References
L.E. Weiss, E.L. Gursoz, F.B. Prinz, P.S. Fussell, S. Mahalingam, and E.P. Patrick, A Rapid Tool Manufacturing System Based on Stereoli- thography and Thermal Spraying,ASME Manufacturing Review, Vol 3 (No. 1), 1990, p 40–48
Proceedings of the Solid Freeform Fabrication Symposia, Aug 1990, 1991, and 1992, J.J. Beaman, H.L. Marcus, D.L. Bourell, and J.W. Barlow, Ed., The University of Texas at Austin
L.E. Weiss, F.B. Prinz, and E.L. Gursoz, Rapid Tool Manufacturing, U.S. Patent 5,189,781
L.E. Weiss and L. Schultz, Sprayed Metal Dies, U.S. Patent 5,079,974
L.E. Weiss, F.B. Prinz, D.A. Adams, and D.P. Siewiorek, Thermal Spray Shape Deposition,Journal of Thermal Spray Technology, Vol l(No.3), 1992, p 231–237
J.E. Beck, F.B. Prinz, D.P. Siewiorek, and L.E. Weiss, Manufacturing Mechatronics Using Thermal Spray Shape Deposition, paper presented at Solid Freeform Fabrication Symposium, The University of Texas at Austin, Aug 1992
Author information
Authors and Affiliations
Additional information
Extracted from the “Symposium on Spray Forming,” paper 3 of 12 contributions, held at the National Thermal Spray Conference, Anaheim, June 1993, This abstract has been edited by C.C. Berndt (SUNY at Stony Brook).
Rights and permissions
About this article
Cite this article
Weiss, L.E., Prinz, F. A thermal spray approach to rapid prototyping—An extended abstract. JTST 3, 297–298 (1994). https://doi.org/10.1007/BF02646277
Issue Date:
DOI: https://doi.org/10.1007/BF02646277