Abstract
Studies have indicated that 20–30 % HVAC system energy savings are achievable by recommissioning air handling units (AHU) to rectify faulty operation. Studies have also demonstrated that on-going commissioning of building systems for optimum efficiency can yield savings of an average of over 20 % of total energy cost. Automated fault detection and diagnosis (AFDD) is a process concerned with automating the detection of faults and their causes in physical systems. AFDD can be used to assist the commissioning process at multiple stages. This article presents a review of the research work that has been carried out on the use of AFDD tools in improving the efficiency of AHUs. This updates and expands upon the most recent literature review in this area, published in 2005. The article offers a comparative analysis of the FDD techniques currently in use and offers an opinion as to which show most potential for widespread adoption as part of the on-going commissioning process. It then details the issues which have impeded the adoption of existing AFDD tools for AHUs to date before concluding with an appraisal of current and recommended areas for future research to overcome the barriers to the widespread adoption of AFDD tools in AHUs.
Similar content being viewed by others
References
“BACnet Website.” (2011). Accessed December 6. http://www.bacnet.org/
Berton, A., & Hodouin, D. (2003). Linear and bilinear fault detection and diagnosis based on mass and energy balance equations. Control Engineering Practise, 11(1), 103–113. doi:10.1016/S0967-0661(02)00116-8.
CEN. “IS EN 16001.” (2010). NSAI. http://www.cen.eu/cen/News/PressReleases/Pages/EN16001.aspx.
Chen, Y., & Lan, L. (2010). Fault detection, diagnosis and data recovery for a real building heating/cooling billing system. Energy Conversion and Management, 51(5), 1015–1024. doi:10.1016/j.enconman.2009.12.004.
“DABO.” http://adms-tech.com/ongoing-commissioning software. Accessed 27 May 2013.
Choinière, D., Corsi, M. (2003). “A BEMS Assisted Commissioning Tool to Improve the Energy Performance of HVAC Systems.” In ICEBO. http://www.commissioning-hvac.org/files/doc/Choiniere__ICEBO.pdf
Djuric, N., & Novakovic, V. (2009). Review of possibilities and necessities for building lifetime commissioning. Renewable and Sustainable Energy Reviews, 13(2), 486–492. doi:10.1016/j.rser.2007.11.007.
Doukas, H., Nychtis, C., & Psarras, J. (2009). Assessing energy-saving measures in buildings through an intelligent decision support model. Building and Environment, 44(2), 290–298. doi:10.1016/j.buildenv.2008.03.006.
Doukas, H., Patlitzianas, K. D., Latropoulos, K., & Psarras, J. (2007). Intelligent building energy management system using rule sets. Building and Environment, 42(10), 3562–3569. doi:10.1016/j.buildenv.2006.10.024.
Du, Z., Jin, X., & Wu, L. (2007). Fault detection and diagnosis based on improved PCA with JAA method in VAV systems. Building and Environment, 42(9), 3221–3232. doi:10.1016/j.buildenv.2006.08.011.
Du, Z., Jin, X., & Yang, Y. (2009). Fault diagnosis for temperature, flow rate and pressure sensors in VAV systems using wavelet neural network. Applied Energy, 86(9), 1624–1631. doi:10.1016/j.apenergy.2009.01.015.
EVO. “IPMVP.” http://www.evo-world.org/index.php?option=com_content&view=article&id=272&Itemid=504&lang=en/. Accessed 14 September 2011.
Facility Dynamics. “PACRAT.” http://www.facilitydynamics.com/pacrat.html/. Accessed 13 September 2011
Ginestet, S., & Marchio, D. (2010). Retro and on-going commissioning tool applied to an existing building: operability and results of IPMVP. Energy, 35(4), 1717–1723. doi:10.1016/j.energy.2009.12.024.
Gordon, L. (2002). Modelling user acceptance of building management systems. Automation in Construction, 11(6), 695–705. doi:10.1016/S0926-5805(02)00010-9.
Han, H., Gu, B., Kang, J., & Li, Z. R. (2011a). Study on a hybrid SVM model for chiller FDD applications. Applied Thermal Engineering, 31(4), 582–592. doi:10.1016/j.applthermaleng.2010.10.021.
Han, H., Gu, B., Wang, T., & Li, Z. R. (2011b). Important sensors for chiller fault detection and diagnosis (FDD) from the perspective of feature selection and machine learning. International Journal of Refrigeration, 34(2), 586–599. doi:10.1016/j.ijrefrig.2010.08.011.
Hao, X., Zhang, G., & Chen, Y. (2005). Fault-tolerant control and data recovery in HVAC monitoring system. Energy and Buildings, 37(2), 175–180. doi:10.1016/j.enbuild.2004.06.023.
