Abstract
The new results of an extensive study of the effects of alloying elements upon the properties of iron are presented, including lattice parameters, elastic constants, the effect of temperature on strength, solid solution strengthening and softening, work hardening, strain aging, hot working and toughness.
References
M. Gensamer:Trans. ASM, 1946, vol. 36, p. 30.
E. R. Parker:Trans. ASM, 1958, vol. 50, p. 52.
E. D. Campbell:Trans. AIME, 1915, vol. 53, p. 235.
R. P. Steijn and R. M. Brick:Trans. ASM, 1954, vol. 46, p. 1406.
M. Castagna, A. Ferro, F. S. Rossi, J. Sebille, and G. Szabo-Miszenti:Mem. Sci. Rev. Met., 1966, vol. 63, p. 555.
G. A. Beresnev, V. I. Sarrak, and R. I. Éntin:Dokl. AkadNauk SSSR, 1966, vol. 167, p. 322.
W. C. Leslie and R. J. Sober:Trans. ASM, 1967, vol. 60, p. 99.
W. C. Leslie and R. J. Sober:Trans. ASM, 1967, vol. 60, p. 459.
H. E. Rosinger, W. J. Bratina, and G. B. Craig:Trans. TMS-AIME, 1969, vol. 245, p. 2097.
R. P. Gamble: M.S. Thesis, Cornell University, 1969.
W. C. Leslie, R.J. Sober, S. G. Babcock, and S. J. Green:Trans. ASM, 1969, vol. 62, p. 690.
H. D. Solomon, C. J. McMahon, Jr., and W. C. Leslie:Trans. ASM, 1969, vol. 62, p. 886.
J. R. Rellick and C. J. McMahon, Jr.:Met. Trans., 1970, vol. 1, p. 929.
H. A. Wriedt and L. Zwell:Trans. TMS-AIME, 1962, vol. 224, p. 1242.
L. Zwell,D. E. Carnahan, and G. R. Speich: Met. Trans., 1970, vol. l,p. 1007.
L. Zwell, J. T. Michalak, and H. A. Wriedt: J. Appl. Cryst., 1970, vol. 3, p. 357.
L. Zwell and H. A. Wriedt:Met. Trans., in press.
L. Zwell, G. R. Speich, and W. C. Leslie: Fund. Res. Lab., U. S. Steel Corp., unpublished research.
L. Zwell: Fund. Res. Lab., U. S. Steel Corp., unpublished research.
H. W. King:J. Mater. Sci., 1966, vol. 1, p. 79.
W. B. Pearson:Handbook of Lattice Spacings and Structures of Metals and Alloys, vol. 1,b 1958, vol. 2, 1967, Pergamon Press, N. Y.
E. Hornbogen:Trans. ASM, 1961, vol. 53, p. 569.
B. Gale:Acta Met., 1959, vol. 7, p. 420.
S. Takeuchi, H. Yoshida, and T. Taoka:Proc. 1st Int. Conf. Strength of Metals and Alloys, Supp. Trans. Japan Inst. Metals, 1968, vol. 9, p. 715.
S. Takeuchi: J. Phys. Soc. Japan, 1969, vol. 27, p. 929.
G. R. Speich, A. J. Schwoeble, and W. C. Leslie: Fund. Res. Lab., U. S. Steel Corp., unpublished research.
W. Köster:Met. Rev., 1961, vol. 6, p. 1.
J. L. Routbort, C. N. Reid, E. S. Fisher, and D. J. Dever: Acta Met., to be published.
F. X. Kayser and E. D. Gibson: Iowa State University, Ames, Iowa, unpublished research.
A. Reuss:Z. Angew. Math. Mech., 1929, vol. 9, p. 49.
W. Voigt:Lehrbuch der Kristall Physik, p. 962, Teudner, Leipzig, 1928.
R. Hill:Proc. Phys. Soc, 1952, vol. 65, p. 350.
P. B. Hirsch:Proc. 1st Int. Conf. Strength of Metals and Alloys, Supp. Trans. Japan Inst. Metals, 1968, vol. 9, p. XXX.
J. W. Christian:Proc. 2nd Int. Conf. Strength of Metals and Alloys, vol. I, p. 29, ASM, Cleveland, Ohio, 1970.
T. Imura, H. Saka, and N. Yukawa:J. Phys. Soc. Japan, 1969, vol. 26, p. 1327.
H. D. Solomon and C. J. McMahon, Jr.:Acta Met., 1971, vol. 19, p. 291.
H. L. Prekel, A. Lawley, and H. Conrad:Acta Met., 1968, vol. 16, p. 337.
Y. Nakada and A. S. Keh:Acta Met., 1968, vol. 16, p. 903.
B. W. Christ and G. V. Smith:Met. Trans., 1970, vol. 1, p. 827.
T. Tanaka and S. Watanabe:Acta Met., 1971, vol. 19, p. 991.
A. S. Keh:Phil. Mag, Ser. 8,1965, vol. 12, p. 26.
B. L. Mordike and K. D. Rogausch:Proc. 2nd Int. Conf. Strength of Metals and Alloys, vol. 1, p. 258, ASM, Cleveland, Ohio, 1970.
