Abstract
Osseointegrated dental implants are used to replace missing teeth. The success of implants is due to osseointegration or the direct contact of the implant surface and bone without a fibrous connective tissue interface. This review discusses the enhancement of osseointegration by means of anodized microporous titanium surfaces, functionally macroporous graded titanium coatings, nanoscale titanium surfaces, and different bioactive factors.
Similar content being viewed by others
References
S. Robert Davidoff, Implant Dentistry 2000, 9 (3), www.dental-implants.com/executive_summary.html
National Institutes of Health, Department of Health and Human Services. Bethesda, MD; http://grants.nih. gov/grants/guide/rfa-files/RFA-DE-06-007.html.
P.I. Branemark et al., Scandinavian Journal of Plastic and Reconstructive Surgery. 16 (1977), pp. 1–132.
T. Albrektsson et al., Acta Orthop. Scand., 52 (1981), pp. 155–170.
P.I. Branemark, G.A. Zarb, and T. Albrektsson, editors, Tissue Integrated Prostheses: Osseointegration in Clinical Dentistry (Chicago, IL: Quintessence, 1985), pp. 11–76.
R. Adell et al., International Journal of Oral Surgery, 10 (1981), pp. 387–416.
M. Nevins and B. Langer, Int. J. Oral Max. Impl., 8 (1993), pp. 423–428.
P.I. Branemark et al., Scandinavian Journal of Plastic and Reconstructive Surgery, 3 (1969), pp. 81–100.
M. Franchi et al., Micron. 36 (2005), pp. 630–644.
M. Franchi et al., Micron. 36 (2005), pp. 665–671.
Y. Zubery et al., Int. J. Periodont. Rest., 19 (4) (1999), pp. 343–353.
E. Hui et al., Clinical Oral Implant Dental Related Research, 3 (2) (2001), pp. 79–86.
M. Lorenzoni et al., Clin. Oral Implan. Res., 14 (2) (2003), pp. 180–187.
M.M. Klinger et al., Crit. Rev. Oral Biol. Med., 9 (4) (1998), pp. 449–463.
L.V. Carlsson et al., Biomaterials in Orthopedics, ed. M.J. Yaszemski et al. (New York: Marcel Dekker, Inc., 2004), pp. 223–240.
L.F. Cooper, T. Albrektsson, and B. Albrektsson, Acta Orthop. Scand. 58 (1987), pp. 567–577.
H. Kienafel et al., J. Arthroplasty, 14 (3) (1999), pp. 355–368.
K. Soballe et al., J. Orthop. Res., 10 (1992), pp. 285–299.
R.M. Pilliar, J.M. Lee, and C. Maniatopoulos, Clin. Orthop., 208 (1986), pp. 108–113.
J.E. Davies, Anatomical Record, 245 (1996), pp. 426–445.
J.E. Davies, Int. J. Prosthodont., 11 (1998), pp. 391–401.
J.E. Davies, Journal of Dental Education, 67 (2003), pp. 932–949.
J.E. Davies, B. Lowenberg, and A. Shiga, J. Biomed. Mater. Res., 24 (1990), pp. 1289–1306.
D.A. Puleo and A. Nanci, Biomaterials, 20 (1999), pp. 2311–2321.
M. Fini et al., Biomed. Pharmacother., 58 (2004), pp. 487–493.
M. Franchi et al., Biomaterials, 25 (2004), pp. 2239–2246.
M. Franchi et al., The Scientific World Journal, 4 (2004), pp. 1083–1095.
A. Ohtsu et al., J. Periodontol., 68 (1997), pp. 270–283.
J.B. Brunski, D.A. Puleo, and A. Nanci, Int. J. Oral Maxillofac. Implants, 15 (2000), pp. 15–46.
J. Breme, E. Steinhauser, and G. Paulus, Biomaterials, 9 (1988), pp. 310–313.
M. Browne and P.J. Gregson, Biomaterials 21 (2000), pp. 385–392.
D.F. Williams, Titanium in Medicine, ed. D.M. Brunette et al. (Berlin: Springer, 2001) pp. 13–24.
M. Niinomi, T. Hattori, and S. Niwa, Biomaterials in Orthopedics, ed. M.J. Yaszemski et al., (New York: Marcel Dekker, Inc., 2004), pp. 41–62.
X. Liu, P.K. Chu, and C. Ding, Mater. Sci. Engineer. R. 47 (2004), pp. 49–121.
M. Niinomi, Science and Technology of Advanced Materials, 4 (5) (2003), pp. 445–454.
Y. Yang, R. Cavin, and J.L. Ong, J. Biomed. Mater. Res. 67A (2003), pp. 344–349.
J.L. Ong et al., Appl. Surf. Sci., 72 (1993), pp. 7–13.