House, J. M., Vaezi-Nejad, H., Whitcomb, J. M. (2001). “An Expert Rule Set for Fault Detection in Air Handling Units.” Ashrae Transactions Part 1 (107). http://www.nist.gov/manuscript-publication-search.cfm?pub_id=860823
“HVAC Special Working Group – Spin III, 2009.” (2011). Accessed September 13. http://www.seai.ie/Your_Business/Large_Energy_Users/Special_Initiatives/Special_Working_Groups/HVAC_SWG_Spin3/
“HVAC SWG - Spin I, 2007.” (2011). Accessed September 13. http://www.seai.ie/Your_Business/Large_Energy_Users/Special_Initiatives/Special_Working_Groups/HVAC_SWG_07/
International Energy Agency. (1996). “Real-time HEVAC simulation”. 25
International Energy Agency. (2002). “Computer-aided evaluation of HVAC system performance” 34
International Energy Agency. (2006). “Commissioning of Building HVAC Systems for Improved Energy Performance”. 40.
International Energy Agency. (2010). “Cost-effective commissioning of existing and low energy buildings” 47.
ISO - International Organisation for Standardisation, and ISO - International Organisation for Standardisation. (2011). “ISO - International Organisation for Standardisation”. Text. Accessed September 13. http://www.iso.org/iso/catalogue_detail?csnumber=51297
“ISO 13381–1:2004 - Condition Monitoring and Diagnostics of Machines -- Prognostics -- Part 1: General Guidelines.” 2011. Accessed December 6. http://www.iso.org/iso/iso_catalogue/catalogue_tc/catalogue_detail.htm?csnumber=21841
Jang, W.-S., Healy, W. M., & Skibniewski, M. J. (2008). Wireless sensor networks as part of a web-based building environmental Monitoring system. Automation in Construction, 17(6), 729–736. doi:10.1016/j.autcon.2008.02.001.
Karlsson, M. (2011). The {MIND} method: a decision support for optimization of industrial energy systems—principles and case studies. Applied Energy, 88(3), 577–589. doi:10.1016/j.apenergy.2010.08.021.
Katipamula, S., & Brambley, M. R. (2005a). Review article: methods for fault detection, diagnostics, and prognostics for building systems—a review, Part I. HVAC&R Research, 11(1), 3–25. doi:10.1080/10789669.2005.10391123.
Katipamula, S., & Brambley, M. R. (2005b). Review article: methods for fault detection, diagnostics, and prognostics for building systems—a review, Part II. HVAC&R Research, 11(2), 169–187. doi:10.1080/10789669.2005.10391133.
Le, T. H., Knabe, G., & Henze, G. P. (2005). Fault Detection and Diagnosis for Control Strategies in Air Handling Units. Montreal: In IBPSA.
Lee, S. H., & Yik, F. W. H. (2010). A study on the energy penalty of various air-side system faults in buildings. International Conference on Building Energy and Environment (COBEE 2008), 42(1), 2–10. doi:10.1016/j.enbuild.2009.07.004.
Lee, S. Uk., Painter, F. L., Claridge, D. E. (2007) “Whole Building Commercial HVAC System Simulation for Use in Energy Consumption Fault Detection.” Ashrae Transactions 113 (Part 2).
Liang, J., & Du, R. (2007). Model-based fault detection and diagnosis of HVAC systems using support vector machine method. International Journal of Refrigeration, 30(6), 1104–1114. doi:10.1016/j.ijrefrig.2006.12.012.
Lo, C. H., Chan, P. T., Wong, Y. K., Rad, A. B., & Cheung, K. L. (2007). Fuzzy-genetic algorithm for automatic fault detection in HVAC systems. Applied Soft Computing, 7(2), 554–560. doi:10.1016/j.asoc.2006.06.003.
“LonMark International.” 2011. Accessed December 6. http://www.lonmark.org/
Mařík, K., Schindler, Z., & Stluka, P. (2008). Decision support tools for advanced energy management. Energy, 33(6), 858–873. doi:10.1016/j.energy.2007.12.004.
Matelli, J. A., Bazzo, E., & da Silva, J. C. (2011). Development of a case-based reasoning prototype for cogeneration plant design. Applied Energy, 88(9), 3030–3041. doi:10.1016/j.apenergy.2011.03.006.
Pakanen, J. E., & Sundquist, T. (2003). Automation-assisted fault detection of an air-handling unit; implementing the method in a real building. Energy and Buildings, 35(2), 193–202. doi:10.1016/S0378-7788(02)00050-6.
Pérez-Lombard, L., Ortiz, J., & Pout, C. (2008). A review on buildings energy consumption information. Energy and Buildings, 40(3), 394–398. doi:10.1016/j.enbuild.2007.03.007.
Piette, M. A., Kinney, S. K., & Haves, P. (2001). Analysis of an information monitoring and diagnostic system to improve building operations. Energy and Buildings, 33(8), 783–791. doi:10.1016/S0378-7788(01)00068-8.
Salsbury, T. I., & Diamond, R. C. (2001). Fault detection in HVAC systems using model-based feed forward control. Energy and Buildings, 33(4), 403–415. doi:10.1016/S0378-7788(00)00122-5.
