Abstract
The metallurgy and mechanical behaviour of the principal solder types based on lead-tin alloys are reviewed. Particular emphasis is placed upon their performance under simulated service conditions, fatigue, creep and ageing, and life prediction. Requirements for improved and more environmentally compatible solders are explored.
Similar content being viewed by others
References
J. H. VINCENT and G. HUMPSTON,GEC J. Res. 11 (1994) 76.
K. R. KINSMAN in “Solder mechanics — a state of the art assessment”, edited by D. R. Frear, W. B. Jones and K. R. Kinsman (The Metals Society, Electronic, Magnetic and Photonic Materials Division 1, 1990) XIX.
J. SOOVERE, B. V. DANDAWATE, G. A. GARFINKEL, N. ISIKBAY and D. S. STEINBERG, Report AFWALTR-87-3048, Flight Dynamics Laboratory, Wright Patterson AFB, OH (1987).
H. J. FROST, in “Solder joint reliability, theory and applications”, edited by J. H. Lau (van Nostrand Reinhold, New York, 1991) p. 266.
E. C. CUTIONGCO, S. VAYNMAN, M. E. FINE and D. A. JEANNOTTE,J. Electronic Packaging 112 (1990) 110.
M. A. WHITMORE, P. G. HARRIS, K. S. CHAGGAR and A. C. CHILTON, NEPCON Europe, Birmingham, March 1990.
C. GAGG, private communication (1994).
B. T. LAMPE,Welding J. Research Supp. 55 (1976) 3305.
D. R. FREAR, J. B. POSTHILL and J. W. MORRIS Jr,Metall. Trans. 20A (1989) 1325.
S. VAYNMAN and M. E. FINE, “Solder joint reliability, theory and applications”, edited by J. H. Lau (van Nostrand Reinhold, New York, 1991) 333.
E. LEVINE and J. ORDONEZ,IEEE Comp. Hybrids Manufact. Tech. CHMT-4 (1981) 515.
D. FREAR,J. Met. 40 (1988) 18.
A. D. ROMIG, Y. A. CHANG, J. J. STEPHENS, D. R. FREAR, V. MARCOKER and C. LEA, “Solder mechanics-a state of the art assessment”, edited by D. R. Frear, W. B. Jones and K. R. Kinsman (The Metals Society, Electronic, Magnetic and Photonic Materials Division 1, 1990) 29.
K. P. JEN and J. N. MAJERUS,J. Engng Mater. Technol. 113 (1991) 475.
B. P. KASHYAP and G. S. MURTY,Res. Mechanica. 3 (1981) 131.
K. KAWASHIMA, T. ITO and M. SAKURAGI,J. Mater. Sci. 27 (1992) 6387.
R. ARROWOOD, A. MUKHERJEE and W. B. JONES, in “Solder mechanics—a state of the art assessment”, edited by D. R. Frear, W. B. Jones and K. R. Kinsman (The Metals Society, Electronic, Magnetic and Photonic Materials Division 1, 1990) p. 107.
B. P. KASHYAP and G. S. MURTY,J. Mater. Sci. 18 (1983) 2063.
E. PINK, A. MARQUEZ and A. GRINBERG,Scripta Metall. 15 (1981) 191.
C. GAGG, W. J. PLUMBRIDGE and R. HERMANN, unpublished work.
A. E. GECKINLI and C. R. BARNETT,Scripta Metall. 8 (1974) 115.
J. P. CLECHE and J. A. AUGIS, IEPS, Dallas, Nov 1988, p. 305.
H. D. SOLOMON, in “Electronic packaging: materials and processes”, edited by J. A. Sortell (ASM, Metals Park, OH, 1985) p. 29.
G. ENGBERG, L. E. LAVSSON, M. NYLEN and H. STEEN,Brazing and Soldering 11 (1986) 62.
K. BOCE, K. BAE, A. F. SPRECHER, D. Y. JUNG and H. CONRAD, in Proceedings Second ASM International Electronic Materials and Processing Congress, edited by W. T. Shieh, 1989, p. 264.
