Skip to main content

Advertisement

SpringerLink
Log in

Incorporating a non-reactive heavy metal simulation module into SWAT model and its application in the Athabasca oil sands region

  • Research Article
  • Published:
Environmental Science and Pollution Research Aims and scope Submit manuscript

Abstract

Heavy metal contaminations in an aquatic environment is a serious issue since the exposure to toxic metals can cause a variety of public health problems. A watershed-scale model is a useful tool for predicting and assessing heavy metal fate and transport in both terrestrial and aquatic environments. In this study, we developed a simulation module for non-reactive heavy metals and incorporated it into the widely used Soil Water Assessment Tool (SWAT) model. The simulated processes in the developed model include heavy metal deposition, partitioning in soil and water, and transport by different pathways in both terrestrial and aquatic environments. Three-phase partitioning processes were considered in the module by simulating heavy metals portioning to dissolved organic carbon in the soil and stream. This developed module was used for watershed-scale simulation of heavy metal processes in the Muskeg River watershed (MRW) of the Athabasca oil sands region in western Canada for the first time. The daily streamflow and sediment load from 2015 to 2017 were first calibrated and validated. Subsequently, the daily Lead and Copper loads at the outlet station were used for heavy metal calibration and validation. The performances for the daily heavy metal loads simulation during the whole simulation period can be considered as “satisfactory” based on the recommended model performance criteria with the Nash-Sutcliffe efficiency as 0.41 and 0.71 for Pb and Cu loads, respectively. The simulation results indicate that the spring and summer are hot moments for heavy metal transport and the snowmelt in spring and rainfall runoff events in summer are the main driving forces for the metal transport in the MRW. We believe the developed model can be a useful tool for simulating the fate and transport of non-reative heavy metals at watershed scale and further used to assess management scenarios for mitigating heavy metal pollution in the Athabasca oil sands region.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4

Similar content being viewed by others

References

  • Abbaspour KC (2013) SWAT-CUP 2012: SWAT calibration and uncertainty programs–a user manual. Eawag: Dübendorf, Switzerland, p 103

    Google Scholar 

  • Abraham MR, Susan TB (2017) Water contamination with heavy metals and trace elements from Kilembe copper mine and tailing sites in Western Uganda; implications for domestic water quality. Chemosphere 169:281–287

    Article  CAS  Google Scholar 

  • Allison, J.D., Allison, T.L., 2005. Partition coefficients for metals in surface water, soil, and waste. Rep. EPA/600/R-05 74.

    Google Scholar 

  • Arnold JG, Moriasi DN, Gassman PW, Abbaspour KC, White MJ, Srinivasan R, Santhi C, Harmel R, Van Griensven A, Van Liew MW (2012) SWAT: model use, calibration, and validation. Trans ASABE 55:1491–1508

    Article  Google Scholar 

  • Boithias L, Srinivasan R, Sauvage S, Macary F, Sánchez-Pérez JM (2014) Daily nitrate losses: implication on long-term river quality in an intensive agricultural catchment of southwestern France. J Environ Qual 43:46–54

    Article  CAS  Google Scholar 

  • Chen H, Luo Y, Potter C, Moran PJ, Grieneisen ML, Zhang M (2017) Modeling pesticide diuron loading from the San Joaquin watershed into the Sacramento-San Joaquin Delta using SWAT. Water Res 121:374–385

    Article  CAS  Google Scholar 

  • Dile YT, Srinivasan R (2014) Evaluation of CFSR climate data for hydrologic prediction in data-scarce watersheds: an application in the Blue Nile River Basin. J Am Water Resour As 50:1226–1241

    Article  Google Scholar 

  • Du X, Li X, Zhang W, Wang H (2014) Variations in source apportionments of nutrient load among seasons and hydrological years in a semi-arid watershed: GWLF model results. Environ Sci Pollut Res 21:6506–6515

    Article  CAS  Google Scholar 

  • Du X, Su J, Li X, Zhang W (2016) Modeling and evaluating of non-point source pollution in a semi-arid watershed: implications for watershed management. CLEAN–Soil, Air, Water 44:247–255

