Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
J. T. Krause, D. Stroumbakis: ‘Factors affecting arc fusion splice strengths.’ In: Optical Network Engineering and Integrity at Philadelphia, PA, October 24–25, 1995, ed. by H. H. Yuce, D. K. Paul, R. A. Greenwell (SPIE, Bellingham, WA 1996) pp. 98–109
W. W. Wood: ‘Reliability of Optical Connectors and Splices’. In: Fiber Optics Reliability and Testing: Benign and Adverse Environments, SPIE Vol. 2074, at Boston, MA September 8–10, 1993, ed. by D. K. Paul, H. H. Yuce (SPIE, Bellingham, WA, 1994) pp. 276–286
J. J. Refi: Fiber Optic Cable-A Lightguide, 2nd edn. (AVO Training Institute, 2001)
O. S. Gebizlioglu, J. D. Mann, C. R. Kurkjian: ‘An Overview of Optical Fiber Strippability’. In 15th National Fiber Optic Engineers Conference (NFOEC), September 1999 (Telcordia, Piscataway, NJ 1999)
S. Siddiqui, L. R. Pritchett, J. R. Szwec, C. R. Taylor, R. J. Brown, Jr., H. C. Chandan: ‘A New Chemical Stripping Method for Obtaining High Strength Splices of UV Colored Optical Fibers’. In: Proceedings of the 47th International Wire and Cable Symposium at Philadelphia, PA November 16–19, 1998, (IWCS, Eatontown, NJ 1998) pp. 864–873
B. Chomycz: Fiber Optic Installer’s Manual, (McGraw-Hill, New York, 2000)
J. Hecht: Understanding Fiber Optics, (Prentice Hall, Upper Saddle River, NJ 2002)
N. Yoshizawa, H. Tada, Y. Katsuyama: IEEE J. Lightwave Technol. 9, 417 (1991)
T. Mizushima, S. Morita, H. Sugawara, T. Sato, S. Yaguchi: ‘Development of a Mass Fusion Splicing System for up to 24-Fiber Ribbon’. In: Proceedings of the 51st International Wire and Cable Symposium (IWCS) at Lake Buena Vista, FL, November 18–21, 2002 (IWCS, Eatontown, NJ, 2002) pp. 708–714
M. J. Matthewson, C. R. Kurkjian, J. R. Hamblin: IEEE J. Lightwave Technol. 15, 490 (1997)
C. E. Walraven, R. G. Wiley: ‘Method for Heat Stripping Optical Fibers’. US Patent 5968283 (1999)
J. T. Krause, C. R. Kurkjian: Electron. Lett. 21, 533 (1985)
H.-S. Park, S. Lee, C. S. Kim, J. H. Kim, U.-C. Paek, Y. Chung: ‘A novel method of removing optical fiber coating with hot air stream.’ In: Optical Fiber Communication Conference (OFC) and International Conference on Integrated Optics and Optical Fiber Communications (IOOC) at San Diego, CA, February 21–26, 1999, (Optical Society of America, Washington, DC, 1999) pp. 371–373
Datasheet for ‘Autoprep’. 3SAE Corporation (2002) available from http://www.3sae.com
C. J. Vetrano: ‘Method and Apparatus for Stripping an Optical Fiber’, US Patent 6402856 (2002)
H.-S. Park, S. Lee, U.-C. Paek, Y. Chung: IEICE Trans. Commun. E85-B, 206 (2002)
Datasheet for ‘TVV-50 Decoater’. Vytran Corporation (Morganville NJ, 2002) available from http://www.vytran.com
R. F. Swain, A. D. Yablon: ‘Method and apparatus for removing polymeric coatings from optical fiber’, US Patent 6436198 (2002)
B. F. Johnston, A. J. Lee, M. J. Withford, J. A. Piper: Opt. Express 10, 818 (2002)
F. Barnier, P. E. Dyer, P. Monk, H. V. Snelling, H. Rourke: J. Phys. D: Appl. Phys. 33, 757 (2000)
G. Ogura: Laser Focus World 37, No. 6, 169 (2001)
D. Gloge, P.W. Smith, D. L. Bisbee, E. L. Chinnock: Bell Syst. Tech. J. 52, 1579 (1973)
J. G. Woods: ‘Cleaving of Optical Fibers’. In: Components for Fiber Optic Applications at Cambridge, MA, September 22–24, 1986, (SPIE vol 722, Bellingham, WA, 1986) pp. 147–152
