Abstract
The laser vaporization controlled condensation (LVCC) technique coupled with a differential mobility analyzer (DMA) is used to synthesize size-selected alloy nanoparticles and nanoparticle catalyst systems. The formation of Au–Ag alloy nanoparticles is concluded from the observation of only one plasmon band. The maximum of the plasmon absorption is found to vary linearly with the gold mole fraction. For the Au–Pd system, the XRD data confirms the formation of the alloy nanoparticles with no evidence of any of the pure components. The Au/CeO2 nanoparticle catalyst prepared by the LVCC method is a promising catalyst for low temperature CO oxidation due to its high activity and stability.
Similar content being viewed by others
References
Abdelsayed V. (2004) “Experimental Studies on Nucleation, Nanoparticles′ Formation and Polymerization from the Vapor Phase”. Virginia Commonwealth University, Richmond, VA 23284, Ph.D. Dissertation
Bond G.C. (2001). Gold: A relatively new catalyst. Gold Bulletin 34: 117–119
Chen D.-H. and Chen C.J. (2002).Formation of characterization of Au-Ag bimetallic nanoparticles in water-in-oil microemulsions. J. Materials Chemistry 12: 1557–1562
Costello C.K.,Yang J.H., Law H.Y.,Wang Y., Lin J.N., Marks L.D., Kung M.C. and Kung H.H. (2003). On the potential role of hydroxyl groups in CO oxidation over Au/Al2 O 3. Appl. Catal. A 243: 15–24
Date M. and Haruta M. (2001). Moisture effect on CO oxidation over Au/TiO2 catalyst J. Catal. 201: 221–224
Edelstein A.S. and Cammarata R.C. (eds) (1996). “Nanomaterials: Synthesis, Properties and Applications”. Institute of Physics: Bristol, Philadelphia
El-Shall M.S., Abdelsayed V., Pithawalla Y.B., Alsharaeh E. and Deevi S.C.(2003). Vapor phase growth and assembly of metallic, intermetallic, carbon, and silicon nanoparticles filaments. J. Phys. Chem. B 107: 2882–2886
El-Shall M. S., Li S., Graiver D. and Pernisz U. (1996).“Synthesis of nanostructured materials using a laser vaporization-condensation technique”. In: Chow G. and Gonsalves K.E. (eds) "Nanotechnology: Molecularly Designed Nanostructural Materials". ACS Symposium Series, Washington, D.C.
El-Shall M.S., Slack W., Vann W., Kane D. and Hanley D. (1994). Synthesis of nanoscale metal oxide particles using laser vaporization/condensation in a diffusion cloud chamber J. Phys. Chem. 98: 3067–70
Fernandez-Garcia M., Martinez-Arias A., Salamanca L.N., Coronado J.M., Anderson J.A.,Conesa J.C. and Soria J. (1999). Influences of ceria on Pd activity for the CO +O 2 reaction. J. Catal. 187: 474–485
Ferrandon M., Ferrand B., Bjoernbom E., Klingstedt F., Neyestanaki A.K., Karhu H. and Vaeyrynen I.J.(2001). Copper oxide -platinum/ alumina catalysts for volatile organic compound and carbon monoxide oxidation: Synergetic effect of cerium and lanthanum. J. Catal. 202: 354–366
Fu Q., Weber A. and Flytzani-Stephanopoulos M. (2001). Nanostructured of Au-CeO2 catalysts for low-temperature water-gas shift Catal. Lett. 77: 87–95
German R.M. (1996) Powder Metallurgy Science, Metal Powder Industries Federation, 2nd edition, pp 49–56.
Hadjipanayis G.C. and Siegel R.W.(eds) (1994) “Nanophase Materials Synthesis-Properties-Applications”,, NATO ASI Ser. 260, Kluwer Academic Publications, London
Han S.W., Kim Y. and Kim K. (1998). Dodecanethiol-derivatized Au/Ag bimetallic nanoparticles: TEM, UV/VIS, XPS, and FTIR analysis J. Colloid Interface Sci. 208: 272–278
Haruta M. & Sano H. (1983) in `Preparation of Catalysts III', G. Poncelet, P. Grange & P.A. Jacobs (eds.) Elsevier, Amsterdam, p. 225.
Haruta M. and Date M. (2001). Advances in the catalysis of Au nanoparticles Appl. Catal. A 222: 427–437
Haruta M., Sano H. & Kobayashi T. (1987) `Method for manufacture of catalyst composite having gold or mixture of gold with catalytic metal oxide deposited on a support' US Patent # 4698324.
