In general, the process flow for lead-free surface mount assembly process is similar to the conventional SnPb soldering process. Often the same equipment set used for SnPb can be used for lead-free reflow soldering. However, there are some differences that must be taken into account. The material set used for lead-free soldering is different and typically higher reflow temperatures are required. This chapter will review the different aspects of the discuss its impact on design, equipment, process and materials. surface mount assembly process with respect to lead-free solder and
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
IPC-7525 2000 Stencil Design Guidelines. IPC, Bannockburn, Illinois
IPC-A-610D 2005 Acceptability of Electronic Assemblies. IPC, Bannock-burn, Illinois
IPC Round Robin Testing and Analysis of Lead Free Solder Pastes with Alloys of Tin, Silver and Copper. IPC Solder Products Value Council, Bannockburn, Illinois
IPC/JEDEC J-STD-020C 2004 Moisture/Reflow Sensitivity Classification for Nonhermetic Solid State Surface Mount Devices. JEDEC Solid State Technology Association, Arlington, Virginia
IPC/JEDEC J-STD-033B 2005 Handling, Packing, Shipping and Use of Moisture/Reflow Sensitive Surface Mount Devices. JEDEC Solid State Technology Association, Arlington, Virginia
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2007 Springer Science+Business Media, LLC
About this chapter
Cite this chapter
Sethuraman, S. (2007). Lead-Free Surface Mount Assembly. In: Bath, J. (eds) Lead-Free Soldering. Springer, Boston, MA. https://doi.org/10.1007/978-0-387-68422-2_3
Download citation
DOI: https://doi.org/10.1007/978-0-387-68422-2_3
Publisher Name: Springer, Boston, MA
Print ISBN: 978-0-387-32466-1
Online ISBN: 978-0-387-68422-2
eBook Packages: EngineeringEngineering (R0)