Skip to main content

Advertisement

Log in

Three-dimensional morphology study of surgical adolescent idiopathic scoliosis patient from encoded geometric models

  • Original Article
  • Published:
European Spine Journal Aims and scope Submit manuscript

Abstract

Purpose

The classification of three-dimensional (3D) spinal deformities remains an open question in adolescent idiopathic scoliosis. Recent studies have investigated pattern classification based on explicit clinical parameters. An emerging trend however seeks to simplify complex spine geometries and capture the predominant modes of variability of the deformation. The objective of this study is to perform a 3D characterization and morphology analysis of the thoracic and thoraco/lumbar scoliotic spines (cross-sectional study). The presence of subgroups within all Lenke types will be investigated by analyzing a simplified representation of the geometric 3D reconstruction of a patient’s spine, and to establish the basis for a new classification approach based on a machine learning algorithm.

Methods

Three-dimensional reconstructions of coronal and sagittal standing radiographs of 663 patients, for a total of 915 visits, covering all types of deformities in adolescent idiopathic scoliosis (single, double and triple curves) and reviewed by the 3D Classification Committee of the Scoliosis Research Society, were analyzed using a machine learning algorithm based on stacked auto-encoders. The codes produced for each 3D reconstruction would be then grouped together using an unsupervised clustering method. For each identified cluster, Cobb angle and orientation of the plane of maximum curvature in the thoracic and lumbar curves, axial rotation of the apical vertebrae, kyphosis (T4–T12), lordosis (L1–S1) and pelvic incidence were obtained. No assumptions were made regarding grouping tendencies in the data nor were the number of clusters predefined.

Results

Eleven groups were revealed from the 915 visits, wherein the location of the main curve, kyphosis and lordosis were the three major discriminating factors with slight overlap between groups. Two main groups emerge among the eleven different clusters of patients: a first with small thoracic deformities and large lumbar deformities, while the other with large thoracic deformities and small lumbar curvature. The main factor that allowed identifying eleven distinct subgroups within the surgical patients (major curves) from Lenke type-1 to type-6 curves, was the location of the apical vertebra as identified by the planes of maximum curvature obtained in both thoracic and thoraco/lumbar segments. Both hypokyphotic and hyperkypothic clusters were primarily composed of Lenke 1–4 curve type patients, while a hyperlordotic cluster was composed of Lenke 5 and 6 curve type patients.

Conclusion

The stacked auto-encoder analysis technique helped to simplify the complex nature of 3D spine models, while preserving the intrinsic properties that are typically measured with explicit parameters derived from the 3D reconstruction.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3

Similar content being viewed by others

References

  1. Ponseti IV, Friedman B (1950) Prognosis in idiopathic scoliosis. J Bone Joint Surg Am 32(2):381–395

    Google Scholar 

  2. King HA, Moe JH, Bradford DS, Winter RB (1983) The selection of fusion levels in thoracic idiopathic scoliosis. J Bone Joint Surg 65(9):1302–1313

    CAS  PubMed  Google Scholar 

  3. Lenke LG, Betz RR, Harms J, Bridwell KH, Clements DH, Lowe TG, Blanke K (2001) Adolescent idiopathic scoliosis. J Bone Joint Surg 83(8):1169–1181

    PubMed  Google Scholar 

  4. Labelle H, Aubin CE, Jackson R, Lenke L, Newton P, Parent S (2011) Seeing the spine in 3D: how will it change what we do? J Pediatr Orthopaed 31:S37–S45

    Article  Google Scholar 

  5. Stokes IA (1994) Three-dimensional terminology of spinal deformity: a report presented to the scoliosis research society by the scoliosis research society working group on 3-D terminology of spinal deformity. Spine 19(2):236–248

    Article  CAS  PubMed  Google Scholar 

  6. Poncet P, Dansereau J, Labelle H (2001) Geometric torsion in idiopathic scoliosis: three-dimensional analysis and proposal for a new classification. Spine 26(20):2235–2243

    Article  CAS  PubMed  Google Scholar 

  7. Kadoury S, Shen J, Parent S (2014) Global geometric torsion estimation in adolescent idiopathic scoliosis. Med Biol Eng Comput 52(4):309–319

    Article  PubMed  Google Scholar 

  8. Sangole AP, Aubin CE, Labelle H, Stokes IA, Lenke LG, Jackson R, Newton P (2009) Three-dimensional classification of thoracic scoliotic curves. Spine 34(1):91–99

    Article  PubMed  Google Scholar 

  9. Duong L, Mac-Thiong JM, Cheriet F, Labelle H (2009) Three-dimensional subclassification of Lenke type 1 scoliotic curves. J Spinal Disord Tech 22(2):135–143