P. Haasen:Proc. 1st Int. Conf. Strength of Metals and Alloys, Supp. Trans. Japan Inst. Metals, 1968, vol. 9, p. XL.
T. Suzuki:Proc. 2nd Int. Conf. Strength of Metals and Alloys, vol. I, p. 237, ASM, Cleveland, Ohio, 1970.
N. F. Mott and F. R. N. Nabarro:Bristol Conf. Strength of Solids, p. 1, Phys. Soc, London, 1948.
J. C. M. Li:Dislocation Dynamics, p. 87, McGraw Hill, N. Y., 1968.
R. L. Fleischer:Acta Met., 1963, vol. 11, p. 203.
R. L. Fleischer:The Strengthening of Metals, p. 93, Reinhold, N. Y., 1964.
R. Labusch:Phys. Status Solidi, 1970, vol. 41, p. 659.
H. Suzuki: to be published, 1971,Nachr. Gött. Akad. Wiss.
J. van der Planken and A. Deruyttere:J. Mater. Sci., 1969, vol. 4, p. 499.
E. T. Teatum, K. A. Gschneidner, Jr., and J. T. Waber:Compilation of Calcu- lated Data Useful in Predicting Metallurgical Behavior of the Elements in Binary Alloy Systems, L. A. 4003, U. C. 25, TID-4500, 1968.
C. E. Lacy and M. Gensamer:Trans. ASM, 1944, vol. 32, p. 88.
N. P. Allen:Iron and Its Dilute Solid Solutions, p. 271, Interscience, N.Y., 1963.
H. H. Kranzlein, M. S. Burton, and G. V. Smith:Trans. TMS-AIME, 1965, vol. 233, p. 64.
Y. G. Nakagawa and K. Hirano:Proc. 1st Int. Conf. Strength of Metals and Alloys, Supp. Trans. Japan Inst. Metals, 1968, vol. 9, p. 702.
L. J. Cuddy and W. C. Leslie:Proc. 2nd Int. Conf. Strength of Metals and Alloys, vol. I, p. 253, ASM, Cleveland, Ohio, 1970.
W. E. Sauer: Ph.D. Thesis, Drexel University, June 1970.
W. A. Spitzig: Fund Res. Lab., U. S. Steel Corp., unpublished research.;
S. K. Lahiri and M. E. Fine:Met. Trans., 1970, vol. 1, p. 1495.
A. Sato, T. Mifune, and M. Meshii:Proc. 2nd Int. Conf. Strength of Metalsand Alloys, vol. II, p. 747, ASM, Cleveland, Ohio, 1970.
K. V. Ravi and R. Gibala:Acta Met., 1970, vol. 18, p. 623.
R. L. Smialek, G. L. Webb, and T. E. Mitchell:Scripta Met., 1970, vol. 4, p. 33.
R. J. Arsenault:Microplasticity, p. 91, Interscience, N. Y., 1968.
C. D. Statham and J. W. Christian:Scripta Met., 1971, vol. 5, p. 399.
W. A. Spitzig and W. C. Leslie:Acta Met., to be published, 1971.
W. A. Spitzig and A. S. Keh:Acta Met., 1970, vol. 18, p. 1021.
A. Urakami and M. E. Fine:Proc. Int. Conf. Mechanical Behavior of Materials, Kyoto, Japan, August, 1971.
T. Sakuma and S. Karashima:Proc. 2nd Int. Conf. Strength of Metals and Alloys, vol. 1, p. 88, ASM, Cleveland, Ohio, 1970.
B. W. Christ, R. P. Gamble, and G. V. Smith:Scripta Met., 1969, vol. 3, p. 521.
K. Sakamoto, H. Wada, and T. Sugeno:Proc. 1st Int. Conf. Strength of Metals and Alloys, Supp. Trans. Japan Inst. Metals, 1968, vol. 9, p. 720.
G. Langford and M. Cohen:Trans. ASM, 1969, vol. 62, p. 623.
H. J. Rack and M. Cohen:Mater. Sci. Eng., 1970, vol. 6, p. 320.
G. Langford, R. J. Sober, P. Nagata, and W. C. Leslie: Fund. Res. Lab., U. S. Steel Corp., unpublished research.
W. A. Spitzig: Fund. Res. Lab., U. S. Steel Corp., unpublished research.
W. B. Morrison and W. C. Leslie: Fund Res. Lab., U. S. Steel Corp., unpub- lished research.
J. D. Baird:Iron and Steel, 1963, vol. 36, p. 186.
K. Hirano, M. Cohen, and B. L. Averbach:Acta Met, 1961, vol. 9, p. 440.
R. J. Borg and D. Y. F. Lai:J. Appl. Phys., 1970, vol. 41, p. 5193.
B. J. Brindley and P. J. Worthington:Met. Rev., 1970, vol. 15, p. 101.
L. J. Cuddy: Fund. Res. Lab., U. S. Steel Corp., unpublished research.
J. D. Baird and A. Jamieson:J. Iron Steel Inst, 1966, vol. 204, p. 793.
J. D. Baird and A. Jamieson: British Steel Corp., private communication, July, 1971.
R. P. Fedora: Ph.D. Thesis, Cornell University, 1971.
M. R. Winstone and R. D. Rawlings: Imperial College of Science and Technology, London, England, private communication, August, 1971.
