Skip to main content
Log in

A 1 V power amplifier for 81–86 GHz E-band

  • Published:
Analog Integrated Circuits and Signal Processing Aims and scope Submit manuscript

Abstract

The design and layout of a two stage SiGe E-band power amplifier using a stacked transformer for output power combination is presented. In EM-simulations with ADS Momentum, at E-band frequencies, the power combiner consisting of two individual single turn transformers performs significantly better than a single 2:1 transformer with two turns on the secondary side. Imbalances in the stacked transformer structure are reduced with tuning capacitors for maximum gain and output power. At 84 GHz the simulated loss of the stacked transformer is as low as 1.35 dB, superseding the performance of an also presented alternative power combiner. The power combination allows for a low supply voltage of 1 V, which is beneficial since the supply can then be shared between the power amplifier and the transceiver, thereby eliminating the need of a separate voltage regulator. To improve the gain of the two-stage amplifier it employs a capacitive cross-coupling technique not yet seen in mm-wave SiGe PAs. Capacitive cross-coupling is an effective technique for gain enhancement but is also sensitive to process variations as shown by Monte Carlo simulations. To mitigate this two alternative designs are presented with the cross coupling capacitors implemented either with diode coupled transistors or with varactors. The PA is designed in a SiGe process with f T  = 200 GHz and achieves a power gain of 12 dB, a saturated output power of 16 dBm and a 14 % peak PAE. Excluding decoupling capacitors it occupies a die area of 0.034 mm2.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20
Fig. 21
Fig. 22
Fig. 23
Fig. 24
Fig. 25
Fig. 26
Fig. 27
Fig. 28

Similar content being viewed by others

References

  1. Wells, J. (2009). Faster than fiber: The future of multi-Gb/s wireless. IEEE Microwave Magazine, 10(3), 104–112.

    Article  Google Scholar 

  2. Sun, Y., Fischer, G. G., & Scheytt, J. C. (2012). A compact linear 60 GHz PA with 29.2 % PAE operating at weak avalanche area in SiGe. IEEE Transactions on Microwave Theory and Techniques, 60(8), 2581–2589.

    Article  Google Scholar 

  3. Asada, H., Matsushita, K., Bunsen, K., Okada, K., & Matsuzawa, A. (2011). A 60 GHz CMOS power amplifier using capacitive cross-coupling neutralization with 16 % PAE. In Proceedings of the 6th European Microwave Integrated Circuits Conference.

  4. Can, W. L., Long, R., Spirito, M., & Pekarik, J. J. (2009). A 60 GHz-Band 1 V 11.5 dBm Power Amplifier with 11 % PAE in 65 nm CMOS. In International Solid-State Circuits Conference 2009.

  5. Van der Heijden, M. P., Spirito, M., de Vreede, L. C. N., Van Straten, F., & Burghartz, J. N. (2003). A 2 GHz high-gain differential InGaP HBT driver amplifier matched for high IP3. In Microwave Symposium Digest, IEEE MTT-S International.

  6. Long, J. (2000). Monolithic Transformers for Silicon RF IC Design. IEEE Journal of Solid-State Circuits, 35(9), 1368–1382.

    Article  Google Scholar 

  7. Tired, T., Sjöland, H., Bryant, C., & Törmänen, M. (2011) A 1 V SiGe Power Amplifier for 81-86 GHz E-band.In IEEE Norchip conference.

  8. Zhao, Y., Long, J. R., & Spirito, M. (2010). Compact transformer power combiners for millimeter-wave wireless applications. In IEEE Radio Frequency Integrated Circuits Symposium.

  9. Giammello, V., Ragonese, E., & Palmisano, G. (2011). A 15-dBm SiGe BiCMOS PA for 77-GHz Automotive radar. IEEE Transactions on Microwave Theory and Techniques, 59(11), 2910–2918.

    Article  Google Scholar 

  10. Zhao, Y., Long, J. R., Spirito, M., & Akhnoukh, A. B. (2011). A +18dBm, 79–87.5 GHz bandwidth power amplifier in 0.13 μm SiGe-BiCMOS. IEEEBipolar/BiCMOS Circuits and Technology Meeting (BCTM), 2011, 17–20.

    Google Scholar 

  11. Yishay, R. B., Carmon, R., Katz, O., Sheinman, B., & Elad, D. (2012). A 20 dBm E-band power amplifier in SiGe BiCMOS technology. In European Microwave Conference (EuMC), (pp. 1079–1082).

  12. Demirel, N., Kerhervé, E., Plana, R., & Pache, D. (2010). 79GHz BiCMOS single-ended and differential power amplifiers. In European Microwave Integrated Conference (EuMIC), 2010 European (pp. 1690–1693).

  13. Komijani, A., & Hjimiri, A. (2006). A wideband 77 GHz, 17.5 dBm fully integrated power Amplifier in silicon. IEEE Journal of Solid-State Circuits, 41(8), 1749–1756.

    Article  Google Scholar 

  14. Nicolson, S. T., Yau, K., Pruvost, S., Danelon, V., Chevalier, P., Garcia, P., et al. (2008). A low voltage SiGe BiCMOS 77-GHz automotive radar chipset. IEEE Transactions on Microwave Theory Technology, 56(5), 10092–11103.

    Article  Google Scholar 

Download references

Acknowledgments

The author would like to thank the Swedish government funding agency Vinnova, the System Design on Silicon (SoS) excellence center and Infineon Technologies for sponsoring this project.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Tobias Tired.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Tired, T., Sjöland, H., Bryant, C. et al. A 1 V power amplifier for 81–86 GHz E-band. Analog Integr Circ Sig Process 80, 335–348 (2014). https://doi.org/10.1007/s10470-014-0338-5

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10470-014-0338-5

Keywords

Navigation