    Article  CAS  Google Scholar 

  • Du X, Shrestha NK, Ficklin DL, Wang J (2018) Incorporation of the equilibrium temperature approach in a Soil and Water Assessment Tool hydroclimatological stream temperature model. Hydrol Earth Syst Sci 22:2343–2357

    Article  Google Scholar 

  • Du X, Shrestha NK, Wang J (2019) Integrating organic chemical simulation module into SWAT model with application for PAHs simulation in Athabasca oil sands region, Western Canada. Environ Model Softw 111:432–443

    Article  Google Scholar 

  • Galván L, Olías M, de Villarán RF, Santos JD, Nieto J, Sarmiento A, Cánovas C (2009) Application of the SWAT model to an AMD-affected river (Meca River, SW Spain). Estimation of transported pollutant load. J Hydrol 377:445–454

    Article  CAS  Google Scholar 

  • Grizzetti B, Bouraoui F, Granlund K, Rekolainen S, Bidoglio G (2003) Modelling diffuse emission and retention of nutrients in the Vantaanjoki watershed (Finland) using the SWAT model. Ecol Model 169:25–38

    Article  CAS  Google Scholar 

  • Hashim MA, Mukhopadhyay S, Sahu JN, Sengupta B (2011) Remediation technologies for heavy metal contaminated groundwater. J Environ Manag 92:2355–2388

    Article  CAS  Google Scholar 

  • Huang R, McPhedran KN, Yang L, El-Din MG (2016) Characterization and distribution of metal and nonmetal elements in the Alberta oil sands region of Canada. Chemosphere 147:218–229

    Article  CAS  Google Scholar 

  • Jiao W, Ouyang W, Hao F, Huang H, Shan Y, Geng X (2014) Combine the soil water assessment tool (SWAT) with sediment geochemistry to evaluate diffuse heavy metal loadings at watershed scale. J Hazard Mater 280:252–259

    Article  CAS  Google Scholar 

  • Kashyap S, Dibike Y, Shakibaeinia A, Prowse T, Droppo I (2017) Two-dimensional numerical modelling of sediment and chemical constituent transport within the lower reaches of the Athabasca River. Environ Sci Pollut Res 24:2286–2303

    Article  CAS  Google Scholar 

  • Kelly EN, Schindler DW, Hodson PV, Short JW, Radmanovich R, Nielsen CC (2010) Oil sands development contributes elements toxic at low concentrations to the Athabasca River and its tributaries. Proc Natl Acad Sci 107:16178–16183

    Article  Google Scholar 

  • Kim M, Boithias L, Cho KH, Silvera N, Thammahacksa C, Latsachack K, Rochelle-Newall E, Sengtaheuanghoung O, Pierret A, Pachepsky YA (2017) Hydrological modeling of fecal indicator bacteria in a tropical mountain catchment. Water Res 119:102–113

    Article  CAS  Google Scholar 

  • Kirk JL, Muir DC, Gleason A, Wang X, Lawson G, Frank RA, Lehnherr I, Wrona F (2014) Atmospheric deposition of mercury and methylmercury to landscapes and waterbodies of the Athabasca oil sands region. Environ Sci Technol 48:7374–7383

    Article  CAS  Google Scholar 

  • Knightes CD, Golden HE, Journey CA, Davis GM, Conrads PA, Marvin-DiPasquale M, Brigham ME, Bradley PM (2014) Mercury and methylmercury stream concentrations in a Coastal Plain watershed: A multi-scale simulation analysis. Environ Pollut 187:182–192

    Article  CAS  Google Scholar 

  • Krause P, Boyle D, Bäse F (2005) Comparison of different efficiency criteria for hydrological model assessment. Adv Geosci 5:89–97

    Article  Google Scholar 

  • Krishnan N, Raj C, Chaubey I, Sudheer K (2018) Parameter estimation of SWAT and quantification of consequent confidence bands of model simulations. Environ Earth Sci 77:470

    Article  Google Scholar 

  • Kurek J, Kirk JL, Muir DC, Wang X, Evans MS, Smol JP (2013) Legacy of a half century of Athabasca oil sands development recorded by lake ecosystems. Proc Natl Acad Sci 110:1761–1766