Schein, J. (2006). “Results from Field Testing of Embedded Air Handling Unit and Variable Air Volume Box Fault Detection Tools”. NIST. http://fire.nist.gov/bfrlpubs/build06/art033.html
Schein, J., Bushby, S. T., Castro, N. S., & House, J. M. (2006). A rule-based fault detection method for air handling units. Energy and Buildings, 38(12), 1485–1492. doi:10.1016/j.enbuild.2006.04.014.
Seem, J. E. (2007). Using intelligent data analysis to detect abnormal energy consumption in buildings. Energy and Buildings, 39(1), 52–58. doi:10.1016/j.enbuild.2006.03.033.
Sikorska, J. Z., Hodkiewicz, M., & Ma, L. (2011). Prognostic modelling options for remaining useful life estimation by industry. Mechanical Systems and Signal Processing, 25(5), 1803–1836. doi:10.1016/j.ymssp.2010.11.018.
Song, Y.-h., Akashi, Y., & Yee, J.-J. (2008). A development of easy-to-use tool for fault detection and diagnosis in building air-conditioning systems. Energy and Buildings, 40(2), 71–82. doi:10.1016/j.enbuild.2007.01.011.
Wang, H., Chen, Y., Chan, C. W. H., & Qin, J. (2012a). An online fault diagnosis tool of VAV terminals for building management and control systems. Planning Future Cities-Selected Papers from the 2010 eCAADe Conference, 22(March), 203–211. doi:10.1016/j.autcon.2011.06.018.
Wang, H., Chen, Y., Chan, C. W. H., Qin, J., & Wang, J. (2012b). Online model-based fault detection and diagnosis strategy for VAV air handling units. Cool Roofs, Cool Pavements, Cool Cities, and Cool World, 55(December), 252–263. doi:10.1016/j.enbuild.2012.08.016.
Wang, H., Chai, T.-Y., Ding, J.-L., & Brown, M. (2009). Data driven fault diagnosis and fault tolerant control: some advances and possible new directions. Acta Automatica Sinica, 35(6), 739–747. doi:10.1016/S1874-1029(08)60093-2.
Wang, S., & Xiao, F. (2004). AHU sensor fault diagnosis using principal component analysis method. Energy and Buildings, 36(2), 147–160. doi:10.1016/j.enbuild.2003.10.002.
Wang, S., Zhou, Q., & Xiao, F. (2010). A system-level fault detection and diagnosis strategy for HVAC systems involving sensor faults. Energy and Buildings, 42(4), 477–490. doi:10.1016/j.enbuild.2009.10.017.
West, S. R., Yinh Guo, X., Wang, R., & Wall, J. (2011). Automated Fault Detection and Diagnosis of HVAC Subsystems Using Statistical Machine Learning. Sydney: IBPSA.
Wu, S., & Sun, J.-Q. (2011). Cross-level fault detection and diagnosis of building HVAC systems. Building and Environment, 46(8), 1558–1566. doi:10.1016/j.buildenv.2011.01.017.
Xiao, F., & Wang, S. (2009). Progress and methodologies of lifecycle commissioning of HVAC systems to enhance building sustainability. Renewable and Sustainable Energy Reviews, 13(5), 1144–1149. doi:10.1016/j.rser.2008.03.006.
Yang, H., Cho, S., Tae, C.-S., & Zaheeruddin, M. (2008). Sequential rule-based algorithms for temperature sensor fault detection in air handling units. Energy Conversion and Management, 49(8), 2291–2306. doi:10.1016/j.enconman.2008.01.029.
Yoshida, H., & Kumar, S. (2001). Development of {ARX} model based off-line {FDD} technique for energy efficient buildings. Renewable Energy, 22((1–3), 53–59. doi:10.1016/S0960-1481(00)00033-1.
Yoshida, H., Kumar, S., & Morita, Y. (2001). Online fault detection and diagnosis in VAV Air handling unit by RARX modelling. Energy and Buildings, 33(4), 391–401. doi:10.1016/S0378-7788(00)00121-3.
Yu, B., Dolf, H. C., Paassen, V., & Riahy, S. (2002). General modelling for model-based FDD on building HVAC system. Simulation Practise and Theory, 9(6–8), 387–397. doi:10.1016/S1569-190X(02)00062-X.
Zhu, Y., Jin, X., & Du, Z. (2012). Fault diagnosis for sensors in air handling unit based on neural network pre-processed by wavelet and fractal. Energy and Buildings, 44(January), 7–16. doi:10.1016/j.enbuild.2011.09.043.
Acknowledgments
This research was funded by Enterprise Ireland. The authors would like to thank the Innovation for Irelands Energy Efficiency (i2e2) Technology Centre.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Bruton, K., Raftery, P., Kennedy, B. et al. Review of automated fault detection and diagnostic tools in air handling units. Energy Efficiency 7, 335–351 (2014). https://doi.org/10.1007/s12053-013-9238-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12053-013-9238-2