Abstract
The influence of torsion deformation on textures of cold drawing pearlitic steel wires was investigated by twisting the wires to different number of revolutions. Macro-texture (over the entire wire cross section) associated with torsion deformation was investigated by X-ray diffraction, while micro-texture (near the wire surface) was characterized by EBSD. The results show that the \( \left\langle { 1 10} \right\rangle \) macro-texture increases at the beginning of torsion and then decreases with increasing of torsion strain, while the \( \left\langle { 1 10} \right\rangle \) micro-texture decreases linearly with increasing of torsion strain. The relationships between the \( \left\langle { 1 10} \right\rangle \) fiber texture and the microhardness of the wires are also discussed.
Similar content being viewed by others
References
J.D. Embury, R.M. Fisher, Acta Metall. 4, 147 (1966)
G. Langford, Metall. Mater. Trans. A 8, 861 (1977)
M. Zelin, Acta Mater. 50, 4431 (2002)
X.D. Zhang, A. Godfrey, X. Huang, N. Hansen, Q. Liu, Acta Mater. 59, 3422 (2011)
N. Ridley, M.A. Malik, G.W. Lorimer, Mater. Charact. 25, 125 (1990)
J. Chance, N. Ridley, Metall. Mater. Trans. A 12, 1205 (1981)
K. Han, T.D. Mottishaw, G.D.W. Smith, D.V. Edmonds, A.G. Stacey, Mater. Sci. Eng., A 190, 207 (1995)
K. Han, D.V. Edmonds, G.D.W. Smith, Metall. Mater. Trans. A 32, 1313 (2001)
N. Guo, Q. Liu, J. Microsc. 246, 221 (2012)
S.E. Offerman, L.J.G.W. van Wilderen, N.H. van Dijk, J. Sietsma, MTh Rekveldt, S. van der Zwaag, Zhou. Sci. China Technol. Sci. 54, 2368 (2011)
K.K. Tang, Z.X. Li, J. Wang, Mater. Des. 32, 3299 (2011)
A. Haddi, A. Imad, G. Vega, Mater. Des. 32, 4310 (2011)
C.M. Bae, W.J. Nam, C.S. Lee, Scr. Mater. 35, 641 (1996)
N. Guo, B.F. Luan, Q. Liu, Mater. Des. 50, 285 (2013)
F. Yang, C. Ma, J.Q. Jiang, H.P. Feng, S.Y. Zhai, Scr. Mater. 59, 850 (2008)
P. Kumar, N.P. Gurao, A. Haldar, S. Suwas, ISIJ Int. 51, 679 (2011)
N. Guo, B.F. Luan, B.S. Wang, Q. Liu, Sci. China Technol. Sci. 56, 1139 (2013)
N. Guo, B. Song, B.F. Luan, Z.Q. Chen, Q. Liu, Sci. China Technol. Sci. 57, 796 (2014)
L.S. Tóth, J.J. Jonas, D. Daniel, R.K. Ray, Metall. Trans. A 21, 2985 (1990)
G. Langford, Metall. Trans. 1, 65 (1970)
H. Hu, Texture 1, 233 (1974)
Y.D. Liu, Y.D. Zhang, A. Tidu, L. Zuo, J. Mater. Sci. Technol. 23, 1010 (2012)
S. Suwas, R.K. Ray, in Crystallographic Texture of Materials, ed. by B. Derby (Springer, Heidelberg, 2014), p. 128
F. Montheillet, P. Gilormini, J. Jonas, Acta Metall. 33, 705 (1985)
X.D. Zhang, N. Hansen, Y.K. Gao, X. Huang, Acta Mater. 60, 5933 (2012)
Y. Kanesuki, Y. Hirai, R. Ogawa, ISIJ Int. 29, 687 (1989)
Acknowledgement
This work was financially supported by the National Natural Science Foundation of China (No. 50890170), the National Key Technology R&D Program of China (No. 2007BAE15B01) and the Fundamental Research Funds for the Central Universities of China (No. XDJK2013C088).
Author information
Authors and Affiliations
Corresponding author
Additional information
Available online at http://link.springer.com/journal/40195
Rights and permissions
About this article
Cite this article
Guo, N., Song, B., Wang, BS. et al. Influence of Torsion Deformation on Textures of Cold Drawing Pearlitic Steel Wires. Acta Metall. Sin. (Engl. Lett.) 28, 707–714 (2015). https://doi.org/10.1007/s40195-015-0251-7
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40195-015-0251-7