    Article  PubMed  Google Scholar 

  10. Duong L, Cheriet F, Labelle H (2006) Three-dimensional classification of spinal deformities using fuzzy clustering. Spine 31(8):923–930

    Article  PubMed  Google Scholar 

  11. Kadoury S, Labelle H (2012) Classification of three-dimensional thoracic deformities in adolescent idiopathic scoliosis from a multivariate analysis. Eur Spine J 21(1):40–49

    Article  PubMed  Google Scholar 

  12. van der Maaten LJ, Postma EO, van den Herik HJ (2009) Dimensionality reduction: a comparative review. J Mach Learn Res 10(1–41):66–71

    Google Scholar 

  13. Kadoury S, Cheriet F, Labelle H (2009) Personalized X-ray 3-D reconstruction of the scoliotic spine from hybrid statistical and image-based models. IEEE Trans Med Imaging 28(9):1422–1435. doi:10.1109/TMI.2009.2016756

    Article  PubMed  Google Scholar 

  14. Humbert L, De Guise JA, Aubert B, Godbout B, Skalli W (2009) 3D reconstruction of the spine from biplanar X-rays using parametric models based on transversal and longitudinal inferences. Med Eng Phys 31(6):681–687

    Article  CAS  PubMed  Google Scholar 

  15. Vincent P, Larochelle H, Lajoie I, Bengio Y, Manzagol PA (2010) Stacked denoising autoencoders: learning useful representations in a deep network with a local denoising criterion. J Mach Learn Res 11:3371–3408

    Google Scholar 

  16. Vincent P, Larochelle H, Bengio Y, Manzagol PA (2008) Extracting and composing robust features with denoising autoencoders. In: Proceedings of the 25th international conference on machine learning. ACM, pp 1096–1103

  17. Arthur D, Vassilvitskii S (2007) k-means++: the advantages of careful seeding. In: Proceedings of the eighteenth annual ACM-SIAM symposium on discrete algorithms. Society for Industrial and Applied Mathematics, pp 1027–1035

  18. Ray S, Turi RH (1999) Determination of number of clusters in k-means clustering and application in colour image segmentation. In: Proceedings of the 4th international conference on advances in pattern recognition and digital techniques, pp 137–143

  19. Stokes IA, Bigalow LC, Moreland MS (1986) Measurement of axial rotation of vertebrae in scoliosis. Spine 11(3):213–218

    Article  CAS  PubMed  Google Scholar 

  20. Legaye J, Duval-Beaupere G, Hecquet J, Marty C (1998) Pelvic incidence: a fundamental pelvic parameter for three-dimensional regulation of spinal sagittal curves. Eur Spine J 7(2):99–103

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  21. Morrison DG, Chan A, Hill D et al (2015) Correlation between Cobb angle, spinous process angle (SPA) and apical vertebrae rotation (AVR) on posteroanterior radiographs in adolescent idiopathic scoliosis (AIS). Eur Spine J 24(2):306–312

    Article  PubMed  Google Scholar 

  22. Mangone M, Raimondi P, Paoloni M et al (2013) Vertebral rotation in adolescent idiopathic scoliosis calculated by radiograph and back surface analysis-based methods: correlation between the Raimondi method and rasterstereography. Eur Spine J 22(2):367–371

    Article  PubMed  Google Scholar 

  23. Keenan BE, Izatt MT, Askin GN, Labrom RD, Pearcy MJ, Adam CJ (2014) Supine to standing Cobb angle change in idiopathic scoliosis: the effect of endplate pre-selection. Scoliosis. doi:10.1186/1748-7161-9-16

  24. Hill S, Franco-Sepulveda E, Komeili A, Trovato A, Parent E, Hill D, Lou E, Adeeb S (2014) Assessing asymmetry using reflection and rotoinversion in biomedical engineering applications. Proc Inst Mech Eng H 228(5):523–529

    Article  PubMed  Google Scholar 

Download references

Acknowledgments

This paper was supported in part by the CHU Sainte-Justine Academic Research Chair in Spinal Deformities, the Canada Research Chair in Medical Imaging and Assisted Interventions, the 3D committee of the Scoliosis Research Society, the Natural Sciences and Engineering Research Council of Canada and the MEDITIS training program.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Samuel Kadoury.

Ethics declarations

Conflict of interest

The authors have no potential conflict of interest.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Thong, W., Parent, S., Wu, J. et al. Three-dimensional morphology study of surgical adolescent idiopathic scoliosis patient from encoded geometric models. Eur Spine J 25, 3104–3113 (2016). https://doi.org/10.1007/s00586-016-4426-3

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00586-016-4426-3

Keywords

Navigation