S. VAYNMAN, M. E. FINE and D. A. JEANNOTTE,Metall. Trans. 19A (1988) 1051.
R. SANDSTRÖM, J. O. ÖSTERBERT and M. NYLEN,Mater. Sci. Tech. 9 (1993) 811.
M. KITANO, T. SHIMIZU and T. KUMAZAVA,Current Japanese Mater. Res. 2 (1987) 235.
P. M. HALL,IEEE Comp, Hybrids Manufact. Tech. IEEECHMT-7, 405 (1984).
D. FREAR, D. GRIVAS, M. MCCORMACK, D. TRIBULA and J. W. MORRIS Jr, in Proceedings of the Effect of Load and Thermal Histories on Mechanical Behaviour Symposium, edited by P. K. Liaw and T. Nicholas, 1987, p. 113.
H. S. RATHORE, R. C. YIH and A. R. EDENFIELD,J. Test Eval. 1 (1978) 170.
S. VAYNMAN, in Proceedings of the Intersociety Conference on Thermal Phenomena in Electronic System (I-Therm II) IEEE, 1990, p. 16.
H. D. SOLOMON, ASTM STP 942, edited by H. D. Solomon, G. R. Haiford, L. R. Kaisand and B. N. Leis, 1988, p. 342.
J. F. ECKEL,Proc. ASTM 51 (1957) 745.
H. L. BERNSTEIN, in “Low cycle fatigue and life predictions”, edited by C. Amzallag, P. Rabble and B. N. Leis (ASTM STP 770, Philadelphia, 1982) p. 105.
S. VAYNMAN and M. E. FINE, in Proceedings of the 2nd ASM International Electronic Materials and Processing Congress, edited by W. T. Shieh (1989) p. 255.
R. BERRICHE, S. VAYNMAN, M. E. FINE and D. A. JEANNOTTE, in Proceedings of the 3rd Annual Electronic Packaging and Corrosion in Microelectronics Conference, edited by M. E. Nicholson (ASM, International, 1987) p. 169.
P. J. GREENWOOD, T. C. REILEY, V. RAMAN and J. K. TIEN,Scripta Metall. 22 (1988) 1465.
H. D. SOLOMON, in 38th Electronic Components Conference, IEEE (1988) p. 7.
W. J. PLUMBRIDGE, in “High temperature fatigue properties and prediction”, edited by R. P. Skelton (Elsevier Applied Science, London, 1987) p. 117.
D. R. FREAR, in Proceedings of the 40th ECTC Conference Las Vegas, NV, 1990, p. 510.
L. R. LAWSON, M. E. FINE and D. A. JEANNOTTE, in Third International Conference on Fatigue and Fatigue Thresholds, Charlottesville, June 1987, edited by R. O. Ritchie and E. A. Starke (EMAS Ltd, UK, Vol II, 1987) p. 1143.
L. R. LAWSON, Ph.D. Thesis, North Western University (1989).
D. R. FREAR,IEEE Comp. Hybrid Manufact. Tech. IEEE CHMT-4, 1981, p. 492.
H. N. KELLER,ibid. (1981) p. 132.
L. P. KARJALAINAN, R. H. RAUTIOAHO, S. A. JARVENPAA, R. RIKOLA and J. VAHAKANGAS,Brazing and Soldering 15 (1988) 15, 37.
D. R. FREAR, in Proceedings of the 40th ECTC Conference, Las Vegas, NV (1990) p. 518.
P. L. HACKE, A. F. SPRECHER and H. CONRAD, in “Thermal stress and strain in microelectronics packaging”, edited by J. H. Lau (Van Nostrand Reinhold, New York, 1993) p. 467.