G.N. Raikar et al., J. Vac. Sci. Technol. A, 13 (1995), pp. 2633–2637.
D.E. MacDonald et al., Colloids Surf., B11 (1998), pp. 131–139.
K. Kawasaki et al., J. Dent. Res., 81 (2002), p. A-98.
J.L. Ong et al., J. Mater. Sci.-Mater. M., 6 (1995), pp. 113–119.
Y.T. Sul et al., Biomaterials, 23 (2002), pp. 491–501.
H. Zitter and H.J. Plenk, J. Biomed. Mater. Res., 21 (1987), pp. 881–896.
D.F. William, Ann. Rev. Mater. Sci., 6 (1976), pp. 237–265.
R.J. Solar, S.R. Pollack, and E. Korostoff, J. Biomed. Mater. Res. 13 (1979), pp. 217–250.
P. Tengvall and I. Lundstrom, Clin. Mater., 9 (1992), pp. 115–134.
Y. Yang, K. Bessho, and J.L. Ong, Biomaterials in Orthopedics, ed. M.J. Yaszemski et al. (New York: Marcel Dekker, Inc., 2004), pp. 401–423.
X. Liu et al., Surf. Coat. Technol., 186 (2004), pp. 227–233.
G. Deamaley, Nucl. Instrum. Meth. B: 50 (1–4) (1990), pp. 358–367.
P.S. Vanzillotta et al., Dent. Mater., 22 (3) (2006), pp. 275–282.
A. Vadiraj and M. Kamaraj, Materials Science and Engineering: A, 416 (1–2) (2006), pp. 253–260.
D.A. Armitage, D.M. Grant, Materials Science and Engineering: A, 349 (1–2) (2003), pp. 89–97.
K. Funatani, Surf. Coat. Tech., 133–134 (2000), pp. 264–272.
Y. Fu et al., Surf. Coat. Tech., 106 (2–3) (1998), pp. 193–197.
P.P. Binon, J. Biomed. Mater. Res., 15 (2000), pp. 76–94.
X. Liu, P.K. Chu, and C. Ding, Mater. Sci. Eng. R, 47 (2004), pp. 49–121.
L.F. Cooper et al., Biomaterials, 27 (6) (2006), pp. 926–936.
A. Citeau et al., Biomaterials, 26 (2) (2005), pp. 157–165.
A. Piattelli et al., Biomaterials, 24 (22) (2003), pp. 4081–4089.
H. Guleryuz and H. Cimenoglu, Surf. Coat. Tech., 192 (2–3) (2005), pp. 164–170.
S. Cho and K. Park, Biomaterials, 24 (20) (2003), pp. 3611–3617.
D. Buser et al., J. Biomed. Mater. Res., 25 (1991), pp. 889–902.
M. Wong et al., J. Biomed. Mater. Res., 29 (1995), pp. 1567–1575.
C. Larsson et al., Biomaterials, 17 (1996), pp. 605–616.
D.A. Deporter et al., Int. J. Oral Maxillofac. Implants, 16 (1996), pp. 87–95.
A. Vadiraj and M. Kamaraj, Surf. Coat. Tech., 200 (14–15) (2006), pp. 4538–4542.
K. Tanaka et al., J. Dent., 34 (4) (2006), pp. 277–282.
A. Shenhar et al., Materials Science and Engineering A, 268 (1–2) (1999), pp. 40–46.
P. Andreazza et al., Thin Solid Films, 319 (1–2) (1998), pp. 62–66.
W.L. Jaffe and D.F. Scott, J. Bone Joint Surg., 78A (1996), pp. 1918–1934.
K.A. Thomas, Orthopedics, 17 (1994), pp. 267–278.
R.J. Furlong and J.F. Osborn, J. Bone Joint Surg., 73B (1991), pp. 741–745.
R.G.T. Geesink, Clin. Orthop. Rel. Res., 395 (2002), pp. 53–65.
L.I. Havelin et al., Acta Orthop. Scand., 71 (2000), pp. 337–353.
Y. Yang and J.L. Ong, J. Biomed. Mater. Res., 64 (3) (2003), pp. 509–516.
Y. Yang, J.L. Ong, and J. Tian, Biomaterials, 24 (4) (2003), pp. 619–627.
Y. Yang et al., J. Biomed. Mater. Res., 52 (2000), pp. 333–337.
Y.S. Tian et al., Appl. Surf. Sci., 242 (1–2) (2005) pp. 177–184.
C. Langlade et al., Surf. Coat. Tech., 100–101 (1998), pp. 383–387.
M. Breznai et al., Biomaterials, 24 (23) (2003), pp. 4197–4203.
D. Rochefort et al., Surface Science, 595 (1–3) (2005), pp. 73–86.
J.R. Sobiecki, T. Wierzchon, and J. Rudnicki, Vacuum, 64 (1) (2001), pp. 41–46.
