Abstract
Cationic latexes were prepared through emulsion copolymerization of styrene (St) and butyl acrylate (BA) with a cationic surfactant, cetyl trimethyl ammonium bromide (CTAB). Latex properties, including particle size, size distribution, potential, surface tension and monomer conversion, were determined for latexes prepared with different CTAB amounts. Evolution of these properties during emulsion polymerization was followed in order to understand the mechanism of the particles formation. Results showed that both particle size and potential were function of polymerization time and latex solids. Parallel emulsion polymerizations with cationic, anionic charged initiator and charge-free initiators were also carried out, the latex properties were determined at different polymerization time. All these results were attentively interpreted based on the mechanisms of emulsion polymerization, surfactant adsorption and latex particle stabilization.
Similar content being viewed by others
References
Harkins, W.D., J. Am. Chem. Soc., 1947, 69: 1428
Xu, Z., Zhang, J. and Cheng, S., J. Funct. Polym., 1995, 8(4): 512
Zhang, J., Cheng, S., Li, X., Gu, S. and Zou, Q., Polym. Mater. Sci. Eng., 2002, 18(6): 18
Li, J. and Qiu, H., China Pulp. Paper., 2004, 23(4): 41
Exner, R., Paper. Technol., 2002, (7): 45
Ono, H. and Deng, Y.J., Colloid Interf. Sci., 1997, 188: 183
Alince, B., Arnoldova, P. and Frolik, R., J. Appl. Polym. Sci., 2000, 76: 1677
Güven, G., Tuncel, A. and Piskin, E., Colloid Polym. Sci., 2004, 282: 708
Liu, Z., Xiao, H. and Wiseman, N., J. Appl. Polym. Sci., 2000, 76: 1129
Negai, K. and Ohishi, Y., J. Polym. Sci. Part A, 1987, 25: 1
Luo, Y. and Schork, F.J., J. Polym. Sci. Part A, 2001, 39: 2696
Ming, W., Jones, F.N. and Fu, S., Polym. Bull., 1998, 40: 749
Landfester, K., Bechthold, N., Tiarks, F. and Antonietti, M., Macromolecules, 1999, 32: 2679
Ferrick, M.R., Murtagh, J. and Thomas, J.K., Macromolecules, 1989, 22: 1515
Ramos, J., Martin-Molina, A., Sanz-Izquierdo, M.P., Rus, A., Borque, L., Hidalgo-Alvarez, R., Galisteo-Gonzalez, F. and Forcada, J., J. Polym. Sci. Part A, 2003, 41: 2404
Xu, Y., Higgins, B. and Brittain, W.J., Polymer, 2005, 46: 799
Elaissari, A., Holt, L., Meunier, F., Voisset, C., Pichot, C., Mandrand, B. and Mabilat, C., J. Biomater. Sci. Polym. Ed., 1999, 10: 403
Voorn, D., Ming, W. and van Herk, A.M., Macromolecules, 2005, 38: 3653
Sui, Z., Jaber, J.A. and Schlenoff, J.B., Macromolecules, 2006, 39: 8145
Schumacher, H.C., Alves, M., Leite, C.A.P., Santos, J.P., Neto, É.T., Murakami, M., Galembeck, F. and do Amaral, M., J. Colloid Interf. Sci., 2007, 305: 256
Ramos, J. and Forcada, J., Polymer, 2006, 47: 1405
Zhang, L., Zhu, X., Zou, D. and Kong, X.Z., Acta Polymerica Sinica (in Chinese), 2010, (5): 601
Yang, T., Xu, Y., Li, P., Chen, M., Peng, H. and Cheng S., Acta Polymerica Sinica (in Chinese), 2009, (4): 309
Negai, K. and Ohishi, Y., J. Polym. Sci. Part A, 1987, 25: 1
Liu, J., Li, X. and Jiao, S., China Synth. Rubber Industry, 1997, 20(3): 150
Zhang, L., Yang, Y., Zhu, X. and Kong, X.Z., J. Appl. Polym. Sci., 2012, DOI: 10.1002/app.35557
Wang, J., Zhu, X., Zhang, Z. and Kong, X.Z., Acta Polymerica Sinica (in Chinese), 2006, (7): 903
Huang, X.R., Yang, J.H., Zhang, W.J., Zhang, Z.Y. and An, Z.S., J. Chem. Edu., 1999, 76: 93
Maiti, P.K. and Kremer, K., Langmuir, 2000, 16: 3784
Fitch, R.M. and Tsai, C.H., in “Polymer colloids”, ed. by Fitch, R.M., Plenum Press, New York, 1971, p. 73
Author information
Authors and Affiliations
Corresponding author
Additional information
This work was supported by the Natural Science Foundation of Shandong Province, China (No. Z2008B07) and by the National Natural Science Foundation of China (No. 20874040).
Rights and permissions
About this article
Cite this article
Zou, D., Li, Xf., Zhu, Xl. et al. Preaparation of cationic latexes of poly(styrene-CO-butyl acrylate) and their properties evolution in latex dilution. Chin J Polym Sci 30, 278–286 (2012). https://doi.org/10.1007/s10118-012-1113-7
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10118-012-1113-7