    Article  Google Scholar 

  • Leeabai N, Leungprasert S, Sirivittayaprakron S (2016) Organic pollutants and heavy metals transport in the lower Chaophraya Basin using SWAT model. Int J Manag Appl Sci 4:21–25

    Google Scholar 

  • Ligaray M, Baek SS, Kwon H-O, Choi S-D, Cho KH (2016) Watershed-scale modeling on the fate and transport of polycyclic aromatic hydrocarbons (PAHs). J Hazard Mater 320:442–457

    Article  CAS  Google Scholar 

  • Meng Y, Zhou L, He S, Lu C, Wu G, Ye W, Ji P (2018) A heavy metal module coupled with the SWAT model and its preliminary application in a mine-impacted watershed in China. Sci Total Environ 613:1207–1219

    Article  CAS  Google Scholar 

  • Moriasi DN, Gitau MW, Pai N, Daggupati P (2015) Hydrologic and water quality models: performance measures and evaluation criteria. Trans ASABE 58:1763–1785

    Article  Google Scholar 

  • Neitsch SL, Arnold JG, Kiniry JR, Williams JR (2011) Soil and water assessment tool theoretical documentation version 2009. Water Resources Institute, Texas

    Google Scholar 

  • Niraula R, Kalin L, Srivastava P, Anderson CJ (2013) Identifying critical source areas of nonpoint source pollution with SWAT and GWLF. Ecol Model 268:123–133

    Article  CAS  Google Scholar 

  • Shakibaeinia A, Dibike YB, Kashyap S, Prowse TD, Droppo IG (2017) A numerical framework for modelling sediment and chemical constituents transport in the Lower Athabasca River. J Soils Sediments 17:1140–1159

    Article  CAS  Google Scholar 

  • Shrestha NK, Wang J (2018) Predicting sediment yield and transport dynamics of a cold climate region watershed in changing climate. Sci Total Environ 625:1030–1045

    Article  CAS  Google Scholar 

  • Skierszkan EK, Irvine G, Doyle JR, Kimpe LE, Blais JM (2013) Is there widespread metal contamination from in-situ bitumen extraction at Cold Lake, Alberta heavy oil field? Sci Total Environ 447:337–344

    Article  CAS  Google Scholar 

  • Wongsasuluk P, Chotpantarat S, Siriwong W, Robson M (2014) Heavy metal contamination and human health risk assessment in drinking water from shallow groundwater wells in an agricultural area in Ubon Ratchathani province, Thailand. Environ Geochem Health 36:169–182

    Article  CAS  Google Scholar 

  • Wool TA, Ambrose RB, Martin JL, Comer EA, Tech T (2006) Water quality analysis simulation program (WASP). User’s Manual. Version 6

  • Zhang X, Srinivasan R, Debele B, Hao F (2008) Runoff simulation of the headwaters of the Yellow River using the SWAT model with three snowmelt algorithms. J Am Water Resour As 44:48–61

    Article  Google Scholar 

  • Zhang X, Izaurralde RC, Arnold JG, Williams JR, Srinivasan R (2013) Modifying the soil and water assessment tool to simulate cropland carbon flux: model development and initial evaluation. Sci Total Environ 463:810–822

    Article  CAS  Google Scholar 

Download references

Acknowledgments

The authors would like to thank the Alberta Economic Development and Trade for the Campus Alberta Innovates Program Research Chair (No. RCP-12-001-BCAIP).

Author information

Authors and Affiliations

  1. Athabasca River Basin Research Institute (ARBRI), Athabasca University, Alberta, Canada

    Xinzhong Du, Narayan Kumar Shrestha & Juyne Wang

Authors
  1. Xinzhong Du
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Narayan Kumar Shrestha
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Juyne Wang
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Juyne Wang.

Additional information

Responsible editor: Marcus Schulz

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Electronic supplementary material

ESM 1

(DOCX 190 kb)

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Du, X., Shrestha, N.K. & Wang, J. Incorporating a non-reactive heavy metal simulation module into SWAT model and its application in the Athabasca oil sands region. Environ Sci Pollut Res 26, 20879–20892 (2019). https://doi.org/10.1007/s11356-019-05334-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11356-019-05334-4

Keywords

Search

Navigation