References
Irwin, G.R. andWells, A.A., “A Continuum Mechanics View of Crack Propagation,”Metallurgical Review,10 (58)223–270 (1965).
Griffith, A. A., “The Phenomena of Rupture and Flow in Solids,”Phil. Trans. of Royal Soc. of Londin,221,163–198 (1921).
Irwin, G.R. and Kies, J., “Fracturing and Fracture Dynamics,” Welding Jnl. Research Supplement (Feb. 1952).
Orowan, E., “Fundamentals of Brittle Behavior of Metals,” Fatigue and Fracture of Metals, John Wiley & Sons, 139–167 (1952).
Bueckner, H.F., “The Propagation of Cracks and Energy of Elastic Deformation,” Jnl. of Appl. Mech., Trans of ASME, 1225–1229 (Aug. 1958).
Irwin, G.R., “Fracture,”Handbuch der Physik,6,551–590 (1958).
Sih, G.C. andLiebowitz, H., “Mathematical Theories of Brittle Fracture,”Fracture (editor, H. Liebowitz),2,67–190 (1968).
Rice, J.R., “Mathematical Analysis in the Mechanics of Fracture,”Fracture (editor, H. Liebowitz),2,191–311 (1968).
Paris, P.C. andSih, G.C., “Stress Analysis of Cracks,”Fracture Toughness Testing and Its Applications, ASTM STP 381, 39–76 (1965).
Westergaard, H.M., “Bearing Pressure and Cracks,”J. of Applied Mech., Trans. of ASME,6 (2),A-49–A-52 (June 1939).
Muskhelishvili, N.I., Some Basic Problems of the Mathematical Theory of Elasticity, translated by I.R.M. Radok, Noordhoff (1953).
Zienkiewicz, O.C. and Cheung, Y.K., The Finite Element Method in Engineering Science, McGraw-Hill (1971).
Watwood, V.B., “The Finite Element Method for Prediction of Crack Behavior,”Nuclear Engrg. and Design,11,323–332 (1969).
Kobayashi, A.S., Chiu, S.T. and Beeuwkes, R., “Elastic-Plastic State in a Plate with an Extending Crack,” Proc. of the Army Symposium on Solid Mechanics—Lightweight Structure (1970).
Isida, M. and Itagaki, Y., “Stress Concentration at the Tip of a Central Transverse Crack in a Stiffened Plate Subjected to Tension,” Proc. of 4th U.S. Natl. Cong. of Appl. Mech., 955–970 (1962).
Tiffany, C.F. andMasters, J.N., Applied Fracture Mechanics, ASTM STP, 381, 249–278 (1965).
Folias, E.S., “On the Theory of Fracture of Curved Sheet,”Jnl. of Engrg. Fract. Mech.,2,151–164 (1970).
Gross, B., Srawley, J.E. and Brown, W.F., Stress Intensity Factor for a Single-Edge-Notch Tension Specimen by Boundary Collocation, NASA TN D-2395 (Aug. 1964).
Erdogan, F. and Sih, G.C., “On the Crack Extension in Plates under Plane Loading and Transverse Shear,” Jnl. of Basic Engrg., Trans. of ASME, 519–527 (Dec. 1963).
Wu, E.M., “Application of Fracture Mechanics to Anisotrophic Plates,”Jnl. of Appl. Mech., Trans. of ASME,34,Series E (4),967–974 (Dec. 1967).
Paris, P.C., “The Fracture Mechanics Approach to Fatigue,” Proc. of 10th Sagamore Conf., Syracuse University Press, 107–132 (1965).
Iida, S. andKobayashi, A.S., “Crack Propagation Rate in 7075-T6 Plates under Cyclic Tensile and Transverse Shear Loadings,”Jnl. of Basic Engrg., Trans. of ASME,91,Series D (4),764–769 (Dec. 1964).
Sach, R.A., “Extension of Griffith Theory of Rupture to Three Dimensions,”Proc. of Phys. Soc. London,58,729–736 (1946).
Sneddon, I.N., “The Distribution of Stress in the Neighborhood of a Crack in an Elastic Solid,” Proc. of the Royal Soc., London, Series A, 187 (1946).
Green, A.E. and Sneddon, I.N., “The Stress Distribution of the Neighborhood of a Flat Elliptical Crack in an Elastic Solid,” Proc. of Cambridge Philosophical Soc.,46 (1956).
Thresher, R.W. andSmith, F.W., “Stress Intensity Factors for a Surface Crack in a Finite Solid,”Jnl. of Appl. Mech., Trans. of ASME,95,195–200 (Mar. 1972).
Smith, F.W., Emery, A.F. andKobayashi, A.S., “Stress Intensity Factors for Semi-Circular Cracks, Part II-Semi-Infinite Solid,”Jnl. of Appl. Mech., Trans. of ASME,34,Series E,953–959 (Dec. 1967).
Love, A.E.H., “On the Stress Produced in a Semi-Infinite Solid by Pressure on Part of the Boundary,”Phil. Trans. of the Royal Soc., London,228,Series A,378–395 (1929).
Sih, G.C., “Three-Dimensional Stress-State in a Cracked Plate,” Proc. of the Air Force Conf. on Fatigue and Fracture of Aircraft Structures and Materials (Sept. 1970).
Irwin, G.R., “The Crack Extension Force for a Part-Through Crack in a Plate,”Jnl. of Appl. Mech., Trans. of ASME,29,651–654 (Dec. 1962).