Y. Fu et al., Appl. Surf. Sci., 157 (3) (2000), pp. 167–177.
T. Czerwiec, H. Michel, and E. Bergmann, Surf. Coat. Tech., 108–109 (1–3) (1998), pp. 182–190.
Y. Yang, K. Kim, and J.L. Ong, Biometerials 26 (2005), pp. 327–337.
Y. Yang et al., Journal of Oral Implantology, 29 (6) (2003), pp 270–277.
Y. Yang, et al., Biomaterials, 24 (2003), pp. 5131–5137.
Y. Yang et al., J. Dent. Res., 82 (2003), pp. 833–837.
J.G.C. Wolke et al., J. Biomed. Mater. Res., 28 (1994), pp. 1477–1484.
K. van Dijk et al., J. Biomed. Mater. Res., 29 (1995), pp. 269–276.
K. van Dijk et al., Biomaterials, 17 (1996), pp. 405–410.
Y. Yang et al., J. Biomed. Mater. Res., 55 (2001), pp. 442–444.
Y.Z. Liu et al., Nucl. Instrum. Meth. B., 237 (3–4) (2005), pp. 543–549.
X.M. Zhu and M.K. Lei, Current Applied Physics, 5 (5) (2005), pp. 522–525.
S. Mändl, J.W. Gerlach, and B. Rauschenbach, Surf. Coat. Tech., 196 (1–3) (2005), pp. 293–297.
T. Mano et al., Nucl. Instrum. Meth. B., 232 (1–4) (2005), pp. 223–227.
L. Tan and W.C. Crone, Thin Solid Films, 472 (1–2) (2005), pp. 282–290.
E. Leitão, R.A. Silva, and M.A. Barbosa, Corros. Sci., 39 (2) (1997), pp. 377–383.
T.M. Muraleedharan and E.I. Meletis, Thin Solid Films, 221 (1–2) (1992), pp. 104–113.
G. Dearnaley, Nucl. Instrum. Meth. B. 50 (1–4) (1990), pp 358–367.
S. Mändl et al., Biomolecular Engineering, 19 (2–6) (2002), pp. 129–132.
J. Yan et al., J. Prosthet. Dent., 71 (3) (1994), pp. 289–294.
K. Bessho et al., Clinical Oral Implants Res., 10 (1999), pp. 212–218.
J.L. Ong et al., Int. J. Oral Maxillofac. Implants, 12 (1997), pp. 649–654.
Y. Yang, R. Cavin, and J.L. Ong, J. Biomed. Mater. Res., 67A (2003), pp. 344–349.
Y. Yang, R. Glover, and J.L. Ong, Colloid Surface. B, 30 (2003), pp. 291–297.
A. Satsangi et al., Biomaterials, 24 (2003), pp. 4585–4589.
D.A. Puleo, R.A. Kissling, and M.-S. Sheu, Biomaterials, 23 (9) (2002), pp. 2079–2087.
R. Müller et al., Biomaterials, 27 (22) (2006), pp. 4059–4068.
Y. Ku, C. Chung, and J. Jang, Biomaterials, 26 (25) (2005), pp. 5153–5157.
D.M. Ferris et al., Biomaterials, 20 (23–24) (1999), pp. 2323–2331.
G. Giavaresi et al., Biomaterials, 24 (9) (2003), pp. 1583–1594.
H. Zreiqat et al., Biomaterials, 26 (36) (2005), pp. 7579–7586.
S. Spriano et al., Biomaterials, 26 (11) (2005), pp. 1219–1229.
T.M. Lee, E. Chang, and C.Y. Yang, Biomaterials, 25 (1) (2004), pp. 23–32.
E. Chang and T.M. Lee, Biomaterials, 23 (14) (2002), pp. 2917–2925.
C. Eriksson, H. Nygren, and K. Ohlson, Biomaterials, 25 (19) (2004), pp. 4759–4766.
A. Piattelli, et al., Biomaterials, 24 (22) (2003), pp. 4081–4089.
R.M. Pilliar, Bio-implant Interface, Improving Material and Tissue Reaction, ed. J.E. Ellingsen and S.P. Lyngstadadaas (Boca Raton, FL: CRC Press, 2003), pp. 43–58.
J.L. Ong et al., JOM, in this issue.
G. Giavaresi et al., J. Biomed. Mater. Res., 67 (2003), pp. 112–120.
G. Giavaresi et al., Biomaterials, 25 (2004), pp. 5583–5591.
K. Kim et al., Journal of Oral Implantology, 32 (2006), pp. 8–13.
W. Son et al., J. Biomed. Mater. Res. Part B: Applied Biomaterials, 66B (2003), pp. 520–525.
X. Zhu et al., J. Mater. Sci.-Mater. M., 14 (7) (2003), pp. 629–643.
S. Park et al., J. Dent. Res. (Abstract#2083), 83: Spec. Iss. A (2004).
J.Y. Martin et al., J. Biomed. Mater. Res., 29 (1995), pp. 389–401.
