Abstract
The basic properties of magnesium alloys suggest that they would readily find use in bicycles. Magnesium alloys have low density and a high strength-to-weight ratio, are readily extrudable, and some alloys are highly weldable. A lack of information about wrought magnesium alloys, a lack of suppliers to complete the production process, and a lack of information in how to set up a manufacturing plant to process wrought magnesium alloys have contributed to only limited market penetration by magnesium into bicycle applications. This article examines what has worked and what has not in the use of magnesium alloys in the bicycle business.
Similar content being viewed by others
References
M.M. Avadesian and Hugh Baker, editors, Magnesium and Magnesium Alloys, ASM Specialty Handbook (Materials Park, OH: ASM International, 1999), p. 17.
www.litech-mg.ru/company.html.
R.S. Busk, Magnesium Products Design (New York: Marcel Dekker, 1986), p. 14.
J.A. Gusak and D.E. Ritzema, “Magnesium in Focus,” Proceedings of the Magnesium Association (Wauconda, IL: International Magnesium Association, 1961).
Aerospace Structural Metals Handbook Nonferrous Alloys (February 2000).
R.N. Lumley, I.J. Polmear, and A.J. Morton, “Interrupted Ageing and Secondary Precipitation in Aluminium Alloys,” Materials Science and Technology, 19 (11) (2003), pp. 1483–1490.
Author information
Authors and Affiliations
Additional information
For more information, contact Josh Deetz, Magnesium Manufacturing Consultants, Taiwan; josh@deetz.com.
Rights and permissions
About this article
Cite this article
Deetz, J. The use of wrought magnesium in bicycles. JOM 57, 50–53 (2005). https://doi.org/10.1007/s11837-005-0096-z
Issue Date:
DOI: https://doi.org/10.1007/s11837-005-0096-z