Abstract
This paper presents a lower mobility parallel manipulator with fully decoupled motions. The proposed parallel manipulator has 3-DOF and can be utilized as a portable multi-axis CNC for parts assembly and light machining tasks that require large workspace and high dexterity. The manipulator consists of a moving platform that is connected to a fixed base by three pairwise orthogonal legs which are comprised of one cylinder, one revolute and one universal joint respectively. The mobility of the manipulator and structure of the inactive joint are analyzed. Kinematics of the manipulator including inverse kinematics, forward kinematics, and velocity equation are deduced. A design optimization is developed to seek the maximal workspace with particle swarm algorithm. This advantage has great potential for machine tools and coordinate measuring machine.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Wang, L.H., Nace, A.: A Sensor-Driven Approach to Web-based Machining. J. Intell. Manuf. 20, 1–14 (2009)
Arsenault, M., Gosselin, C.M.: Kinematic, Static and Dynamic Analysis of a Planar 2-DOF Tensegrity Mechanism. Mech. Mach. Theory 41, 1072–1089 (2006)
Zhang, D., Bi, Z., Li, B.: Design and Kinetostatic Analysis of a New Parallel Manipulator. Robot. Comput. Integr. Manuf. 25, 782–791 (2009)
Moon, Y.M.: Bio-mimetic Design of Finger Mechanism With Contact Aided Compliant Mechanism. Mech. Mach. Theory 42, 600–611 (2007)
Palmer, J.A., Dessent, B., Mulling, J.F., Usher, T., Grant, E., Eischen, J.W., Kingon, A.I., Franzon, P.D.: The Design and Characterization of a Novel Piezoelectric Transducer-Based Linear Motor. IEEE-ASME Trans. Mechatron. 13, 441–450 (2008)
Dong, W., Sun, L.N., Du, Z.J.: Design of a Precision Compliant Parallel Positioner Driven by Dual Piezoelectric Actuators. Sens. Actuator A. Phys. 135, 250–256 (2007)
Li, Y.M., Xu, Q.S.: A Novel Design and Analysis of a 2-DOF Compliant Parallel Micromanipulator for Nanomanipulation. IEEE Trans. Autom. Sci. Eng. 3, 248–253 (2006)
Ukidve, C.S., McInroy, J.E., Jafari, F.: Using Redundancy to Optimize Manipulability of Stewart Platforms. IEEE ASME Trans. Mechatron. 13, 475–479 (2008)
Fang, S.Q., Franitza, D., Torlo, M., Bekes, F., Hiller, M.: Motion Control of a Tendon-based Parallel Manipulator Using Optimal Tension Distribution. IEEE-ASME Trans. Mechatron. 9, 561–568 (2004)
Mitchell, J.H., Jacob, R., Mika, N.: Optimization of a Spherical Mechanism for a Minimally Invasive Surgical Robot: Theoretical and Experimental Approaches. IEEE Trans. Biomed. Eng. 53, 1440–1445 (2006)
Zhang, D., Wang, L.: Conceptual Development of an Enhanced Tripod Mechanism for Machine Tool. Robot. Comput.- Integr. Manuf. 21, 318–327 (2002)
Bi, Z.M., Lang, S.Y.T., Zhang, D., Orban, P.E., Verner, M.: An Integrated Design Toolbox for Tripod-based Parallel Kinematic Machines. J. Mech. Des. 129, 799–807 (2007)
Chanal, H., Bouzgarrou, B.C., Ray, P.: Stiffness Computation and Identification of Parallel Kinematic Machine Tools. Journal of Manufacturing Science and Engineering 131 (2009)
Ottaviano, E., Ceccarelli, M., Castelli, G.: Experimental Results of a 3-DOF Parallel Manipulator as an Earthquake Motion Simulator. In: ASME Conf. Proc. IDETC/CIE (2004)
He, G.P., Lu, Z.: The Research on the Redundant Actuated Parallel Robot with Full Compliant Mechanism. In: ASME Conf. Proc. MNC (2007)
Lessard, S., Bigras, P., Bonev, I.A.: A New Medical Parallel Robot and its Static Balancing Optimization. ASME Journal of Medical Devices 273, 272–278 (2007)
Zhang, D., Gao, Z., Song, B., Ge, Y.J.: Configuration Design and Performance Analysis of a Multidimensional Acceleration Sensor Based on 3RRPRR Decoupling Parallel Mechanism. In: Proc. IEEE Int. Conf. Decision Control, pp. 8304–8309 (2009)
Zhang, D.: Parallel Robotic Machine Tools. Springer, New York (2009)
Kong, X.W., Gosselin, C.M.: Type Synthesis of Parallel Mechanisms. Springer, New York (2007)
Gosselin, C.M., Masouleh, M.T., Duchaine, V., Richard, P.L., Foucault, S., Kong, X.W.: Parallel Mechanisms of the Multipteron Family: Kinematic Architectures and Benchmarking. In: IEEE International Conference on Robotics and Automation, pp. 555–560 (2007)
Merlet, J.P.: Parallel Robots, 2nd edn. Springer, Heidelberg (2006)
Tsai, L.W.: Robot Analysis: the Mechanics of Serial and Parallel Manipulators. Wiley, New York (1999)
Trelea, I.C.: The Particle Swarm Optimization Algorithm: Convergence Analysis and Parameter Selection. Information Processing Letters 85, 317–325 (2003)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2010 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Zhang, D., Gao, Z., Qian, J. (2010). Portable Multi-axis CNC: A 3-CRU Decoupled Parallel Robotic Manipulator. In: Liu, H., Ding, H., Xiong, Z., Zhu, X. (eds) Intelligent Robotics and Applications. ICIRA 2010. Lecture Notes in Computer Science(), vol 6424. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-16584-9_41
Download citation
DOI: https://doi.org/10.1007/978-3-642-16584-9_41
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-16583-2
Online ISBN: 978-3-642-16584-9
eBook Packages: Computer ScienceComputer Science (R0)