R. N. WILD,Welding Res. Suppl. 51 (1972) 521s.
W. M. WOLVERTON,Brazing and Soldering 16 (1987) 33.
D. TRIBULA, D. GRIVAS, D. R. FREAR and W. J. W. MORRIS Jr,Welding Res. Supp. (1989) 4045.
D. FREAR, D. GRIVAS and J. W. MORRIS Jr,J. Electr. Mater. 17 (1988) 171.
E. R. BANGS and R. E. BEAL,Welding Res. Suppl. (1975) 377s.
K. G. SCHMITT-THOMAS and S. WEGE,Brazing and Soldering 11 (1986) 27.
M. HARADA and R. SATOH, in Proceedings of the 40th ECTC Conference Las Vegas, NV (1990) p. 510.
D. R. FREAR, D. GRIVAS, and W. J. W. MORRIS Jr,J. Electr. Mater. 18 (1989) 671.
E. A. WRIGHT and W. M. WOLVERTON, in Proceedings of the 34th Electronics Components Conference34 (1984) 149.
R. P. SKELTON,Fatigue and Fracture of Engineering Materials and Structures 17 (1994) 479.
T. GOSWAMI and W. J. PLUMBRIDGE, in International Conference on Mechanical Behaviour, ICM 6, Japan (1991) p. 85.
R. M. SATOH, “Solder joint reliability, theory and applications”, edited by J. H. Lau (van Nostrand Reinhold, New York, 1991).
R. M. SATOH, K. OSHIMA and K. ARAKAWA, in Proceedings of the Conference of Japan Institute of Metals (1988) p. 144.
C. LAIRD and G. C. SMITH,Phil. Mag. 7 (1962) 847.
R. M. N. PELLOUX,Trans. Amer. Soc. Met. 61 (1969) 281.
H. D. SOLOMON, “Solder joint reliability, theory and applications”, edited by J. H. Lau (van Nostrand Reinhold, New York, 1991) p. 406.
P. K. LIAW, W. A. LOGAN and M. A. BURKE,Scripta Metall. 23 (1989) 747.
S. MAJUMDAR and W. B. JONES, “Solder mechanics — a state of the art assessment”, edited by D. R. Frear, W. B. Jones and K. R. Kinsman, p. 273.
S. SURESH and R. O. RITCHIE,Int. Metall. Rev. 29 (1984) 445.
Z. GUO, A. F. SPRECHER and H. CONRAD, in 41st Electronic Components and Technology Conference (1991) p. 658.
D. R. FREAR, “Solder mechanics — a state of the art assessment”, edited by D. R. Frear, W.B. Jones and K. R. Kinsman, p. 191.
H. D. SOLOMON,Trans. ASME,J. Electr. Packaging 111 (1989) 75.
S. VAYNMAN, in Proceedings of the 40th Electronic Components and Technology Conference, Las Vegas (1990) p. 505.
A. ZUBELEWICZ, R. BERRICHE, L. M. KEER and M. E. FINE,Trans. ASME, J. Electr. Packaging 111 (1989) 179.
W. ENGLEMAIER,IEEE Trans. CHMT 6 (1983) 232.
B. I. SANDOR, “Solder mechanics — a state of the art assessment”, edited by D. R. Frear, W. B. Jones and K. R. Kinsman, p. 363.
S. MAJUMDAR and P. S. MAIYA,Canadian Met. Q. 18 (1979) 57.
P. S. MAIYA and S. MAJUMDAR,Scripta Metall 13 (1979) 485.
J. W. MORRIS Jr and Z. MEI, “Solder mechanics — a state of the art assessment”, edited by D. R. Frear, W. B. Jones and K. R. Kinsman, p. 239.
M. FENNER,Electr. Prod. 24 (1995) 25.
T. J. KILINSKI, J. R. LESNIAK and B. I. SANDOR, “Solder joint reliability, theory and applications”, edited by J. H. Lau (van Nostrand Reinhold, New York, 1991) p. 384.
W. ENGELMAIER,IEPS (1984) 360.
C. A. HARPER, “Handbook of materials and processes for electronics” (McGraw-Hill, New York, 1970).
L. T. GREENFIELD and P. G. FORRESTER, “The Properties of Tin Alloys” (International Tin Research Institute, Publication No. 155, 1947).
G. V. CLATTERBAUGH and H. K. CHARLES Jr, in Proceedings of the 35th IEEE Electronic Components Conference, Washington DC (1985) p. 60.
E. E. KLUIZENAAR,Soldering and Surface Mount Technol. 4 (1990) 27.
C. G. SCMIDT, in Proceedings of the 39th Electronic Components Conference (1989) p. 253.
B. SUBRAHMANYAM,Trans. Japan Inst. Met. 13 (1975) 89.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Plumbridge, W.J. Solders in electronics. J Mater Sci 31, 2501–2514 (1996). https://doi.org/10.1007/BF00687275
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF00687275