J. Glen:Am. Soc. Test. Mater., Spec. Tech. Publ. 128, 1952, p. 184.
J. Glen:J. Iron Steel Inst, 1957, vol. 186, p. 21.
L. M. T. Hopkin:J. Iron Steel Inst, 1965, vol. 203, p. 583.
P. G. Forrest and L. M. T. Hopkin:The Relation Between Structure and Mechanical Properties of Metals and Alloys, p. 348, H.M.S.O., London, 1963.
L. F. Coffin:Trans. TMS-AIME, 1964, vol. 230, p. 1690.
J. D. Baird:Met. Rev., 1971, vol. 16, p. 1.
H. E. Knechtel and W. C. Leslie: Fund. Res. Lab., U. S. Steel Corp., unpublished research.
B. F. Oliver and F. Garofalo:Trans. TMS-AIME, 1965, vol. 233, p. 1318.
D. Tabor: The Hardness of Metals, Chap. VII, Clarendon Press, Oxford, 1951.
J. R. Cahoon, W. H. Broughton, and A. R. Kutzak:Met. Trans., 1971, vol. 2, p. 1979.
R. M. Douthwaite:J. Iron Steel Inst, 1970, vol. 208, p. 265.
J. L. Robbins, H. Wagenaar, O. C. Shepard, and O. D. Sherby:J. Mater., 1967, vol. 2, p. 271.
O. D. Sherby and P. M. Burke:Prog. Mater. Sci., 1967, vol. 13, no. 7, p. 325.
J. J. Jonas, C. M. Sellars, and W. J. McG. Tegart:Met. Rev., 1969, vol. 14, p. 1.
C. R. Barrett and O. D. Sherby:Trans. TMS-AIME, 1965, vol. 233, p. 116.
R. G. Stang: Ph.D. Thesis, Stanford University.
C. R. Barrett:Trans. TMS-AIME, 1967, vol. 239, p. 1726.
J. Weertman:J. Appl. Phys., 1957, vol. 28, p. 1185.
W. D. Klopp:NASA Tech. Note, TN D-4955, December, 1968.
W. D. Klopp:J. Metals, November, 1969, vol. 21, p. 23.
W. Brewer:Science, 1968, vol. 161, p. 115.
W. Hume-Rothery:Prog. Mater. Sci., 1967, vol. 13, p. 229.
W. C. Leslie:Met. Trans., 1971, vol. 2, p. 1989.
W. A. Spitzig: Fund. Res. Lab., U. S. Steel Corp., unpublished research, 1971.
N. S. Stoloff, R. G. Davies, and R. C. Ku:Trans. TMS-AIME, 1965, vol. 233, p. 1500.
V. I. Sarrak and N. A. Shilov:Fiz. Metal. Metalloved., 1966, vol. 22, no. 4, p. 606.Phys. Metals Metallography, 1966, vol. 22, no. 4, p. 135.
M. Krön, A. Constant, A. Clerc, J. Plateau, G. Henry, M. Robert, and C. Crussard:Mem. Sci. Rev. Met., 1961, vol. 58, p. 901.
W. Jolley:J. Iron Steel Inst., 1968, vol. 206, p. 170.
W. Jolley:Trans. TMS-AIME, 1968, vol. 242, p. 306.
H. W. Hayden and S. Floreen:Phil. Mag., Ser. 8, 1969, vol. 20, p. 135.
S. Floreen, H. W. Hayden, and T. M. Devine:Met. Trans., 1971, vol. 2, p. 1403.
S. Floreen and H. W. Hayden:Trans. TMS-AIME, 1967, vol. 239, p. 1405.
S. F. Pugh:Phil. Mag., Ser. 7, 1954, vol. 45, p. 823.
D. E. Crutchley and C. N. Reid:High Temperature Materials, p. 57, Metallwerke Plansee AG, Reutte, Tyrol, 1969.
D. E. Crutchley, C. N. Reid, and T. H. Webster:Proc. 2nd Int. Conf. Strength Metals and Alloys, vol. I, p. 127, ASM, Cleveland, Ohio, 1970.
T. L. Johnston, R. G. Davies, and N. S. Stoloff:Phil. Mag., Ser. 8, 1965, vol. 12. p. 305.
Rights and permissions
About this article
Cite this article
Leslie, W.C. Iron and its dilute substitutional solid solutions. Metall Trans 3, 5–26 (1972). https://doi.org/10.1007/BF02680580
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02680580