Haruta M., Yamada N., Kobayashi T. and Iijima S. (1989). Gold catalysts prepared by coprecipitation for low-temperature oxidation of hydrogen and of carbon monoxide J. Catal. 115: 301–9
Huang C.-Y., Chiang H-J., Huang J-C. and Sheen S.R. (1999). Synthesis of nanocrystalline Ag-Pd alloys by chemical reduction method Nanostruct. Mat. 10: 1393–1400
Huber H., McIntosh D. and Ozin G.A.(1977). A metal atom model for the oxidation of carbon monoxide to carbon dioxide. The gold atom-carbon monoxide-dioxygen reaction and the gold atom-carbon dioxide reaction Inorganic Chemistry 16: 975–9
Kelly K.L., Coronado E., Zhao L.L. and Schatz G.C.(2003). The optical properties of metal nanoparticles: The influence of size, shape, and dielectric environment J. Phys. Chem. B 107: 668–677
Kim M.-J., Na H.-J., Lee K.C., Yoo E.A. and Lee M. (2003). Preparation and characterization of Au-Ag and Au-Cu alloy nanoparticles in chloroform J. Materials Chemistry 13: 1789–1792
Kittel C. & P. McEuen (2004) `Introduction to Solid State Physics'. 8th edn. John Wiley & Sons Inc, New. York
Li S. and El-Shall M.S.(1999). Synthesis and charcterization of photochromic molybdenum and tungsten oxide nanoparticles Nanostruct. Mat. 12: 215–219
Li S., Silvers S.J. and El-Shall M.S.(1997). Surface oxidation and luminescence properties of weblike agglomeration of silicon nanocrystals produced by a laser vaporization-controlled condensation technique J. Phys. Chem. B 101: 1794–1802
Link S., Burda C.,Nikoobakht B., El-Sayed M.A.(1999). How long does it take to melt a gold nanorod? A femtosecond pump-probe absorption spectroscopic study. Chem. Phys. Letters 315: 12–18
Liu T., Leng Y. and Li X. (2003). Preparation and characteristics of Fe3Al nanoparticles by hydrogen plasma-metal reaction Solid State Commun 125: 391–394
Liz-Marzan L.M. and Kamat P.V.(eds) (2003) “Nanoscale Materials”. Kluwer Academic Publishers, Boston, Dordrecht, London
Luengnaruemitchai A., Osuwan S. and Gulari E. (2003). Comparative studies of low-temperature water-gas shift reaction over Pt/CeO2, Au/CeO 2 and Au/Fe2O3 catalysts Catal. Commun. 4: 215–221
Mohr C., Hofmeister H., Lucas M. and Claus P. (2000). Gold catalysts for the partial hydrogenation of acrolein Chem. Eng. Technol. 23: 324–328
Moser W.R. (ed.) (1996) `Advanced catalysts and nanostructured materials: modern synthetic methods', Academic press.
Pithawalla Y.B., El-Shall M.S., Deevi S.C., Stroem V. and Rao K.V. (2001).Synthesis of magnetic intermetallic FeAl nanoparticles from a non-magnetic bulk alloy. J. Phys. Chem. B 105: 2085–2090
Sanchez R.M.T., Ueda A., Tanaka K. and Haruta M. (1997). Selective oxidation of CO in hydrogen over gold supported on manganese oxides. J Catal 168: 125–127
Sun Y. and Xia Y. (2002). Shape-controlled synthesis of gold and silver nanoparticles Science 298: 2176–2179
Sun Y. and Xia Y. (2003). Gold and silver nanoparticles: A class of chromophores with colors tunable in the range from 400 to 750 nm Analyst 128: 686–691
Trovarelli A., de Leitenburg C., Boaro M. and Dolcetti G. (1999). The utilization of ceria in industrial catalysis. Catal Today 50: 353–367
Tschope A., Liu W., Flytzani-Stephanopoulos M. and Ying J.Y.(1995). Redox activity of nonstoichiometric cerium oxide-based nanocrystalline catalysts J. Catal. 157: 42–50
Varon J., Marik P.E., Fromm R.E., Gueler A. (1999). Carbon monoxide poisoning: A review for clinicians J. Emergency Med17: 87–93
Wolf A. and Schuth F. (2002). A systematic study of the synthesis conditions for the preparation of highly active gold catalysts Appl. Catal. A 226: 1–13
Yamada Y., Ueda A., Zhao Z., Maekawa T., Suzuki K., Takada T. and Kobayashi T. (2001).Rapid evaluation of oxidation catalysis by gas sensor system: total oxidation, oxidative dehyrogenation, and selective oxidation over metal oxide catalysts. Catal Today 67: 379–387
Acknowledgments
The authors thank Philip Morris, USA and NASA (NNG04GH45G) for the financial support of this research.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Abdelsayed, V., Saoud, K. & El-Shall, M.S. Vapor phase synthesis and characterization of bimetallic alloy and supported nanoparticle catalysts. J Nanopart Res 8, 519–531 (2006). https://doi.org/10.1007/s11051-005-9022-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11051-005-9022-0