C.M. Stanford, J.C. Keller, and M. Solursh, J. Dent. Res., 73 (1994), pp. 1061–1071.
K. Anselme et al., J. Biomed. Mater. Res., 60 (2002), pp. 529–540.
V. Borsari et al., Biomaterials, 26 (2005), pp. 4948–4955.
K.H. Frosch et al., J. Orthopaed. Res., 21 (2) (2003), pp. 213–223.
M.L. Escudero et al., Intermetallics, 12 (3) (2004), pp. 253–260.
M. Niinomi, Biomaterials, 24 (16) (2003), pp. 2673–2683.
ASTM designation F2066-01, Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (Philadelphia, PA: ASTM, 2001), pp. 1605–1608.
ASTM designation draft #3, Standardization Specification for Wrought Titanium-35Niobium-7Zirconium-5Tantalum Alloy for Surgical Implant Applications (UNS R58350) (Philadelphia, PA: ASTM, 2000).
A.K. Mishra et al., Medical Applications of Titanium and Its Alloys, STP 1272, ed. S.A. Brown and J.E. Lemons (West Conshohocken, PA: ASTM, 1996), pp. 96–113.
I. Oh, N. Nomura, and S. Hanada, Mater. T. JIM, 43 (3) (2002), pp. 443–446.
A.J. Clemow et al., J. Biomed. Mater. Res., 15 (1981), pp. 73–82.
Y. Yang, J.L. Ong, and J. Tian, Materials Science and Engineering: C 120 (2002), pp. 117–124.
Y. Yang et al., Encyclopedia of Biomaterials and Biomedical Engineering 1 (EBBE), vol. 1, ed. G. Wnek and G. Bowlin, (New York: Marcel Dekker, Inc., 2006), www.dekker.com/sdek/abstract~db=enc~content=a713618162
N.C. Blumenthal and V. Cosma, J. Biomed. Mater. Res., 23 (1989), pp. 13–22.
B. Kasemo, J. Prosthet. Dent., 49 (1983), pp. 832–837.
G. Chen, X. Wen, and N. Zhang, Biomed. Mater. Eng., 8 (1998), pp. 61–74.
M.M. Stevens and J.H. George, Science, 310 (2005), pp. 1135–1138.
D.E. Discher, P. Janmey, and Y. Wang, Science, 310 (2005), pp. 1139–1143.
R.G. Flemming et al., Biomaterials, 20 (1999), pp. 573–588.
N. Oh et al., Abstract #2011 (Presentation at the ADEA/AADR/CADR Meeting and Exhibition, American Association of Dental Research, Orlando, FL, 8–11 March 2006).
R.L. Price et al., J. Biomed. Mater. Res., 67A (2003), pp. 1284–1293.
T.J. Webster et al., Biomaterials, 21 (2000), pp. 1803–1810.
Y. Liu et al., Abstract #2012 (Presentation at the ADEA/AADR/CADR Meeting and Exhibition, American Association of Dental Research, Orlando, FL, 8–11 March 2006).
M. Moore et al., Abstract #2010 (Presentation at the ADEA/AADR/CADR Meeting and Exhibition, American Association of Dental Research, Orlando, FL, 8–11 March 2006).
S.J. Xiao et al., Langmuir, 14 (1998), pp. 5507–5516.
A.L. Linsebigler, G. Lu, and J.Y. Yates, Jr., Chem. Rev., 95 (1995), pp. 735–758.
Y. Iwasaki and N. Saito, Colloid. Surf. B, 32 (2003), pp. 77–84.
M. Advincula et al., Colloid. Surf B, 42 (1) (2005). pp. 29–43.
S. Tosatti et al., Biomaterials, 24 (2003), pp. 4949–4958.
D.M. Ferris et al., Biomaterials, 20 (23–24) (1999), pp. 2323–2331.
A.H.A. Kurth et al., Bone, 37 (2) (2005), pp. 204–210.
J.D. Bumgardner et al., J. Biomat. Science-Polymer E., 14 (2003), pp. 1401–1410.
J.D. Bumgardner et al., J. Biomat. Science-Polymer E., 14 (2003), pp. 423–438.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Yang, Y., Oh, N., Liu, Y. et al. Enhancing osseointegration using surface-modified titanium implants. JOM 58, 71–76 (2006). https://doi.org/10.1007/s11837-006-0146-1
Issue Date:
DOI: https://doi.org/10.1007/s11837-006-0146-1