J. E. Field, B. Samuels, D. Townsend, J. T. Hagan: Phil. Mag. A 57, 151 (1988)
S. T. Gulati: ‘Mechanical Properties of SiO2 vs. SiO2-TiO2 Bulk Glasses and Fibers’. In: Optical Waveguide Materials: Symposium at Boston, MA, December 2–4, 1991, ed. by M. M. Broer (Materials Research Society, Pittsburgh, PA 1992) pp. 67–84
J. C. Meyer: ‘Cleavability of Titania-Clad Optical Fiber’. In: Proceedings of the 48th International Wire and Cable Symposium (IWCS) at Atlantic City, NJ November 15–18, 1999, (IWCS, Eatontown, NJ, 1999) pp. 636–643
Y. Ohuchi, A. Wada, R. Yamauchi, N. Sato, K. Inada: ‘Abrasion resistant optical fibers with mechanically induced compressive surface stress’. In: Optical Fiber Communications Conference at San Francisco, CA, January 22–26, 1990, ed. by R. A. Linke, A. J. Morrow, D. M. Fye, R. E. Wagner (Optical Society of America, Washington, DC 1990) p. 172
‘Inspection of Cleaved Fiber End Faces by Interferometry’. EIA-455-179, also known as FOTP-179, (EIA, Washington, DC 1988) available from http://www.tiaonline.com
S. H. Crandall, N. C. Dahl, T. J. Lardner: An Introduction to the Mechanics of Solids, 2nd edn. (McGraw-Hill, New York 1978)
M. J. Saunders: Appl. Opt. 18, 1480 (1979)
V. Shah, G. Kiss, W. C. Young: ‘Sensitivity of Insertion Loss on Fiber Endface Angles in Single-Mode Fiber Splices’. In: 10th National Fiber Optic Engineers Conference (NFOEC) Vol. 3, at San Diego, June 13–16, 1994, (Telcordia, Piscataway NJ, 1994) pp. 407–417
International Telecommunication Union (ITU) ‘Series L: Construction, Installation and Protection of Cables and Other Elements of Outside Plant: Optical fibre joints’. Recommendation L.12 (ITU, 2000) available from http://www.itu.int
T. Haibara, M. Matsumoto, T. Tanifuji, M. Tokuda: Opt. Lett. 8, 235 (1983)
O. Kawata, K. Hoshino, K. Ishihara: Electron. Lett. 19, 1049 (1983)
O. Kawata, K. Hoshino, Y. Miyajima, M. Ohnishi, K. Ishihara: IEEE J. Lightwave Technol. LT-2, 185 (1984)
T. Katagiri, M. Tachikura, I. Sankawa: IEEE J. Lightwave Technol. LT-3, 277 (1984)
J. T. Krause, W. A. Reed, K. L. Walker: IEEE J. Lightwave Technol. LT-4, 837 (1986)
H. Y. Tam: Electron. Lett. 27, 1957 (1991)
C. M. De Blok, P. Matthijsse: Electron. Lett. 20, 109 (1984)
E.-G. Neumann: Single-Mode Fibers: Fundamentals (Springer-Verlag, Berlin, 1988)
G.-D. Khoe, J. A. Luijendijk, L. J. C. Vroomen: IEEE J. Lightwave Technol. LT-4, 1219 (1986)
V. C. Y. So, R. P. Hughes, J. B. Lamont, P. J. Vella: IEEE J. Lightwave Technol. LT-5, 1663 (1987)
R. Watson: ‘Characterization of splice loss estimation accuracy using local injection/detection and profile alignment methods.’ In: 13th National Fiber Optic Engineers Conference (NFOEC) at San Dieo, CA, September 22–23, 1997, (Telcordia, Piscataway NJ, 1997) pp. 149–155
Rights and permissions
Copyright information
© 2005 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
(2005). Fiber Preparation and Alignment. In: Optical Fiber Fusion Splicing. Springer Series in Optical Sciences, vol 103. Springer, Berlin, Heidelberg. https://doi.org/10.1007/3-540-26539-2_2
Download citation
DOI: https://doi.org/10.1007/3-540-26539-2_2
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-23104-2
Online ISBN: 978-3-540-26539-9
eBook Packages: Physics and AstronomyPhysics and Astronomy (R0)