Smith, F.W. andAlavi, M.J., “Stress-Intensity Factors for a Penny-Shaped Crack in a Half Space,”Intl. Jnl. of Engrg. Fract. Mech.,3,241–254 (Oct. 1971).
Smith, F.W. and Alavi, M.J., “Stress-Intensity Factors for a Part-Circular Surface Flaw,” Proc. of 1st Intl. Conf. on Pressure Vessels and Pipe Lines, Delft, Holland (Aug. 1969).
Shah, R.C. andKobayashi, A.S., “Stress-Intensity Factor for an Elliptical Crack under Arbitrary Normal Loading,”Intl. Jnl. of Engrg. Fract. Mech.,3,71–96 (July 1971).
Kassir, M.K. andSih, G.C., “Three-Dimensional Stress Distribution around an Elliptical Crack under Arbitrary Loadings,”Inl. of Appl. Mech., Trans. of ASME,33,601–611 (Sept. 1966).
Smith, F.W. andSorensen, D.R., “The Semi-elliptical Surface Crack—A Solution by the Alternating Method,”Intl. J. of Fracture,12 (1),47–57 (Feb. 1976).
Kobayashi, A.S., “Crack Opening Displacement in a Surface Flawed Plate Subjected to Tension of Plate Bending,” Proc. of the 2nd Intl. Conf. on Mechanical Behavior of Materials, ASTM, 1073–1077 (1976).
Cruse, T.A. and Meyers, G.J., “Elastic Fracture Mechanics Analysis for 3-Dimensional Cracks,” ASCE, National Structural Engineering Convention Preprint 2430 (April 1975).
Chen, Y.M. and Wilkins, M.L., “Fracture Analysis with a Three-Dimensional Time-Dependent Computer Program,” Lawrence Livermore Laboratory UCRL-75703 (May 1974).
Raju, I.S. andNewman, J.C., Jr., “Stress Intensity Factors for a Wide-Range of Semi-Elliptical Surface Cracks in Finite Thickness Plates,”Engrg. Fract. Mech.,11 (4),817–830 (1979).
Atluri, S. and Kathiresan, A., “An Assumed Displacement Hybrid Finite Element Model for Three-Dimensional Linear Fracture Mechanics Analysis,” Proc. of the 12th Annual Meeting of the Soc. of Engrg. Science, University of Texas at Austin (Oct. 1976).
Helen, T.K. and Blackburn, W.S., “The Calculation of Stress Intensity Factors in Two and Three Dimensions Using Finite Elements,” Computational Fracture Mechanics, edited by W.F. Rybicki and S.E. Benzley, ASME, 103–120 (1975).
“Three-Dimensional Fracture Analysis Proceedings of a Workshop Held at Battelle's Columbus Laboratories,” edited by L.E. Hulbert, Battelle-Columbus (April 1976).
“Comparison of Numerical Solutions to the Surface Flawed Plate: Benchmark Problem I,” edited by J.J. McGowan, To be published.
Newman, J.C., Jr., “A Review and Assessment of the Stress Intensity Factors for Surface Cracks,” NASA TM-78805 (Nov. 1978).
Kobayashi, A.S., Emery, A.F., Polvanich, N.H. andLove, W.J., “Outer and Inner Surface Cracks in Internally Pressurized Cylinders,”ASME J. of Pressure Vessel Technology,99,Series J,83–89 (Feb. 1977).
Atluri, S.N. and Kathiresan, K., “Outer and Inner Surface Flaws in Thick-Walled Pressure Vessel,” Trans of the 4th Intl. Conf. on Structural Mechanics in Reactor Technology, CECA, CEE, CEEA Luxembourg, Paper G5/4 (1977).
Heliot, J., Labbens, R.C. and Pellissier-Tanon, A., “Semi-Elliptical Cracks in the Meridinal Plane of a Cylinder Subjected to Stress Gradient,” to be published in the Symp. Volume on 11th Fracture Mechanics, ASTM.
McGowan, J.J. and Raymond, M., “Stress Intensity Factor Solutions for Internal Longitudinal Semi-Elliptical Surface Flaws in a Cylinder under Arbitrary Loadings,” ibid loc cit.
Tada, H., Paris, P.C. and Irwin, G.R., “The Stress Analysis of Cracks Handbook,” Del Research Corporation (1973).
Sih, G.C., “Handbook of Stress Intensity Factors for Researchers and Engineers,” Lehigh University (1973).
Barsoum, R.S., “Application of Quadratic Isoparametric Finite Elements in Linear Fracture Mechanics,”Intl. J. of Fracture,10 (4),603–605 (Dec. 1974).
Kobayashi, A.S., Polvanich, P.M., Emery, A.F. and Love, W.J., “Stress Intensity Factors of Corner Cracks in Two Nozzle-Cylinder Intersections,” Trans. of the 4th Intl. Conf. on Structural Mechanics in Reactor Technology, CECA, CEE, CEEA Luxembourg, Paper G4/4 (1977).
Besuner, P.M., Cohen, L.M. and McLean, J.L., “The Effects of Location, Thermal Stress, and Residual Stress on Corner Cracks in Nozzles with Cladding,” ibid loc cit, Paper G4/5 (1977).
Smith, C.W., Jolles, M.I. AND Peters, W.H., “Geometric Influences Upon Stress Intensity Distributions Along Reactor Vessel Nozzle Cracks,” ibid loc cit, Paper G4/3 (1977).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kobayashi, A.S. Fracture mechanics. Experimental Mechanics 19, 456–468 (1979). https://doi.org/10.1007/BF02326050
Issue Date:
DOI: https://doi.org/10.1007/BF02326050