity in the C-Ring Fracture Toughness Test,” Proc. Plastics Pipes XI, Munich, Germany, IOM Communications, September 2001.
Rooke, D.P. and Cartwright, D.J., Compendium of Stress Intensity Factors, London, UK, 1976.
ISO/DIS 11673.2, Determination of the Fracture Toughness Properties of Un-plasticized Poly(Vinyl (PVC-U) Pipes}, International Organization for Standardization, Geneva, Switzerland, 1999.
Burn, L.S., “Lifetime Prediction of uPVC Pipes—Experimental and Theoretical Comparisons,” Plast. Rubber Compos. Process. Appl., 21 (2), 99-108 (1994).
Marshall, G.P., Brogden, S., and Shepherd, M.A., “Evaluation of the Surge and Fatigue Resistance of PVC and PE Pipeline Materials for Use in the U.K. Water Industry,” Proc. Plastics Pipes X Conference, Gothenburg, Sweden, IOM Communications, September 1998.
Williams, J.G., Introduction to Elastic Plastic Fracture Mechanics, ESIS-TC4 Polymers and Composites, Cambridge, UK, 2000.
Kumar, V., German, M.D., and Shih, C.F., “An Engineering Approach for Elastic Plastic Fracture Analysis,” EPRI Report NP-1931, 1981.
Bernal, C., Lopez Montenegro, H., and Frontini, P., “Failure Prediction Analysis for Polyethylene Flawed Pipes,” Eng. Fract. Mech., 70, 2149 (2003).
Atkins, A.G. and Mai, Y.W., Elastic and Plastic Fracture, Ellis Horwood, Chichester, UK, 1988.
Hale, G.E. and Ramsteiner, F., J-Fracture Toughness of Polymers at Slow Speed, ESIS-TC4 Polymers and Composites, Cambridge, UK, 2000.
Sehanobish, K., Moet, A., Chudnovsky, A., and Petro, P.P., “Fractographic Analysis of Field Failure in Polyethylene Pipe,” J. Mater. Sci. Lett., 4, 890-894 (1985).
Kanninen, M.F., O’Donoghue, P.E., Popelar, C.H., and Kenner, V.H., “A Visco-Elastic Fracture Mechanics Assessment of Slow Crack Growth in Polyethylene Gas Distribution Pipe Materials,” Eng. Fract. Mech., 36 (6), 903-918 (1990).
Pandya, K.C. and Williams, J.G., “Measurement of Cohesive Zone Parameters in Tough Polyethylene,” Polym. Eng. Sci., 40, 1765 (2000).
Duan, D. and Williams, J.G., “Craze Testing for Tough Polyethylene,” J. Mat. Sci., 3, 635 (1998).
Schulte, C.A., in ASTM STP060, American Society for Teting & Materials, Philadelphia, PA, 1960.
Davis, P., Burn, S., and Gould S., Long Term Performance Prediction of PE Pipes, AwwaRF Project No. 2879, 2007.
Broberg, K.B., “Influence Of T-Stress, Cohesive Strength, and Yield Strength on the Competition between Decohesion and Plastic Flow in a Crack Edge Vicinity,” Int. J. Fract., 4, 11 (1999).
Wang, X., “Elastic T-Stress for Cracks in Test Specimens Subjected to Non-Uniform Stress Distributions,” Eng. Fract. Mech., 69, 1339 (2002).
Wang, X. and Bell, R., “Elastic T-Stress Solutions for Semi-Elliptical Surface Cracks in Finite Thickness Plates Subject to Non-Uniform Stress Distributions,” Eng. Fract. Mech., 71, 1477 (2004).
Davis, P., Burn, S., Moglia, M., and Gould, S., “A Physical Probabilistic Model to Predict Failure Rates in Buried PVC Pipelines,” Reliability Eng. System Safety, 92, 1258-1266 (2007).
Chudnovsky, A., Baron, D., and Schulkin, Y., “Lifetime Prediction and Reliability Evaluation for Gas Piping Grade Polyethylene,” Proc. 14th Intern. Plastic Fuel Gas Pipe Symposium, San Diego, CA, American Gas Association, p. 190-196, 1995.
Barker, M.B., Bowman, J., and Bevis, M., “The Performance and Causes of Failure of Polyethylene Pipes Subjected to Constant and Fluctuating Internal Pressures,” J. Mater. Sci., 18, 1095-1118 (1983).
PVC Pipes and Fittings for Pressure Applications, AS/NZS 1477, Standards Australia/Standards New Zealand, 1999.
Polyethylene (PE) Pipes for Pressure Pipes and Fittings,AS/NZS 4130, Standards Australia/Standards New Zealand, 2003.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2009 Springer Science+Business Media, LLC
About this paper
Cite this paper
Burn, S., Davis, P., Gould, S. (2009). Risk Analysis for Pipeline Assets—The Use of Models for Failure Prediction in Plastics Pipelines. In: Martin, J.W., Ryntz, R.A., Chin, J., Dickie, R.A. (eds) Service Life Prediction of Polymeric Materials. Springer, Boston, MA. https://doi.org/10.1007/978-0-387-84876-1_12
Download citation
DOI: https://doi.org/10.1007/978-0-387-84876-1_12
Publisher Name: Springer, Boston, MA
Print ISBN: 978-0-387-84875-4
Online ISBN: 978-0-387-84876-1
eBook Packages: EngineeringEngineering (R0)