Abstract
Interaction between theory and practice in the field of solidification has been strong in recent years, to the great benefit of both. Solution of important problems has required conceptualizing on greatly different size scales simultaneously, and has also required extensive experimentation to suggest and justify suitable approximations for theoretical analyses. Some areas of solidification where theory and practical application have advanced, or are advancing nicely together are dendrite arm spacing, grain size control, columnar structures, eutectic-like in-situ composites, inclusion formation, macrosegregation, and non-dendritic structures.
Similar content being viewed by others
References
M. C.Flemings:Solidification Processing, McGraw-Hill, January 1974.
J. W. Cahn:Acta Met., 1960, vol. 8, p. 554.
R. E. Spear and G. R. Gardner:Trans. AFS, 1963, vol. 71, p. 209.
T. F. Bower, H. D. Brody, and M. C. Flemings:Trans. TMS-AIME, 1966, vol. 236, pp. 624–34.
H. Matyja, B. C. Giessen, and N. J. Grant:J. Inst. Metals, 1968, vol. 96, p. 30.
M. C. Flemings and H. F. Taylor:Aerospace Eng., July 1962, pp. 10–15.
F. L. VerSnyder and M. E. Shank:Mater. Sci. Eng., 1970, vol. 6, p. 213.
F. R. Mollard and M. C. Flemings:Trans. TMS-AIME, 1967, vol. 239, pp. 1534–46.
M. D. Rinaldi, R. M. Sharp, and M. C. Flemings:Met. Trans., 1972, vol. 3, pp. 3133–48.
H. Bibring, G. Seibel, and M. Rabinovitch:Mem. Sci. Rev. Met., 1972, vol. 49, no. 5, p. 341.
J. Yrwood, M.C. Flemings, and J. F. Elliott:Met. Trans., 1971, vol. 2, pp. 2573–82.
T. Braun, J. F. Elliott, and M. C. Flemings: to be published.
S. N. Singh: 1974, vol. 5, pp. 2165–78
D. B. Spencer, R. Mehrabian, and M. C. Flemings:Met. Trans., 1972, vol. 3, pp. 1925–32.
M. C. Flemings and R. Mehrabian: “Casting Semi-Solid Metals,” Transaction, International Foundry Congress, Moscow, 1973,AFS Trans., 73–102, pp. 81–88.
E. F. Fascetta, R. G. Riek, R. Mehrabian, and M. C. Flemings:Die Casting Engineer, September-October 1973, pp. 44–54. (AlsoAFS Cast Metals Res. J., December 1973, vol. 9, no. 4, pp. 167–71.)
R. Mehrabian, R. G. Riek, and M. C. Flemings:Met. Trans., 1974, vol. 5, pp. 1899–1905.
Rights and permissions
About this article
Cite this article
Flemings, M.C. Solidification processing. Metall Trans 5, 2121–2134 (1974). https://doi.org/10.1007/BF02643923
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02643923